FINAL INVITATION
Czech Concrete Society
www.cbsbeton.eu
EMINEN
T K E YN
AKERS
OTE SPE
FROM A
B R OA D
International conference
21ST CONCRETE
DAYS 2014
together with
CONCRETE 2014
exhibition
Held under auspices of
Ing. Jan Mládek, Minister of Industry and Trade of the Czech Republic,
Bc. Lubomír Franc, Governor of the Hradec Králové county,
MUDR. Zdeněk Fink, Mayor of the city of Hradec Králové
Ing. Václav Matyáš, President of Association of Building Enterpreneurs
of the Czech Republic November 26 and 27, 2014
Hradec Králové, ALDIS Conference Centre
PROGRAMME AT A GLANCE
WEDNESDAY 26 NOVEMBER 2014
07:30 – 16:00
08:30 – 18:00
09:00 – 10:30
10:30 – 11:00
11:00 – 12:30
12:30 – 14:00
14:00 – 15:30
14:00 – 15:30
15:30 – 16:00
16:00 – 18:00
16:00 – 18:00
Registration
Exhibition BETON 2014
Session ST1A: 21th CCD Opening + Invited lecture + Buildings
Coffee Break
Session ST2A: Invited Lectures
Lunch break
Session ST3A: Bridges
Session ST3B: Modelling and Design
Coffee Break
Session ST4A: Tunnels and other structures
Session ST4B: Research and Technology 1
Ground Floor
Foyers
Hall A
Foyers
Hall A
Ground Floor
Hall A
Hall B
Foyers
Hall A
Hall B
20:00 – 24:00
Social Evening
Hall A
THURSDAY 27 NOVEMBER 2014
08:30 – 11:30
09:00 – 13:00
09:00 – 11:00
11:00 – 11:30
11:30 – 13:00
13:00 − 13:15
13:15 – 14:00
Registration
Exhibition BETON 2014
Session CT1A: Codes, standards, certifications
Coffee Break
Session CT2A: Research and Technology 2
21th CCD Closing
Lunch Break
Ground Floor
Foyers
Hall A
Foyers
Hall A
Hall A
Ground Floor
CONFERENCE PROGRAMME
WEDNESDAY 26 NOVEMBER 2014
07:30 – 16:00
Registration
09:00 – 10:30
OPENING CEREMONY HALL A
Openinng of the conference
doc. Ing Jiří Kolísko, Ph.D.
Speech of welcome on behalf of the town of Hradec Králové
A new CBS honorary member
SESSION ST1A: INVITED LECTURE + BUILDINGS HALL A
Fibres in concrete: beauty and difficulty
Ing. Radomír Pukl, CSc., Ing. Tereza Sajdlová (Czech Republic)
Laser center ELI, Dolní Břežany
Ing. Jiří Koukal, Ing. Ludmila Kostková, prof. Ing. Jan L. Vítek, CSc., FEng., Ing. Milada Mazurová
Science and technology center – Ostrava Vítkovice
Ing. Rostislav Mazáč, Ing. Hana Šeligová
Prestressed concrete structures of shopping center Bory Mall in Bratislava
Ing. Martin Kovář, Ing. Vojtěch Petřík, Ph.D., Ing. Petr Karásek, Ph.D., Ing. Milan Mužík,
Ing. Milan Nikš
10:30 – 11:00
Coffee break
11:00 – 12:30
SESSION ST2A: INVITED LECTURES HALL A
Nuttlar Bridge – The highest bridge in Nordrhein-Westfallen
Dr. Hans Grassl (Germany)
Old and recent concrete structures in Turin
arch. Beatrice Coda Negozio, prof. Francesco Biasioli (Italy)
Construction of the first footbridge made of UHPC in the Czech Republic.
Ing. Petr Koukolík, prof. Ing. Jan L. Vítek, CSc., FEng., Ing. Robert Brož, Ph.D., Ing. Robert Coufal, Ph.D.,
Ing. Milan Kalný, Ing. Jan Komanec, Ing. Václav Kvasnička
12:30 – 14:00
Lunch break
14:00 – 15:30
SESSION ST3A: BRIDGES HALL A
The design and construction of new bridge structure over Váh river in Trencin
doc. Ing. Lukáš Vráblík, Ph.D., Ing. Jiří Jachan, Ing. Martin Sedmík, Ing. David Malina, Ing. Miroslav Blažek,
Ing. Milan Šístek, Ing. Tatiana Meľová
Bridges 216 + 217 on freeway D1, section Jánovce-Jabloňov, Slovakia
Ing. Libor Hrdina, Ing. Richard Novák, Ing. Martin Formánek
Cable-stayed bridge Avenida Prudente de Morais, Natal, Brasil
Ing. Richard Novák, Ing. Petr Kocourek, Ph.D.
