POSTER PRESENTATIONS
PHYSICAL AND MECHANICAL METALLURGY
PMM -1
Blagoj Rizov, Jon Magdeski , Ruzica Manojlovic
INTERMETALLIC COMPOUND LAYER FORM AND GROWTH AT THE
INTERFACE OF SOLID IRON WITH MOLTEN ALUMINUM
PMM -2
Boyan Yordanov
TRANSITIONAL METALS CARBIDES OBTAINING AT
ELECTROTHERMAL ROTARY BED CONDITIONS
PMM -3
Ersoy Erişir, Oğuz Gürkan Bilir
EFFECT OF INITIAL MICROSTRUCTURE ON MICROSTRUCTURE FOR A
MEDIUM CARBON DUAL PHASE STEEL
PMM -4
Bogdan Ranguelov, Aleksander Karamanov
CRYSTALLIZATION INDUCED POROSITY FROM MONATOMIC MELTS –
2D AND 3D MONTE CARLO SIMULATIONS
PMM -5
Ljubica Radović, Milutin Nikačević, Branka Jordović
GRAIN SIZE EVALUATION IN Al-Mg-Mn ALLOYS
PMM -6
Yavor Lukarski, Hristo Argirov
NEW STEEL BRAND INTENDED FOR PRODUCTION OF HAMMERS FOR
FRAGMENTATION OF LIGNITE COALS
PMM -7
Fulya Kahrıman, Muzaffer Zeren
AN MICROSCOPIC INVESTIGATION OF ZrADDITIONON THE
RECRYSTALLIZATION BEHAVIOR OF 6082 ALUMINUM ALLOY
PMM -8
Gülşah Aktaş, Şeyda Polat, Ş. Hakan Atapek
COMPARISON OF THE STRUCTURES, PROPERTIES AND WEAR
CHARACTERISTICS OF HEAT TREATED HOT WORK TOOL STEELS
USED AS DIE MATERIALS
PMM -9
Gözde Sultan Altuğ, Şeyda Polat
EVALUATION OF PHYSICAL AND MICROSTRUCTURAL PROPERTIES
OF APRECIPITATION HARDENED CuCoNiBe ALLOY
PMM -10
Şeyda Polat, Gözde Sultan Altuğ
MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATION OF
APRECIPITATION HARDENED CuCrZr ALLOY
PMM -11
Ersoy Erişir, Oğuz Gürkan Bilir
EFFECT OF AUSTENIZATION TEMPERATURE AND TIME ON DUAL
PHASE MICROSTRUCTURE FOR A MEDIUM CARBON DUAL PHASE
STEEL
PMM -12
Enbiya Türedi, Ersoy Erişir, Oğuzgürkan Bilir
THE EFFECT OF HEAT TREATMENT ON TRIBOLOGICAL PROPERTIES
OF HIGH SPEED STEELS
PMM -13
Miodrag Arsić, Mladen Mladenović, Zorica Kovačević, Zoran Savić, Zivće Šarkoćević
ANALYSIS REGARDING THE CAUSES OF DAMAGE OCCURRENCE AT
RUNNER BLADES AND RUNNER SHIELD OF HYDROELECTRIC
GENERATING SET A6, DJERDAP 1
PMM -14
Dimko Dimeski, Vineta Srebrenkoska
THE ROLE OF CONTEMPORAY FERROUS AND NONFERROUS
MATERIALS IN BALLISTIC PROTECTION OF MILITARY VEHICLES
PMM -15
Srećko Manasijević, Natalija Dolić, Zdenka Zovko Brodarac, Mile Djurdjevic,
Radomir Radiša
AN INTERMETALLIC BONDING BETWEEN AN ALUMINUM PISTON
ALLOY AND A RING CARRIER
PMM -16
Milenko Rimac, Mirsada Oruč, Jan Primoţ
MICROSTRUCTURE OF THE METALLIC COATINGS USING HVOF
DIAMOND JET NiCrAlY APPLIED TO THE SUPERALLOY A286
PMM -17
Dimko Dimeski, Vineta Srebrenkoska
A COMPARISON OF PENETRATION MECHANICS OF METAL AND
FIBER/RESIN COMPOSITE TARGETS AGAINST BALLISTIC IMPACT
PMM -18
Tomi Madjarov , Ventseslav Toshkov
