18
ICPE 2013
Programme
THURSDAY
PLENARY SESSION
1030 – 1200
HOLIDAY CLUB
1.
Vladimir Milačić
FACTORIES FOR THE FUTURE – A MENTAL LABYRINTH OF COGNITIVE REVOLUTION
2.
Nikolaje Caran, Milenko Lukin
THE EFFECTS OF ENLARGEMENT OF THE EUROPEAN UNION ON ROMANIA
3.
Zoran Petrović, Miomir Vukićević
THE INDUSTRY OF KRALJEVO AND THE SURROUNDINGS – ITS PAST AND FUTURE
SESSION 01
1300 – 1530
HOLIDAY CLUB
Chairmen: Zoran Miljković, Đorđe Čiča
CAx technologies (CAD/CAM/CAPP/CAE systems) and CIM systems
1.
Aleksandar Košarac, Milan Zeljković, Aleksandar Živković, Cvijetin
Mlađenović
MODAL ANALYSIS OF MACHINE TOOL SPINDLE ASSEMBLY
2.
Nenad Petrović, Mirko Blagojević, Zorica Đorđevic, Vesna Marjanović
PARAMETRIC DRAWING OF A CYCLO DRIVE RELATIVE TO INPUT SHAFT ANGLE
3.
Nenad Marjanović, Nenad Kostić, Nenad Petrović, Miloš Matejić, Mirko
Blagojević
PARAMETRIC MODELING OF GEARD POWER TRANSMISSIONS IN CAD SOFTWARE WITH DEFINABLE SHAFT AXIS POSITIONS
4.
Vesna Mandić, Milentije Stefanović, Žarko Gavrilović
DEVELOPMENT OF THE FORGING TECHNOLOGY FOR PRODUCING THE ARTIFICIAL HIP STEM THROUGH APPLICATION OF VIRTUAL MANUFACTURING
5.
Aleksandra Petrović, Ljubomir Lukić, Mišo Bjelić, Marina Pljakić
OPTIMAL TOOL PATH MODELING IN CONTOUR MILLING PROCESS
6.
Zvonko Petrović, Ljubomir Lukić, Mirko Đapić, Aleksandra Petrović
DEVELOPMENT OF THE PROGRAM TO PREPARE TOOL SETS IN FLEXIBILE
MANUFACTURING SYSTEM
25 – 28 September 2013
Kraljevo - Kopaonik
Programme
ICPE 2013
19
IT and artificial intelligence in manufacturing engineering
7.
8.
9.
Vladimir Pucovsky, Marin Gostimirović, Pavel Kovač, Dragan Rodić,
Milenko Sekulić
EXPERIMENTAL DETERMINATION OF ABRASIVE WATER JET CURVATURE
AND ITS MODELING USING THE GENETIC PROGRAMMING
Najdan Vuković, Zoran Miljković, Marko Mitić, Milica Petrović, Mohamed
A. Husen
NEURAL EXTENDED KALMAN FILTER FOR STATE ESTIMATION OF AUTOMATED GUIDED VEHICLE IN MANUFACTURING ENVIRONMENT
Marko Mitić, Zoran Miljković, Najdan Vuković, Bojan Babić, Ali Diryag
PREDICTION OF ROBOT EXECUTION FAILURES USING NEURAL NETWORKS
1300 – 1530
SESSION 02
PRESIDENT HALL
Chairmen: Bojan Babić, Mirna Nožić
Forming and shaping technologies
1.
Saša Ranđelović, Saša Nikolić, Mladomir Milutinović
ANALYSIS OF INJECTION MOLDING IN THE DIE CAVITY WITH METAL INSERTS
2.
Srbislav Aleksandrović, Milentije Stefanović, Vukić Lazić, Milan Đorđevic,
Dragan Milosavljević, Dragan Adamović
ECOLOGICAL LUBRICANTS USE IN HIGHER PRESSURE METAL FORMING PROCESSES
3.
Dragan Adamović, Vesna Mandić, Miroslav Živković, Milentije Stefanović,
Marko Topalović, Srbislav Aleksandrović
NUMERICAL MODELING OF IRONING PROCESS
4.