Bridge over Canal Laranjeiras, Laguna, Brasil
Ing. Richard Novák, prof. Ing. Jiří Stráský, DSc., Ing. Petr Kocourek, Ph.D.,
Ing. Leonard Šopík, Ph.D.
The construction of the bridge on Pilsen´s ring road SO201 Domažlická – Křimická
Ing. Libor Hanzal, Ing. Libor Hájek, Ing. Jiří Mikula, Ing. Martin Havlík, Ing. Daniel Šindler, Ph.D.
14:00 – 15:30
SESSION ST3B: MODELLING AND DESIGN HALL B
Experimental verification of precast dapped-end beams
Ing. Michal Hasa, doc. Ing. Miloš Zich, Ph.D.
Shear cracks in the thin-wall prestressed element – numerical and experimental analysis
Ing. Jan Hamouz, doc. Ing. Lukáš Vráblík, Ph.D.
Design issues of railway bridges substructure
Ing. Martin Vlasák
Shear at the interface between composite parts of concrete section
doc. Ing. Jaroslav Navrátil, CSc., Ing. Lukáš Zvolánek
Fracture-mechanical parameters for modeling of quasi-brittle materials and structures
Ing. Radomír Pukl, CSc., Ing. Tereza Sajdlová, prof. Ing. Drahomír Novák, DrSc.,
Ing. David Lehký, Ph.D.
15:30 – 16:00
Coffee break
16:00 – 18:00
SESSION ST4A: TUNELLS AND OTHER STRUCTURES HALL A
Sudoměřice tunnel – crossing the road I/3 with extremely low overburden
Ing. Libor Mařík, Ing. Martin Svoboda, Ing. Tomáš Just
Steel fibre reinforced concrete in tunnel structures
Dr. Ing. Petr Vítek, Ing. Zdenka Staňková
Concrete sound-damping barrier of new generation
Ing. Jan Tichý, CSc., doc.Ing. Jiří Kolísko, Ph.D., Ing. Vítězslav Vacek, CSc.,
Ing. Renata Cvancigerová
Surface finishing of diagramph walls by pre-cast thin-walled cladding pannels
Ing. Zdeněk Hlasivec
Structural design and experimental verification of precast columns
from high performance concrete
Ing. Ctislav Fiala, Ph.D., Ing. Jaroslav Hejl, Ing. Tereza Pavlů, Ing. Tomáš Vlach, Ing. Martin Volf,
prof. Ing. Petr Hájek, CSc., Ing. Vlastimil Bílek, Ph.D., Ing. Vladimíra Tomalová
Cement concrete roads on bridges
Ing. Bohuslav Slánský, Ph.D., Ing. Jiří Šrůtka
Reconstruction of the reinforced-concrete railway bridge in km 3,668 – Argentinská
of the track Bubeneč – Holešovice in Prague
Ing. Jan Sýkora, Ing. Michal Hacaperka, Ing. Jiří Lukeš, Ing. Stanislav Rosenthal
16:00 – 18:00
SESSION ST4B: RESEARCH AND TECHNOLOGY 1 HALL B
Statistical comparison of FRC beams bending tests
Bc. Adam Podstawka, doc. Ing. Marek Foglar, Ph.D., Ing. Martin Kovář
Effects of creep and shrinkage on an integrated arch bridge structure
Ing. Bohuslav Slánský, Ing. Radim Nečas, Ph.D., prof. Ing. Jiří Stráský, DSc.
Effect of lightweight concrete density on bond strength
Ing. Jaroslav Kadlec, Ing. František Girgle, Ph.D., prof. Ing. Ivailo Terzijski, CSc.,
Ing. Lukáš Zvolánek
Experimental research of shrinkage in thick concrete elements.
prof. Ing. Jan L. Vítek, CSc., FEng., Ing. David Čítek, Ing. Petr Tej, Ph.D.
