ICMEM 2014 Technical program – HIGH TATRAS
Welcome to ICMEM 2014 and workshop Water Jet for Horizon2020 held in High Tatras
The place of mysteries,
the place of never-ending fairytales
and beautiful nature.
Conference is supported by the Slovak Research and Development Agency under the contract No. APVV-0207-12
Final program of ICMEM 2014
INSTRUCTIONS, GENERAL INFORMATION FOR DELEGATES
Date and venue
The second announcement contains a list of accepted papers suggested by the reviewers for publishing and
presentation at the International Conference of Manufacturing Engineering and Materials to be held during 1st – 5th
September 2014 in Nový Smokovec.
Language, proceedings, poster
The working language of the Conference is English that will be used for all printed materials, presentations and
discussions. The scientific program consists of plenary session, technical sessions and H2020 workshop. The plenary
sessions will be divided into the sections according to conference topics. The presentation is considered to be as an
open review of the submitted lectures. After suggestions from auditorium, the papers will be published in the
redesigned
Journal
of
Manufacturing
and
Industrial
Engineering
http://www.qipjournal.eu/index.php/MIE/issue/view/15.
Accommodation
Please take note that foreign/outstation participants would need to arrange their own transport arrangement to the
venue of the conference. For further information about accommodation, please, contact the secretary of the
conference via e-mail: [email protected] or make you reservation as soon as possible directly at the hotel Atrium
in Nový Smokovec: http://icmem-2014.webnode.sk/venue/.
Conference Fee:
Authors are kindly asked to complete the Registration Form and send it as soon as possible to the conference
secretariat. Please, check your payment of the conference fee. All participants without exceptions have to pay the
conference fee. For each paper, at least one conference fee must be paid, if not, it can happen that the paper will not be
included in the final program. Registration fee covers the entry to all sessions, lunch & tea breaks, conference kits,
proceeding, program, certificate and banquet dinners and accompanying program.
Presentation
For oral presentation, the paper must be presented in MS Power Point or as a Poster. The author or one of
the coauthors is required to present a summary of the paper in max. 10 minutes for oral presentation and 5 minutes for
the Q&A session. The keynote lectures presentation length is max. 20 minutes, including the Q&A session. The softcopy
of your power point presentation should be submitted to the secretariat during the registration at the desk or via
e‐mail: [email protected]
ICMEM 2014 Organisation TEAM
Sergej Hloch
Lucia Knapčíková
Lucie Gurková
Grzegorz Krolczyk
Jolanta Krolczyk
Participants states:
Austria | Bulgaria | Croatia | Czech Republic | Germany | India | Italy | Poland | Serbia | Slovakia | Switzerland | Turkey
Final program of ICMEM 2014
Brief program
Sunday – Monday | 31.08.2014 – 01.09.2014 | Registration | http://www.atriumhotel.sk/en/
12:00 – 22:00
Nový Smokovec 42, Vysoké Tatry 062 01, GPS: 49.137700, 20.215000
ICMEM 2014 | Brief Program
1 September
2 September
7:00
8:30
9:00
Water Jet for
ICMEM 2014
10:30
H2020
Plenary session
10:30
Coffee Break (poster session)
10:45
10:45
Water Jet for
ICMEM 2014
12:30
H2020
Plenary session
12:30
Lunch
14:00
14:00
Water Jet for
ICMEM 2014
15:30
H2020
Plenary session
15:30
Coffee Break (poster session)
16:00
16:00
Water Jet for
ICMEM 2014
17:00
H2020
Plenary session
18:00
Dinner
Dinner
19:30
Free program
Wellness
Social evening:
Knowing Novy
Slovak wine tasting
Smokovec
Bowling
Non-formal
Wellness
discussion
3 September
4 September
5 September
Breakfast
ICMEM 2014
Poster session
Excursion to
Strbske Pleso
Visiting of
Astronomical Institute
of Slovak Academy of
Sciences in
Skalnate Pleso
Lunch
https://www.ta3.sk/l3.php?p3=spo
ICMEM 2014
Conference Closing
Technical details will be given
during registration.