ON THE ION NITRIDING OPTIMISATIONOF THE HP COBALT ALLOY
PMM -19
Gözde Sultan Altuğ , Şeyda Polat
EVALUATION OF PHYSICAL AND MICROSTRUCTURAL PROPERTIES
OF A PRECIPITATION HARDENED CuCoNiBe ALLOY
EXTRACTIVE METALLURGY
EM -1
Branislav Marković, Miroslav Sokić, Vladislav Matković, Dragana Ţivković, Dragan
Manasijević, Nada Štrbac, Vaso Manojlović
THERMODYNAMIC AND KINETIC ANALYSIS OF THE CHLORINATION OF
COPPER (I) SULPHIDE IN THE Cu2S-CaCl2-O2SYSTEM
EM -2
D. Grigorova, R. Paunova, D. Stoyanov
PELLETIZATION OF IRON CONTAINING WASTE SLAG
EM -3
R. Alexandrova, R. Paunova, D. Grigorova, M. Marinov
INVESTIGATION OF THE KINETIC ON THE SYSTEM FeO-V2O5-MnO AT
NON-ISOTHERMAL HEATING
EM -4
Miroslav Sokić, Branislav Marković, Vladislav Matković, Nada Štrbac, Ţeljko
Kamberović, Dragana Ţivković, Vaso Manojlović
LEACHING OF COMPLEX SULPHIDE CONCENTRATE IN OXIDATIVE
SULPHURIC ACID SOLUTION
EM -5
T. Nikoloski, B. Krstevski, I. Bogeski
AMPLIFICATION OF ASSORTMENT OF HOT ROLLED PLATE
MANUFACTURE FROM HIGH CARBON STEEL FOR THERMAL
PROCESSING, INTENDED FOR MECHANICAL CONSTRUCTION
EM -6
G. Petrovski, B. Krstevski, I. Bogeski
QUALITY OF SECONDARY RAW-WASTE SCRAP METAL PROCESSING,
COMPARISON OF DELIVERED MATERIALS – MACEDONIA –REGION
EM -7
Aleksandar Apostolov, Goran Načevski
CONCENTRATION OF Ni FROM NICKEL OXIDE ORES USING MAGNETIC
SEPARATION METHOD
PLASTIC DEFORMATION AND METAL PROCESSING
PDMP -1
Sibel Daglilar, Sinem Yildirim
EFFECT OF LAMINAR COOLING PARAMETERS ON MARTENZITE
VOLUME FRACTION AND MECHANICAL PROPERTIES OF HOT
ROLLED DUAL PHASE STEEL
PDMP -2
Erdem Karakulak, Rıdvan Yamanoğlu, Muzaffer Zeren, Emirhan Evren Dündar
PRODUCTION AND CHARACTERIZATION OF HOT PRESSED Al-Ni
ALLOYS
PDMP -3
Lubomir Anestiev, Jordan Georgiev, Marcela Selecká
AN INVESTIGATION OF THE KINETIC PROCESSES AT SINTERING OF
IRON POWDERS ALLOYED WITH CARBON. A COMPARATIVE STUDY
USING DTA, TGA AND MASS SPECTROMETRY TECHNIQUES
PDMP -4
Ruzica Manojlovic, Ratko Ilievski, Zlatanka Martinova
COMPARATIVE ANALYSIS OF THE MATHEMATICAL AND
EXPERIMENTAL DETERMINED PARAMETERS OF THE SPREAD
DURING ROLLING OF METAL MATERIALS
PDMP -5
Ruzica Manojlovic, Ratko Ilievski
EFFECT OF DEFORMATION PARAMETERS OF HOT ROLLING ON THE
MECHANICAL PROPERTIES OF STEEL SHEETS
PDMP -6
Niko Karsikas, L. Pentti Karjalainen
INNOVATIVE LASER COLORING OF STAINLESS STEELS FOR
CONSUMER PRODUCTS
PDMP -7
Zvonko Gulišija, Marija Mihailović, Aleksandra Patarić, Zoran Janjušević, Milentije
Stefanović
HOT FORGING OF Al ALLOYS CASTED UNDER THE INFLUENCE OF