A hand calculationof the shear lag contribution to deflection increase of box girder bridges
Ing. Lukáš Kadlec, Prof. Ing. Vladimír Křístek, DrSc., FEng.
Analysis of secondary effects and bond behavior due prestressing
Ing. Ján Laco, Ing. Peter Pažma
THURSDAY 27 NOVEMBER 2014
08:30 – 11:30
Registration
09:00 – 11:00
SESSION CT1A: CODES, STANDARDS, CERTIFICATIONS + MODELLING HALL A
Concrete standards in the year 2014
Ing. Michal Števula, Ph.D.
Public procurements – new EU regulations – the role of engineer
Ing. Zdeněk Jeřábek, CSc., MBA, prof. Ing. Břetislav Teplý, CSc., FEng.
Calculation of the minimum reinforcement for limitation of crack width according to change
of national annex for ČSN EN 1992-1-1
Ing. Jiří Šmejkal, CSc., prof. Ing. Jaroslav Procházka, CSc.
Design of flat slabs height
prof. Ing. Ľudovít Fillo, PhD., Ing. Jana Labudková
Punching resistance of flat slabs without shear reinforcement
Ing. Ján Hanzel, Ing. Lucia Majtánová, prof. Ing. Jaroslav Halvonik, PhD.
Stability failure and reliability of concrete columns
prof. Dipl.-Ing. Dr. Vladimír Benko, PhD., prof. Ing. Ľudovít Fillo, PhD., Ing. Peter Kendický,
Ing. Ľubomír Lašán
Modulus of elasticity of concrete – the possibility of establishing,
test and technological influences
Ing. Petr Huňka, Ph.D.
11:00 – 11:30
Coffee break
11:30 – 13:00
SESSION CT2A: RESEARCH + TECHNOLOGY 2 HALL A
Strength class of SFRC according to the proposal ČSN 73 2452 and Model Code 2010
Ing. Václav Ráček, doc. Ing. Jan Vodička, CSc., doc. Ing. Jiří Krátký, CSc.
Possibilities of using nanoparticles in concrete technology
prof. Ing. Rudolf Hela, CSc., Bc. Martin Labaj
Experimental research of dynamic properties of an articulated frame reinforced
with an elastically embedded diaphragm
prof. Ing. Jiří Witzany, DrSc, Dr.h.c, doc. Ing. Tomáš Čejka, Ph.D., Ing. Radek Zigler, Ph.D.,
Ing. Shota Urushadze, Ph.D., doc. Ing. Daniel Makovička, CSc.
Fire resistant construction for tunnel construction using lightweight aggregate concrete
Ing. Vladimír Junek, Ing. Tomáš Míčka, Ing. Martin Kroc, doc. Ing. Jiří Kolísko, Ph.D.,
Ing. Isabela Bradáčová
Field testing of concrete members subjected to contact and adjacent blast
Ing. Radek Hájek, doc. Ing. Marek Foglar, Ph.D., Ing. Martin Kovář, Ing. Jiří Pachmáň, Ph.D.
13:00 – 13:15
21th CZECH CONCRETE DAYS CLOSING HALL A
13:15 – 14:00
Lunch break
POSTER SESSION
P01
P02
P03
P04
P05
P06
P07
P08
Plate-element numerical model of a bridge across the Hošťovský creek
used for a time dependent analysis
Ing. Bohuslav Slánský, doc. Ing. Miloš Zich, Ph.D.
The effective cross-section thickness and its effect on shrinkage
Ing. Radovan Hofírek, doc. Ing. Miloš Zich, Ph.D.
Influence of ground clay brick on the properties of fresh and hardened SCLC
Dr. Sandra Juradin, Ph.D.
Influence of the amount of dispersed suspension of carbon nano-tubes on physico-mechanical
properties of cement mortar
Ing. Tomáš Jarolím, prof. Ing. Rudolf Hela, CSc., Bc. Martin Labaj
Advanced technologies applied to optimize the design of cooling towers
Ing. Aleš Pražák
Light-Weight concrete structural members with non-metal composite reinforcement
Ing. Dorde Čairović, prof. RNDr. Ing. Petr Štěpánek, CSc.
