C OUR SE SYLLA BUS
YEDITEPE UNIVERSITY
2014/2015-1
FACULTY OF ENGINEERING AND ARCHITECTURE
Course Code-Name EE354 - COMMUNICATION SYSTEMS
Course Schedule
Wednesday: 9:00 am – 11:00 am B0313
Friday 11:00 am – 12:00 pm B0313
Instructor’s Name Asst. Prof. Dr. Engin Masazade
Phone [email protected]
E-mail
Office Hours
Office Hours
Monday
11:00 am – 12:00 pm
Tuesday
11:00 am – 12:00 pm
Wednesday
11:00 am – 12:00 pm
2 pm – 4 pm
Thursday
11:00 am – 12:00 pm
Friday
4 pm – 5 pm
Subscribe Course E-Mail Group:
YU_EE354_FALL2014
Assistants,
Gözde Yetik
[email protected]
Textbook &
Supplementary
Materials
Main Textbook: B.P. Lathi and Z. Ding, Modern Digital and Analog
Communication Systems, 4th edition, Oxford University Press.
Recommended book: B. Sklar, Digital Communications, 2nd edition, Prentice
Hall.
Recommended
Prerequisites
EE254 – Applied Probability
EE361 - Introduction to Digital Signal Processing
Course Outline
PART 1: Signals Review, Fourier Transform Review
PART 2: Analog Communication (Amplitude Modulation (AM), Angle
Modulation (PM/FM))
PART 3: Digital Communications:
Transmitter
Receiver
Sampling Theorem
Pulse Code Modulation
Nyquist first Criterion for Zero ISI,
Minimum Transmission Bandwidth
Matched Filter
Bit Error Rate
C OUR SE SYLLA BUS
YEDITEPE UNIVERSITY
2014/2015-1
FACULTY OF ENGINEERING AND ARCHITECTURE
Course Code-Name EE354 - COMMUNICATION SYSTEMS
PART4: Digital Communications for M-ary transmission symbols. Bandwidth,
BER, Power trade-offs.
Midterm Dates
Midterm: Week 9 (Saturday, Nov. 15th, 2014) – 2 hour (1 page, double side
cheat sheet is allowed.)
Grading
Percentage
Note
Laboratory
35 %
You can miss at
most 1 lab without
any excuse.
Midterm
30 %
Final
35 %
Allowed time: 120
minutes
Allowed time: 120
minutes
------------------------------------------------------7 LAB SESSIONS: 5 PTS, TOTAL = 35 PTS.
Prelab Matlab Assignment
1 PTS
Quiz (Closed notes): 3 short 2 PTS
questions. One question
from lectures, One
question from the lab.
manual, one question from
Matlab)
Laboratory Grading
FOR LAB. MANUALS
PLEASE VISIT
http://ee.yeditepe.edu.tr/
labs/ee354/
Lab Report
Performance
Attendance

1 PTS
1 PTS
80 % (If your lecture and lab attendance falls
below 80%, you FAIL the class (FA) and have NO
YEDITEPE UNIVERSITY
C OUR SE SYLLA BUS
2014/2015-1
FACULTY OF ENGINEERING AND ARCHITECTURE
Course Code-Name EE354 - COMMUNICATION SYSTEMS
right to take the Final make-up exam.)
Course Objectives
i. Adequate knowledge in mathematics, science and engineering subjects
pertaining to the relevant discipline; ability to use theoretical and applied
information in these areas to model and solve engineering problems.
ii. Ability to identify, formulate, and solve complex engineering problems;
ability to select and apply proper analysis and modeling methods for this
purpose.
iii. Ability to design a complex system, process, device or product under
realistic constraints and conditions, in such a way as to meet the desired
result; ability to apply modern design methods for this purpose. (Realistic
constraints and conditions may include factors such as economic and
environmental issues, sustainability, manufacturability, ethics, health, safety
issues, and social and political issues, according to the nature of the design.)
iv. Ability to devise, select, and use modern techniques and tools needed for
engineering practice; ability to employ information technologies effectively.
v. Ability to design and conduct experiments, gather data, analyze and
interpret results for investigating engineering problems.
ix. Awareness of professional and ethical responsibility.
Lab Schedule
Week 2
Week 3
Week 4
Week 5
Week 6, (5 pts)
Week 7, (5 pts)
Week 8, (5 pts)
Week 9
Week 10, (5 pts)
Week 11
Week 12, (5 pts)
Week 13
Week 14 (5 pts)
Week 15 (5 pts)
NO LAB
NO LAB
NO LAB
Orientation to Communication Systems Lab
AM Modulation and Envelope Recovery
SSB Generation-Synchronous Demodulation
Analysis of the FM Spectrum
NO LAB (Midterm Week)
Sampling and Time Division Multiplexing
(TDM)
BREAK - NO CLASSES/NO LAB
PCM Encoding & Decoding
NO LAB
BER Analysis
ASK/FSK/BPSK
YEDITEPE UNIVERSITY
C OUR SE SYLLA BUS
FACULTY OF ENGINEERING AND ARCHITECTURE
2014/2015-1
Course Code-Name EE354 - COMMUNICATION SYSTEMS
If you are not familiar with Matlab, please watch
MATLAB TUTORIALS
MATLAB Tutorial: Getting Started with MATLAB (8 Tutorials)
http://www.youtube.com/watch?v=tqjZ80PwqBU&feature=c4-overviewvl&list=PL7CAABC40B2825C8B.