Dinner
Social Evening:
Dinner – Grill Party
Traditional Slovak Folk
Music Vagonar
Free Program
Wellness
Walking to Novy
Smokovec
Hrebienok
Participants states:
Austria | Bulgaria | Croatia | Czech Republic | Germany | India | Italy | Poland | Serbia | Slovakia | Switzerland | Turkey
Check out
Final program of ICMEM 2014
Before Coffee Break 
Monday | September 1st, 2014 | Workshop Water Jet for Horizon2020
8:45 – 9:00
Opening Ceremony
Foldyna Josef, Ing., Ph.D. | Vicehead of Institute of Geonics AS CR, v. v. i., Ostrava
Pude Frank, Prof., Dr. | Inspire corporation, Zurich
Welcome Speeches
HLOCH Sergej
Project Introduction
SK,
CZ
Department of Orthopaedics
J. A. Reiman Faculty Hospital with Policlinics in Prešov
Slovak Republic
Problems in orthopedic surgery during extraction of prostheses
SK
PUDE Frank
Information about activities
D
Information about activities
CZ
Faculty of Manufacturing Technologies TUKE with a seat in
Prešov
Institute of Geonics AS ČR, v.v.i., Ostrava – Poruba
KĽOC Ján
9:00 – 10:30
Workshop Water Jet for Horizon2020
Moderators: Lucie Gurková, Sergej Hloch
Inspire corporation, Zurich
|technical note|
Presentation length is 15 minutes, including Q&A session.
FOLDYNA Josef
Institute of Geonics AS ČR, v.v.i., Ostrava – Poruba
10:30 – 10:45
Enjoy Your Coffee
HVIZDOŠ Pavol
Mechanical characterization and wear of bone cements
SK
Information about activities
RS
SRECKO Krile
Information about activities
HR
MAGUROVÁ Dagmar
Information about activities
SK
Design and Manufacturing
SK
Development of source and distribution of pressure liquid
CZ
Slovak Academy of Sciences
Before Lunch 
SEDMAK Aleksandar
University of Belgrade, Innovation Center of Faculty of
Mechanical Engineering, Belgrade, Serbia
University of Dubrovnik, Croatia
10:45 – 12:30
Faculty of Health Care
Workshop Water Jet for Horizon2020
Moderators: Lucie Gurková, Libor Sitek
Faculty of Manufacturing Technologies TUKE with a seat in
Prešov
|technical note|
The keynote Lectures presentation length is 15 minutes, including
Q&A session.
 12:30 - 14:00
MONKA Peter
HRUŽÍK Lumír,
VAŠINA Martin
VŠB – TU Ostrava
LUNCH
HOTEL ATRIUM
Discussion, information about START - Danube Region Project Fund
Conclusions
Participants states:
Austria | Bulgaria | Croatia | Czech Republic | Germany | India | Italy | Poland | Serbia | Slovakia | Switzerland | Turkey
Final program of ICMEM 2014
TUESDAY | September 2nd, 2014 | ICMEM 2014
8:45 – 9:00
Opening Ceremony
Zajac Jozef, Prof., Eng., PhD. | Dean FMT TUKE, Prešov
Monka Peter, Assoc. Prof. Eng., PhD. | Head of DPT, FMT TUKE, Prešov
Welcome Speeches
CHATTOPADHYAYA Somnath
Department of Mechanical Engineering
Indian School of Mines, Dhandbad
Before Coffee Break 
BARRANS Simon
PEREC Andrzej, KAUFELD Michael,
PUDE Frank, TRIEB Franz
Inspire AG, ETH Zürich, Zurich, Switzerland
Institute of Machine Tools and Manufacturing, ETH Zürich,
Zurich, Switzerland
BHDT GmbH, Kapfenberg, Austria,
SEDMAK Aleksandar
University of Belgrade, Innovation Center of Faculty of
Mechanical Engineering, Belgrade, Serbia
PEREC Andrzej, KAUFELD Michael,
PUDE Frank, WEGENER Konrad
Keynote Lectures
|technical note|
Presentation length is 15 minutes, including Q&A session.
GB
Introductory research into the cutting of Carbon Fiber
Composite using an 1000 MPa Pure Waterjet
Effect of the tilt angle on resistance fracture of friction stir
welded aa 5083 alloy
CH, A
RS
Simulation of accumulator influence on hydraulic shock in long
pipe
CZ
VŠB – TU Ostrava
WINCZEK Jerzy,
ZIOBROWSKI Paweł
The Modelling of the Temperature Field during Surfacing by
Submerged Arc Welding using a Bimodal Heat Source Model
PL
10:30 – 10:45
Enjoy Your Coffee
MONKA Peter
Complexity of Computer Aided Process Planning
SK
Surface Morphology in Production Process
PL
SEDMAK Aleksandar
Influence of choice of crown design on load transfer from
implant to the bone
RS
Moderators: Lucie Gurková, Libor Sitek
KRÓLCZYK Jolanta
The Analysis of Homogeneity of Multicomponent Industrial
Fodder
PL
|technical note|
The keynote Lectures presentation length is 15 minutes, including
Q&A session.