Fibre-concrete tubes in pure shear mode
Ing. Lukáš Kadlec, Ing. Václav Ráček, prof. Ing. Vladimír Křístek, DrSc., FEng.,
doc. Ing. Jan Vodička, CSc.
High-performance concrete for thin-walled members
Ing. Petr Bílý, prof. Ing. Alena Kohoutková, CSc., FEng., Ing. Josef Fládr
P09
Summary of the main changes in the design standard ČSN EN 1992-1-1 and in its national annex
prof. Ing. Jaroslav Procházka, CSc., Ing. Jiří Šmejkal, CSc.
P10
Application of probabilistic methods at the assessment of structural load bearing capacity
Ing. Jiří Doležel, Ph.D., Ing. Martina Šomodíková, Ing. David Lehký, Ph.D,
prof. Ing. Drahomír Novák, DrSc.
Testing of concrete and fibre reinforced concrete in uniaxial tension
Ing. Martin Tipka, doc. Ing. Jitka Vašková, CSc.
Chloride ions diffusion in ultra-high performance concrete
Ing. Daniel Dobiáš, Ph.D., Ing. Radka Pernicová, Ph.D.
P11
P12
P13
P14
P15
Optimalization of precast units with regards to material consumption
Ing. Jan Koláček, Ph.D., Ing. Radim Nečas, Ph.D., Ing. Josef Vašíček, Ing. Vladimír Dibelka, Ph.D.
Experimental verification of plan curved arch structures
Ing. Dominik Hochman, Ing. Jan Trenz, Ing. Radim Nečas, Ph.D., prof. Ing. Jiří Stráský, DSc.
Options for improving the workability of high performance concrete
Ing. Michal Ženíšek, Ing. Tomáš Vlach
P16
Assessment of the axial and shear forces in the wall panels of residential buildings
according to en 1992-1-1
Ing. Abrahoim Iyad, PhD.
P17
Calculation of bearing capacity and pliability vertical joints of panel houses according to en1992-1-1
Ing. Abrahoim Iyad, PhD.
Mechanical properties of cement composites with alternative binders
Ing. Karel Šeps, Ing. Iva Broukalová, Ph.D.
Production and properties of functionally graded UHPFRC beams
Ing. Milan Rydval, Ing. Petr Huňka, Ph.D.
P18
P19
P20
Knowledge and experience of implementation of reconstruction of water supply facilities
Ing. Hana Nohelová
P21
Punching analysis of a flat slab with a change in elevation
Ing. Jan Nováček, doc. Ing. Miloš Zich, Ph.D.
P22
Influence of recycled aggregate quality on recycled concrete
Ing. Magdaléna Šefflová, Ing. Tereza Pavlů
P23
Enviromental assessment of recycled aggregate
Ing. Tereza Pavlů, Ing. Magdaléna Šefflová
The influence of cohesion of textile reinforcement with high performance concrete (HPC)
on four-point bending test using numerical simulations
Ing. Tomáš Vlach, Eng. Alexandru Chira, Ph.D., Ing. Lenka Laiblová, Ing. Ctislav Fiala, Ph.D.,
Ing. Magdaléna Novotná, Prof. Ing. Petr Hájek, CSc.
P24
P25
Optimization of pretensioned steel fiber reinforced concrete beam
Ing. Josef Novák, prof. Ing. Alena Kohoutková, CSc., FEng.
P26
Comparison of crack width calculations according to different approaches
Ing. Marek Vinkler, prof. Ing. Jaroslav Procházka, CSc.
Impact testing of concrete using a drop-weight impact machine
Ing. Stanislav Řeháček, Ing. Petr Huňka, Ph.D., Ing. David Čítek, Doc. Ing. Jiří Kolísko, Ph.D.
The influence of age and temperature on the bond behaviour between prestressing strands and UHPC
Ing. David Čítek, Ing. Tomáš Mandlík, Doc. Ing. Jiří Kolísko, Ph.D., Prof. Ing. Jan L. Vítek, CSc., FEng.,
Ing. Stanislav Řeháček
Testing the long-term flexural behaviour of FRC with synthetic fibres
Ing. Josef Fládr
Measurement of set fibre-concrete homogeneity in finished steel fibre-concrete structure
of segmental tunnel lining
prof. Ing. Leonard Hobst, CSc., doc. Ing. Jan Vodička, CSc., Ing.et Ing. Petr Bílek, prof. Ing. Jiří Vala, CSc.