Course Outcomes
(Note to instructor: Please list only those outcomes that your course serves)
i.
Adequate knowledge in mathematics, science and engineering subjects pertaining to the
relevant discipline; ability to use theoretical and applied information in these areas to
model and solve engineering problems.
(Matematik, fen bilimleri ve kendi dalları ile ilgili mühendislik konularında yeterli bilgi birikimi;
bu alanlardaki kuramsal ve uygulamalı bilgileri mühendislik problemlerini modelleme ve çözme
için uygulayabilme becerisi.)
ii.
Ability to identify, formulate, and solve complex engineering problems; ability to select and
apply proper analysis and modeling methods for this purpose.
(Karmaşık mühendislik problemlerini saptama, tanımlama, formüle etme ve çözme becerisi; bu
amaçla uygun analiz ve modelleme yöntemlerini seçme ve uygulama becerisi.)
iii.
Ability to design a complex system, process, device or product under realistic constraints
and conditions, in such a way as to meet the desired result; ability to apply modern design
methods for this purpose. (Realistic constraints and conditions may include factors such as
economic and environmental issues, sustainability, manufacturability, ethics, health, safety
issues, and social and political issues, according to the nature of the design.)
(Karmaşık bir sistemi, süreci, cihazı veya ürünü gerçekçi kısıtlar ve koşullar altında, belirli
gereksinimleri karşılayacak şekilde tasarlama becerisi; bu amaçla modern tasarım yöntemlerini
uygulama becerisi. (Gerçekçi kısıtlar ve koşullar tasarımın niteliğine göre, ekonomi, çevre
sorunları, sürdürülebilirlik, üretilebilirlik, etik, sağlık, güvenlik, sosyal ve politik sorunlar gibi
öğeleri içerirler).
iv.
Ability to devise, select, and use modern techniques and tools needed for engineering
practice; ability to employ information technologies effectively.
(Mühendislik uygulamaları için gerekli olan modern teknik ve araçları geliştirme, seçme ve
kullanma becerisi; bilişim teknolojilerini etkin bir şekilde kullanma becerisi.)
v.
Ability to design and conduct experiments, gather data, analyze and interpret results for
investigating engineering problems.
(Mühendislik problemlerinin incelenmesi için deney tasarlama, deney yapma, veri toplama,
sonuçları analiz etme ve yorumlama becerisi.)
vi.
Ability to work efficiently in intra-disciplinary and multi-disciplinary teams; ability to
work individually.
YEDITEPE UNIVERSITY
C OUR SE SYLLA BUS
FACULTY OF ENGINEERING AND ARCHITECTURE
2014/2015-1
Course Code-Name EE354 - COMMUNICATION SYSTEMS
vii.
viii.
ix.
x.
xi.
(Disiplin içi ve çok disiplinli takımlarda etkin biçimde çalışabilme becerisi; bireysel çalışma
becerisi.)
Ability to communicate effectively both orally and in writing; knowledge of a minimum of
one foreign language.
(Sözlü ve yazılı etkin iletişim kurma becerisi; en az bir yabancı dil bilgisi.)
Recognition of the need for lifelong learning; ability to access information, to follow
developments in science and technology, and to continue to educate him/herself.
(Yaşam boyu öğrenmenin gerekliliği bilinci; bilgiye erişebilme, bilim ve teknolojideki
gelişmeleri izleme ve kendini sürekli yenileme becerisi.)
Awareness of professional and ethical responsibility.
(Mesleki ve etik sorumluluk bilinci.)
Information about business life practices such as project management, risk management,
and change management; awareness of entrepreneurship, innovation, and sustainable
development.
(Proje yönetimi ile risk yönetimi ve değişiklik yönetimi gibi iş hayatındaki uygulamalar
hakkında bilgi; girişimcilik, yenilikçilik ve sürdürebilir kalkınma hakkında farkındalık.)
Knowledge about contemporary issues and the global and societal effects of engineering
practices on health, environment, and safety; awareness of the legal consequences of
engineering solutions.
(Mühendislik uygulamalarının evrensel ve toplumsal boyutlarda sağlık, çevre ve güvenlik
üzerindeki etkileri ile çağın sorunları hakkında bilgi; mühendislik çözümlerinin hukuksal
sonuçları konusunda farkındalık.)
Download

course syllabus