DIMKOW Svetoslav
Remanufacturing of Contract Furniture as Modern Business
Strategy
BG
Reverse Engineering Industrial Application
Experiences Reflected in Education
SK
Faculty of Manufacturing Technologies TUKE with a seat in
Prešov
KRÓLCZYK Grzegorz
Opole University of Technology
Before Lunch 
The structural integrity of turbocharger systems
CH, D
HRUŽÍK Lumír, VAŠINA Martin,
BUREČEK Adam
Moderators: Lucie Gurková, Sergej Hloch
IN
Taguchi Approach Optimization of Steel Surface Roughness in
Abrasive Water Jet Cutting
Inspire AG, ETH Zürich, Zurich, Switzerland
Institute of Production Engineering and Materials Testing,
University of Applied Sciences Ulm, Ulm, Germany
BHDT GmbH, Kapfenberg, Austria,
9:00 – 10:30
Wear Analysis of Cemented Carbide Tools
10:45 – 12:30
University of Belgrade, Innovation Center of Faculty of
Mechanical Engineering, Belgrade, Serbia
Lectures
Opole University of Technology
MONKOVÁ Katarína
Faculty of Manufacturing Technologies TUKE with a seat in
Prešov
 12:30 - 14:00
LUNCH
HOTEL ATRIUM
Participants states:
Austria | Bulgaria | Croatia | Czech Republic | Germany | India | Italy | Poland | Serbia | Slovakia | Switzerland | Turkey
Final program of ICMEM 2014
Monday – Thursday | September 1st – September 5th, 2014 | Further topics for oral presentation
POSTER SESSION
Dimkow Svetoslav
Sayan Chatterjee, Dipak Rajan Poddar
Before Coffee Break 
Gokcen Alev Ciftcioglu
Remanufacturing of Contract Furniture as Modern Business
Strategy
Design Equation of Iris Excited First Iteration Fractal Slot
Antenna in Waveguide Broadwall
Design Equation of Iris Excited First Iteration Fractal Slot
Antenna in Waveguide Broadwall
BG
IN
TR
Knapčíková Lucia, Monka Peter, Hloch Sergej
Composite materials reinforced with fabric from used tyres
SK
Murčinkova Zuzana, Vasilko Karol
Textured Turning
SK
Kumar Ravi, Ghosh Aniruddha, Chattopadhyaya
Emerging friction stir welding for aluminum and its applications
Somnath
Simulation of accumulator influence on hydraulic shock in long
Bureček Adam, Hružík Lumír, Vašina Martin
pipe
Synthesis of Amplitude Taper Beam Steered Linear Array of
Chatterjee Soumyo, Chatterjee Sayan
Conventional Amplitude Distribution Using Particle Swarm
Optimization
Laskowski Piotr, Habrat Witold, Sieniawski Jan, Surface integrity of finished turned Ti- 6Al-4V alloy with high
Krupa Krzysztof
pressure coolant
Influence of Injection Moulding Parameters on Tensile Strength
Raos Pero, Stojsic Josip, Hloch Sergej
of Injection Moulded Part
IN
CZ
IN
PL
HR,
SK
SK,
PL,
CZ
SK,
CZ
SK,
CZ
SK,
CZ
SK,
CZ
Hloch Sergej, et al.
Potential hazards elimination during amunition processing
using abrasive waterjet
Cárach Ján, et al.
Incoloy turning by Abrasive Water Jet
Cárach Ján, et al.
Graphite turning by Abrasive Water Jet
Hutyrová Zuzana, et al.
Machining of wood composite material by water and abrasive
water jet
Lehocká Dominika, et al.
Disintegration of materials by ultrasonic pulsating water jet
Hloch Sergej, et al.
Study of accompanying physical features of abrasive water jet
SK
Zeleňák Michal, et al.
Determination of abrasive particle velocity in abrasive water jet
CZ
Hlaváček Petr, et al.
Rock turning by abrasive water jet
CZ
Hlaváček Petr, et al.