Study of degradation of Ultra High Performance Concrete reinforcement
with different types of textiles
Ing. Michaela Kostelecká
Experimental analysis of the proposed high-strength concrete
Ing. Vladimír Suchánek, Bc. Michal Radouš
Edit the properties of the fresh concrete admixing additives and steel fibres
Ing. Vladimír Suchánek, Bc. Matěj Slováček
P27
P28
P29
P30
P31
P32
P33
P34
A choice of a convenient curing agent for concrete surface
Ing. Vladislav Trefil
P35
Study of the properties of concrete designed to watertight concrete tunnel lining
Ing. Adam Hubáček, Ph.D.
P36
Modelling of bridge approaching zone
Ing. Viktor Borzovič, PhD., Ing. Kamil Laco
P37
Analytical description punching–shear resistence of elements subjected to close blast
Ing. Martin Kovář, doc. Ing. Marek Foglar, Ph.D.
P38
Punching-shear resistance of elements subjected to close blast: analytical description
Bc. Jiří Stöhr, doc. Ing. Marek Foglar, Ph.D.
P39
Precast floor plates from lightweight concrete
Ing. Michala Hubertová, Ph.D., MBA, Ing. Pavel Hladík
P40
Experimental analysis of reinforcement corrosion on bond behaviour
prof. Ing. Juraj Bilčík, PhD., Ing. Ivan Holly, PhD.
Possible synergism of classical fly ash and fluidized bed fly ash in cement composites
Ing. Denisa Orsáková, prof. Ing. Rudolf Hela, CSc.
P41
P42
P43
Measuring the deflection of reinforced concrete slab
Ing. Branislav Páleník, Ing. Anna Stará, Doc. Ing. Miloš Zich, Ph.D.
Loading tests of experimental models for simulation of structure behaviour during floods
doc. Ing. Lukáš Vráblík, Ph.D., Ing. Jakub Růžička, doc. Ing. Petr Bouška, CSc., Ing. Petr Tej, Ph.D.
AIM AND OBJECTIVES OF THE 21ST CONCRETE DAYS
The concept of the 21st Concrete Days (CD 2014) allows in the usual 1.5 day not only for a rich programme of expert lectures
and posters, but also enough time for professional discussions, informal business negotiations and friendly meetings.
CBS offers to include English versions of the articles from the BD 2014 Anthology (as per author’s requirement) into the
prestigious scientific magazine listed in the Thompson Reuters database (SCOPUS). However, the Concrete days will be first
of all a traditional annual profile and balancing conference event, which aims to familiarize its participants with the most
significant concrete structures in the CR and abroad of the past year and with the most important technological innovations
in the field of concrete structures. The Czech Concrete Society CSSI as the organizing body of the konference will do their best
to ensure a convenient stay for the expected 350 participants.
SECTIONS OF THE CONFERENCE
■
■
■
■
■
■
■
■
Invited lectures
Research and technology
Modelling and design
Buildings
Bridges
Tunnels
Reconstructions
Codes, standards, certifications
SCIENTIFIC COMMITTEE
Assoc. Prof. . Ing. Jiří Kolísko, Ph.D., Chairman
Prof. Ing. Petr Hájek, CSc.
Ing. Michala Hubertová Ph.D., MBA
Ing. Milan Kalný
Prof. Ing. Alena Kohoutková, CSc., FEng.
Ing. Pavel Šourek
Ing. Vlastimil Šrůma, CSc., MBA
Ing. Michal Števula, Ph.D.
Prof. Ing. Jan L. Vítek, CSc., FEng.
DATES AND PLACE
The 21st Concrete Days will take place in the ALDIS Congress Centre (KC Aldis) in Hradec Králové, Eliščino nábřeží 375.
The professional program of the conference will be held on Wednesday, November 26 and Thursday, November 27, 2014;
the lectures will run parallelly in the Small Hall (Hall A) and in Eliška Hall (Hall B).
The Concrete 2014 exibition will take place also in the ALDIS centre.
The traditional social evening will take place on Wednesday, November 26, 2014 at the ALDIS Conference Centre.