ELECTROMAGNETIC FIELD
PDMP -8
Marija Mihailović, Aleksandra Patarić, Zvonko Gulišija, Zoran Janjušević, Milentije
Stefanović
APPLICATION OF NUMERICAL SIMULATIONS FOR Al ALLOYS HOT
FORMING
PDMP -9
Igor Krpacovski
HDGL FURNACE REVAMPING
PDMP -10
Cristinel Eni, Vasile Miron, Tamara Radu
PRODUCTION OF COLD ROLLED STRIPS WITH DIMENSIONAL
CHARACTERISTICS OF PLASTICITY AND SURFACE QUALITY
SUITABLE FOR COATING WITH PROTECTIVE LAYERS
PDMP -11
Dean Brkovski, Sveto Cvetkovski
WEARING OFF TRUCK SHOES FROM BULLDOZER MOVING SYSTEM
DEPENDING ON OPERATING CONDITIONS (WORKING MATERIAL)
PDMP -12
Ratko Ilievski, Bobi Krstevski, Zoran Apostolovski
DEVELOPMENT OF A MATHEMATICAL MODEL FOR PREDICTING THE
RESTART TEMPERATURE FOR THERMOMECHANICAL CONTROL
ROLLING OF THE TINNER PLATES DEPENDING OF PLATE TARGET
DIMENSIONS
WELDING
W -1
B. Medjo, E. Dončeva, M. Rakin, A. ĐurĎević, A. Sedmak
FRACTURE RESISTANCE OF SURFACE-CRACKED WELDED TENSILE
SPECIMENS
W -2
Jukka Pakkanen, Mustafa Kičinand Rudolf Vallant
EXPERIMENTAL INVESTIGATION AND NUMERICAL SIMULATION OF
RESISTANCE SPOT WELDING FOR RESIDUAL STRESS EVALUATIONOF
DP1000 STEEL
W -3
Plamen Tashev, Asen Tasev, Marina Manilova, Yavor Lukarski
METHODOLOGY FOR DETERMINATION OF THE TECHNOLOGICAL
PROCESS PARAMETERS OF CROSS-WIRE RESISTANCE WELDING
W -4
Rrahim Maksuti, Mursel Rama, Hamid Mehmeti
SOME VISUAL AND MICROSCOPIC ASPECTS OF FRACTURE SURFACES
OF HIGH FREQUENCY ELECTRIC RESISTANCE WELDED STEEL PIPES
AFTER DESTRUCTIVE TESTING
W -5
Orce Popovski, Vuk Petrović, Stojadin Petrović
PRODUCTION OF MULTI-LAYERED METALS BY CLADDING
W -6
Sveto Cvetkovski
INVESTIGATION AND REPARATIVE WELDING OF PREASURE VESSEL FOR
CRUDE OIL SEPARATION
CASTING OF METALS
CM -1
Aleksandra Patarić, Marija mihailović, Zvonko Gulišija, Zoran Janjišević
THE SUPER HIGH STRENGHT ALUMINUM ALLOY PROPERTIES CASTED
WITH EMF
CM -2
Zoran Janjušević, Zvonko Gulišija, Marija. Mihailović, Aleksandra Patarić
THE INFLUENCE OF PROCESSES AT METALL-MOLD INTERFACE ON
THE CASTINGS QUALITY
CM -3
Erdem Karakulak, Rıdvan Yamanoğlu, Funda Gül Koç, Muzaffer Zeren
MECHANICAL PROPERTIES OF Al-Ni CAST ALLOYS
CM -4
Blagoj Rizov, Ruzica Manojlovic, Jon Magdeski
ON THE INTERACTION AND DISSOLUTION OF SOME TRANSITION
METALS IN LIQUID ALUMINUM AND FORMATION OF INTERMETALLIC
PHASES
CM -5
Radomir Radiša, Srećko Manasijević, Janez Pristavec, Vesna Mandić
USING MAGMA5 TO OPTIMIZE RELEVANT TECHNOLOGICAL
PARAMETERS OF THE PROCESS OF CASTING THE HOUSING OF LED
LAMP FOR STREET LIGHTING
CORROSION AND PROTECTION OF METALS
CPM -1