Abrasive water jet milling
CZ
Andrea Čižiková, Filip Murgaš
Production Facilities Structure Design by Modal Analyses
SK
Matej Šomšák, Andrea Čižiková
Simulation of Rounded Cutting Edge Effects
SK
Andrej Andrej, Peter Pastucha
Simulation of End Mill Stability for Deep Grooves Machining
SK
Slavomír Hric, Filip Murgaš
Some Cases of Product Quality Indicators Influence
SK
Filip Murgaš, Matej Šomšák, Slavomír Hric
Opportunities for Production Costs Improving of Motor-Bus
Skeleton
SK
Peter Pastucha, Andrej Andrej, Filip Murgaš
Machining Strategies Selection for Manufacturing Efficiency
SK
Anna Šmeringaiová
Implementation of CA - technology in Teaching. Preparing for
the Future
SK
Participants states:
Austria | Bulgaria | Croatia | Czech Republic | Germany | India | Italy | Poland | Serbia | Slovakia | Switzerland | Turkey
Final program of ICMEM 2014
Monday – Thursday | September 1st – September 5th, 2014 | List of posters
POSTER SESSION
Winczek Jerzy, Ziobrowski Paweł
The Modelling of the Temperature Field during Surfacing by
Submerged Arc Welding using a Bimodal Heat Source Model
PL
Dewangan Saurabh
Wear Analysis of Cemented Carbide Tools
IN
Krolczyk Jolanta
The Analysis of Homogeneity of Multicomponent Industrial
Fodder
PL
Krolczyk Grzegorz
Surface Morphology in Production Process
PL
Dimkow Svetoslav
Sayan Chatterjee, Dipak Rajan Poddar
Before Coffee Break 
Gokcen Alev Ciftcioglu
13:00 – 15:00
Poster
Moderators: Authors
|technical note|
The lectures presentation length is 15 minutes,
including Q&A session.
Remanufacturing of Contract Furniture as Modern Business
Strategy
Design Equation of Iris Excited First Iteration Fractal Slot
Antenna in Waveguide Broadwall
Comparing the Kinetic Model Predictions of Gelation Time with
Experimental Measurements for Multifuncional Monomers
BG
IN
TR
Knapčíková Lucia, Monka Peter, Hloch Sergej
Composite materials reinforced with fabric from used tyres
SK
Murčinkova Zuzana, Vasilko Karol
Textured Turning
SK
Kumar Ravi, Ghosh Aniruddha, Chattopadhyaya
Emerging friction stir welding for aluminum and its applications
Somnath
Simulation of accumulator influence on hydraulic shock in long
Bureček Adam, Hružík Lumír, Vašina Martin
pipe
Synthesis of Amplitude Taper Beam Steered Linear Array of
Chatterjee Soumyo, Chatterjee Sayan
Conventional Amplitude Distribution Using Particle Swarm
Optimization
Laskowski Piotr, Habrat Witold, Sieniawski Jan, Surface integrity of finished turned Ti- 6Al-4V alloy with high
Krupa Krzysztof
pressure coolant
Andrzej Perec, Frank Pude, Konrad Wegener
Introductory research into the cutting of Carbon Fiber
Franz Trieb
Composite using an 1000 MPa Pure Waterjet
Andrzej Perec, Michael Kaufeld, Frank Pude,
Taguchi Approach Optimization of Steel Surface Roughness in
Konrad Wegener
Abrasive Water Jet Cutting
Influence of Injection Moulding Parameters on Tensile Strength
Raos Pero, Stojsic Josip, Hloch Sergej
of Injection Moulded Part
IN
CZ
IN
PL
CH,
A
CH,
D
HR,
SK
SK,
PL,
CZ
SK,
CZ
SK,
CZ
SK,
CZ
SK,
CZ
Hloch Sergej, et al.
Potential hazards elimination during amunition processing
using abrasive waterjet
Cárach Ján, et al.
Incoloy turning by Abrasive Water Jet
Cárach Ján, et al.
Graphite turning by Abrasive Water Jet
Hutyrová Zuzana, et al.
Machining of wood composite material by water and abrasive
water jet
Lehocká Dominika, et al.
Disintegration of materials by ultrasonic pulsating water jet
Hloch Sergej, et al.
Study of accompanying physical features of abrasive water jet
SK
Zeleňák Michal, et al.
Determination of abrasive particle velocity in abrasive water jet
CZ
Hlaváček Petr, et al.
Rock turning by abrasive water jet
CZ
Hlaváček Petr, et al.
Abrasive water jet milling
CZ
Participants states:
Austria | Bulgaria | Croatia | Czech Republic | Germany | India | Italy | Poland | Serbia | Slovakia | Switzerland | Turkey
Download

2014_Technical Programme v_3-3.pdf