ORGANIZATION INFORMATION
ORGANIZING BODY
Česká betonářská společnost ČSSI (ČBS)
PARTICIPATION FEE PAYMENT
The participation fee and other ordered services shall be paid before the conference starts. The payment will be accepted
only via bank transfer onto the organizer’s account, based on an invoice/tax document having been sent. Payees entered
before November 9, 2014 who will not keep the invoice due date (the day of crediting the receiver’s account is decisive) will
be asked to pay the difference between the early bird and late entry. The invoice will be sent immediately after receiving the
entry form. Those participants whose payments will not be received before November 21, 2014, will not be enabled to attend
the conference. Cash payments at registration will be accepted only for an extra fee.
FEE
Decisive for the fee amount are the paid CBS membership for 2014 as per October 1, 2014 and the date of sending the entry
form to the conference applies for students and grad students in daily studies before reaching the age of 26 (i tis necessary
to attach a legible copy of a valid student’s record book with a picture and name!) The fee includes participation in the conference events, 1 anthology with articles to lectures and posters, technical and information articles and meals (2 lunches
and coffee breaks during both days of the conference programme). Participation in the social evening (900 CZK) and extra
proceedings (450 CZK), are not included in the basic fee, i.e. everybody with no exemptions shall order and pay extra. In the
event of non-participating, the fee will not be returned and the anthology and CD will be sent by post.
All participants excluding the Scientific Committee, CBS honorary guests and CBS honorary members are subject to paying
the fee. Authors of the main papers are subject to reduced fee based on their CBS membership. Fee for Accompanying persons
includes the Opening Ceremony and invited lectures, morning coffee break and lunch on Wednesday, November 26, 2014.
Date of entry
Until November 9, 2014 After November 9, 2014
Fee
reduced
basic
CBS Member
4380 CZK
4780 CZK
CBS Non-member
5280 CZK
5780 CZK
Student/grad student
1680 CZK
1980 CZK
Accompanying person
680 CZK
680 CZK
VAT to be added as per valid regulations.
On site
extra
5800 CZK
6800 CZK
2800 CZK
1000 CZK
ENTRIES
The on-line entry form to participate in the 21st Concrete Days 2014 is available on www.cbsbeton.eu.
CONTACTS
Czech Concrete Society
Samcova 1, 110 00 Praha 1
+420 605 325 366, +420 775 124 100
☺
[email protected]
www.cbsbeton.eu
URL
PENZION
NAD OBOROU
Ak . Be dr
ého
Komensk
be
á
okruh
vic
lšo
La
Ma
HOTEL
TEREZIÁNSKÝ
DVŮR
ká
leck
Stře
Náhon
lic
e
á
Or
tří
da
ova
Hradecká
rk
Veve
KNIHOVNICKO-INFORMAČNÍ
CENTRUM
Brněn
ská
Go
HOTELOVÝ DŮM
ACADEMIA
e
La
b
sk á
Sokolská
ěn
ov
a
Brn
šín
N
Víta
Gočárův
V Lip
V Lip
lého
ejed
o
Víta Nejedléh
PENZION
NOVÉ
ADALBERTINUM
PENZION
U ČESKÉ
KORUNY
kách
Ra
ck
Bu
zu
Nerudova
kách
lu
Šimkova
Re
ssl
ov
a
cká
Střele
Nerudova
Habrmanova
PENZION
UNO
á tř.
á tř.
a
ov
íšil
sp
Po
í
sk
Praž
sk
Praž
a IV.
žn
ru
PENZION
ČERNÝ KŮŇ
tř. Ka
rl
a
ov
íšil
sp
Po
Ok
Gočárov
a tř.
Pilňáč
kova
UBYTOVNA
MĚSTSKÉ
PENZION
LÁZNĚ
U SVATÉHO
BOROMEUM LUKÁŠE
HOTEL
REZIDENCE ády
m
U KRÁLOVNY
Čs. ar
ELIŠKY
Gočárov
HOTEL
a tř.
GRAND
ká tř.
Dukels
anna
sk á
hov
PENZION
MIKAS
Riegrovo
náměstí
S.K.Neum
gové
c
Pou
ouhlíku
Na Okr
Haškova
Hlavní
nádraží
M.D.Retti
ny
KONGRESOVÉ
CENTRUM
ALDIS
A. D
vořá
ka
čár
ův
ru
ok
h
HOTEL
GARNI
Download

21ST CONCRETE DAYS 2014 - Česká betonářská společnost ČSSI