Irena Mickova, Abdurauf Prusi, Ljubomir Arsov
ELLIPSOMETRIC STUDY OF CORROSION REACTIONS AT THE
INTERFACE TITANIUM KOH SOLUTIONS
CPM -2
Irena Mickova
NIOBIUM IN CORROSIVE APPLICATIONS
CPM -3
Irena Mickova
OPTICAL PROPERTIES OF TITANIUM-NIOBIUM-TANTALUM AE ALLOY
CPM -4
Kemal Delijić, Boštjan Markoli
SOME ASPECTS OF FORMABILITY AND CORROSION PROPERTIES OF
SOME Al-Mg-Mn AND Al-Mg-Si ALLOYS FOR AUTOMOTIVE APPLICATION
CPM -5
Ţarko Ivanovski
EVOLUTION OF CHEMICAL TREATMENT ON ORGANIC COATING LINE
IN ARCELORMITTAL SKOPJE
CPM -6
Zagorka Koneska, Dafinka Stoevska - Gogovska
CORROSION BEHAVIOR OF LOW CARBON STEEL NITRIDED BY PLASMA
CPM -7
Tsanka Dikova, Diana Tsaneva, Mariana Ilieva, Natalina Panova
ELECTRO-CHEMICAL CORROSION OF LASER MELTED LAYERS OF
STAINLESS STEEL IN RINGER SOLUTION
PROCESS ENGINEERING AND MANAGEMENT
PEM -1
Kiril Lisichkov, Mirko Marinkovski, Stefan Kuvendziev, Gjorgji Zhezhov, Jeton Kuchi
EQUILIBRIUM STUDY FOR REMOVAL OF AMMONIUM IONS FROM
AQUEOUS SOLUTION BY ZEOLITE TYPE 4A
PEM -2
Kiril Lisichkov, Mahi Ljatifi, Stefan Kuvendziev, Mirko Marinkovski
SEPARATION OF CADMIUM IONS FROM AQUEOUS SOLUTION BY USING
RICE HUSK AS A BIOSORBENT
PEM -3
Afrodita Zendelska, Mirjana Golomeova, Krsto Blazev, Boris Krstev, Blagoj Golomeov,
Aleksandar Krstev, Shaban Jakupi
EQUILIBRIUM STUDIES OF MANGANESE REMOVAL FROM AQUEOUS
SOLUTION BY ADSORPTION ON NATURAL ZEOLITE
PEM -4
Ana Zhabevska Zlatevski, Beti Andonovic, Aleksandar Dimitrov
RELATION OF THE NEW MANAGERS SURVEY RESULTS TO THE
CRITERIA BASED ON EXPERIENCED TOP MANAGERS RESEARCH
RESULTS IN TERMS OF THEIR SUCCESS ASSESSMENT
PEM -5
Attila Alkan, Muzaffer Zeren, Şeyda Polat
EVALUATION OF THE PHYSICAL AND MECHANICAL PROPERTIES OF
RUBBER COMPOUNDS REINFORCED WITH A RAMID-BASED MATERIALS
PEM -6
Ţeljka Marjanović-Balaban, Radoslav Grujić, Kiril Lisickov, Dragan Vujadinović,
Midhat Jašić
MATERIALS IN CONTACT WITH FOOD AS A CAUSE OF FOOD
CONTAMINATION
NANOMATERIALS AND NANOTECHNOLOGIES
NN -1
Nilgun Kuskonmaz, Zeynep Taslicukur Ozturk
THE EFFECT OF SINTERING PRESSURE AND TEMPERATURE ON
GRAIN GROWTH IN HIGH PRESSURE SINTERED ALUMINA COMPACTS
NN -2
Ivania Markova, Tihomir Petrov, Valentina Milanova, Vladislava Stefanova, Ivan
Denev
INTERMETALLIC NANOPOWDER SYNTHESIZED THROUGH A
TEMPLATE BOROHYDRIDE REDUCTION USING A CARBON-BASED
SUPPORT
NN -3
S. Gümüş, Ş. Polat, J. M. Lackner, W. Waldhauser
EFFECT OF ELASTIC MODULUS OF NANOLAYERS ON SURFACE
MORPHOLOGY FOR VACUUM COATED POLYMERIC BIOMATERIALS
NN -4
ÜmranErten, SibelZor, H. İbrahim Ünal, Ş. Hakan Atapek
EFFECT OF NANO COMPOSITE COATING ON THE CORROSION
BEHAVIOR OF ST 37 STEEL
NN -5
P. Paunović, A. Petrovski, A. Grozdanov, M. Marinkovski, G. Načevski
BOTTOM-UP APPROACH FOR PRODUCING NON-STOICHIOMETRIC
TITANIUM OXIDES
NN -6
Beti Andonović, Aleksandar Dimitrov, Anita Grozdanov, Aleksandar Petrovski, Perica
Paunović
DETERMINING THE NUMBER OF GRAPHENE LAYERS USING
SPECTROSCOPIC DATA
NN -7
A.Tomova, A. Grozdanov, P. Paunović, V. Rafajlovska, D. Dimitrovski, M. Avella,
M. E. Errico, G. Gennaro, A. T. Dimitrov
PRODUCTION AND CHARACTERIZATION OF MULTI NANOSENSORS
BASED ON MWCNTS AND BIOPOLYMER MATRIX
NN -8
Despina Spasevska, Radmila Tomovska, Jadranka Blazevska Gilev
DMA STUDY OF P(MMA/BA)/REDUCED GRAPHENE OXIDE
NANOCOMPOSITES SYNTHESIZED VIA EMULSION MIXING
TECHNIQUE
NN -9
Gordana Siljanovska Petreska, Radek Fajgаr, Jadranka Blazevska Gilev
THIN DEPOSITED NANOCOMPOSITE FILMS OBTAINED BYPULSED IR
LASER ABLATION
NEW AND ADVANCED MATERIALS
NAM -1
C. Betül Emrullahoğlu Abi, Banu Yavuz, Onur Mat
AN INVESTIGATION ON THE PHASE ANALYSES OF ALUMINAZIRCONIA DENTAL MATERIALS
NAM -2
V.M.Maksimović, A.D.Čairović, M.M.Stoiljković, I.Lj. Cvijović-Alagić
CHANGE OF THE Co-Cr DENTAL ALLOY STRUCTURE UPON
RECASTING
NAM -3
I. Cvijović-Alagić, Z. Cvijović, M. Rakin
THERMO-MECHANICAL PROCESSING EFFECT ON TRIBOMECHANICAL PROPERTIES OF BIOMEDICAL TI-BASED ALLOY
ENVIRONMENTAL PROTECTION
EP -1
Mirjana Stojanović, Marija Mihajlović, Jelena Petrović, Marija Petrović, Tanja
Šoštarić, Zorica Lopičić, Jelena Milojković
MODIFIED ZEOLITE/RAW PHOSPHATE COMPOSITE AS A NATURAL
FERTILIZER AND SOIL REMEDIATION AMENDMENT
EP -2
Anita Grozdanov, Nikola Neskovski, Mirko Marinkovski, Gorgi Zezov, Kiril Lisickov
SIMULATION OF ENERGY PRODUCTION FROM PLASTIC WASTE MACEDONIAN CASE STUDY
EP -3
B. Cekova, V. Markoska, B. Apostolova
CHARACTERIZATION AND APPLICATION OF ZEOFIT
EP -4
Ahmet Coşkun
ENVIRONMENTAL GREEN SYNTHESIS OF SOME THIAZOLE AND
AMINOTHIAZOLE COMPOUNDS USING Bu4NCl AS A CATALYST
EP -5
B. Bliznakovska, K. Atkovska, G. Ruseska, S. Bogoevski, B. Boskovski
SEASONAL VARIATION OF HEAVY METALS CONCENTRATION IN THE
UNDERGROUND WATERS ON MSWL DRISLA SITE
WASTE MINIMIZATION AND RECYCLING
WMR -1
Vladislav Matković, Miroslav Sokić, Branislav Marković, Vaso Manojlović
RECYCLING OF HAZARDOUS WASTE FROM GALVANIZATION
WMR -2
Şeyda Polat, Fulya Kahrıman
THE CHARACTERIZATION OF ELECTRIC ARC FURNACE SLAG FOR
RECYCLING PURPOSES
WMR -3
Georgiana Moise, F.Stoiciu, Ildiko Anger, M. Mihalache, L. Ilie, Eugenia Gament,
Mariana Marinescu, Lavinia Popescu, Eniko Volceanov, Fl. Zaman
A NEW POSSIBILITY FOR USE OF STEEL (LF) SLAG
WMR -4
Raman Aliti, Katerina Rajcevska, Perica Paunović, Anita Grozdanov
FLY ASH POLYMER COMPOSITES
INORGANIC AND REFRACTORY MATERIALS
IRM -1
C. Betül Emrullahoğlu Abi, E. Gamze Yazici
EFFECTS OF MAGNESIUM CLORIDE ADDITION ON STABILIZATION
OF ZIRCONIA
IRM -2
C. Betül Emrullahoğlu Abi, Feyza Terzier
OPTIMISATION OF BORIC ACID AMOUNT FOR FINE AND LOW SODA
REACTIVE ALUMINA PRODUCTION: EFFECTS OF GRINDING AND
BORIC ACID AMOUNT
IRM -3
Isil Kerti, Gökce Sezen, Ayfer Kilicarslan, Sibel Daglilar
AUTOCATALYTIC NI-P AND NI-B DEPOSITION ON B4C AND SIC
CERAMIC PARTICLES
IRM -4
Andreea Mitu, Luminita Mara, Andrei Sarbu, Anita Laura Radu, Georgiana Moise,
Enache Lenuta, Viorel Badilita, Valentin Dragut, Florin Stoiciu, Mihai Ghita, Victoria
Soare
RESEARCH REGARDING SYNTHESIS AND PHYSICAL AND CHEMICAL
CHARACTERIZATION ASPECTS ON MESOPOROUS SILICA MATERIALS
OBTAINED FROM A WASTE NATURAL SERPENTINITE ROCKS
IRM -5
Selin Engürlü, Zeynep Taşlıçukur Ozturk, Nilgün Kuşkonmaz
ENHANCEMENT OF THE SINTEREBILITY OF SEYDISEHIR ALUMINA
IRM -6
Gürel S.B., Emrullahoğlu Abi C.B., Saraçoğlu S., Emrullahoğlu Ö.F.
PRODUCTION OF MA SPINEL AND CA CEMENT COMPOSİTE - EFFECT
OF ALUMINA ADDITION
IRM -7
Gürel S.B., Emrullahoğlu Abi C.B., Saraçoğlu S., Emrullahoğlu Ö.F.
PRODUCTION OF ALUMINA-ALUMINUM TITANATE COMPOSITE
IRM -8
Emrullahoğlu Abi C.B., Gürel S.B.,Şahin E., Emrullahoğlu Ö.F.
PRODUCTION OF CORDIERITE CERAMIC FROM OLIVINE- EFFECT OF
ALUMINA ADDITIVE
IRM -9
Emilia Karamanova, Stela Atanasova-Vladimirova, Georgi Avdeev, Alexander
Karamanov
STRUCTURE AND PHASE COMPOSITION OF NEW BUILDING
CERAMICS FROM INDUSTRIAL WASTES WITH IMPROVED
PROPERTIES
IRM -10
Ejup Ljatifi, Alexandra Kamusheva, Alexander Karamanov, Anita Grozdanov, Perica
Paunović
EVALUATION OF PRODUCTION THERMAL CYCLE OF GLASSCERAMICS BY FERRO-NICKEL WASTES
IRM -11
Vaso Manojlović, Vladislav Matković, Miroslav Sokić, Branislav Marković
PROCEDURES FOR OBTAINING OF MAGNESIA FROM SEAWATER
IRM -12
Yasemin Tabak, Şeyda Polat, Ayşen Kılıç, Bayise K.Vatansever, Halil İ.Bakan
EFFECT OF SINTERING TEMPARETURE ON ALUMINA CERAMICS
PRODUCED BY TAPE CASTING
IRM -13
Emilija Fidancevska, Biljana Angjusheva, Vojo Jovanov
SINTERING OF FLY ASH BASED CERAMICS
IRM -14
Biljana Angjusheva, Vojo Jovanov, Emilija Fidancevska
CHARACTERIZATION OF GLASS-CERAMICS COMPOSITIES PRODUCED
FROM COAL FLY ASH AND WASTE GLASS
EDUCATION
EDU -1
Sonja Čerepnalkovska
STANDARDS ARE THE BASIS FOR IMPROVEMENT AND QUALITY
ASSURANCE
Download

poster presentations