Dejan Movrin, Miroslav Plančak, Igor Kačmarčik, Dragiša Vilotić, Aljoša
Ivanišević, Mladomir Milutinović, Plavka Skakun
INVESTIGATION OF COLD COMBINED EXTRUSION OF STEEL BILLETS
5.
Božica Bojović, Bojan Babić
RELEVANT SURFACE TEXTURE PARAMETERS FOR DEEP DRAWING MADE
METAL BEVERAGES
6.
Muamar Benisa, Bojan Babić, Aleksandar Grbović
FEM SIMULATION TO OPTIMIZE TOOL GEOMETRY FOR SUPPORTING RIBS
OF AN AIRCRAFT TAIL USING THE RUBBER PAD FORMING
7.
Mirna Nožić, Himzo Đukić
MODELS FOR CALCULATION OF DEFORMATION FORCE FOR MULTI STAGE
DRAWING
Kraljevo - Kopaonik
25 – 28 September 2013
20
ICPE 2013
Programme
Joining and casting technologies
8.
Mišo Bjelić, Miomir Vukićević, Marina Pljakić
SIMULATION OF WIRE MELTING RATE DURING GMA WELDING
9.
Dušan Jovanić, Miloš Jovanović
VIRTUAL WELDING ON SIMULATOR CS WAVE
SESSION 03
1800 – 2100
HOLIDAY CLUB
Chairmen: Vid Jovišević, Ljubomir Lukić
CAx technologies (CAD/CAM/CAPP/CAE systems) and CIM systems
1.
Stevo Borojević, Vid Jovišević, Velimir Todić, Miodrag Milošević, Dejan
Lukić
SEGMENT OF CAPP - AUTOMATED MODULAR FIXTURE DESIGN IN CAD ENVIROMENT
2.
Marko Veselinović, Nikola Vitković, Miroslav Trajanović, Dalibor Stevanović, Miodrag Manić, Stojanka Arsić, Slađana Petrović
DIFFERENT APPROACHES FOR CREATION OF HUMAN TIBIA 3D MODELS
BASED ON CT DATA
3.
Đorđe Čiča, Simo Jokanović, Slaviša Todorović, Stevo Borojević
TOLERNACE TRANSFER FROM CAD TO CAM SYSTEMS
4.
Suzana Petrović Savić, Dragan Adamović, Goran Devedžić, Branko Ristić,
Aleksandar Matić
INFLUENCE OF THE MATERIAL TYPE, FLEXION DEGREE AND AXIAL COMPRESSIVE LOADS ON CONTACT STRESS GENERATION ON THE TIBIAL INSERT
OF THE TOTAL KNEE ENDOPROSTHESIS
5.
Dejan Lukić, Velimir Todić, Mijodrag Milošević, Goran Jovičić, Jovan Vukman
MULTI-CRITERIA EVALUATION AND SELECTION OPTIMAL MANUFACTURING
PROCESSES OF THE BODY ENDOPROSTHESIS HIP JOINT
6.
Jovan Vukman, Dejan Lukić, Velimir Todić, Mijodrag Milošević, Goran Jovičić
ANALYSIS OF DEVELOPED SOFTWARE SYSTEMS FOR STEP COMPLIANT MANUFACTURING
7.
Bogdan Sovilj, Goran Gerik, Ivan Sovilj-Nikić
DESIGNING AND MODELING PROGRAM SYSTEM TAPS USING PRO/ ENGINEER WILDFIRE 5.0
25 – 28 September 2013
Kraljevo - Kopaonik
Programme
ICPE 2013
21
8.
Miloš Ristić
AUTOMATION OF DESIGN USING RULE-BASED KNOWLEDGE ENGINEERING
9.
Goran Mladenović, Ljubodrag Tanović, Radovan Puzović, Mihajlo Popović
ANALYSIS OF MACHINING STRATEGIES USING COMMERCIAL CAD/CAM
SOFTWARE
1800 – 2100
SESSION 04
PRESIDENT HALL
Chairmen: Miroslav Trajanović, Snežana Ćirić Kostić
Product development – product design
1.
Miloš Matejić, Ljiljana Veljović, Mirko Blagojević, Nenad Marjanović
DYNAMIC BEHAVIOUR OF C CONCEPT PLANETARY REDUCER
2.
Lozica Ivanović, Miloš Matejić
ADOPTION OF OPTIMAL TOOTHING PARAMETERS OF GERORTOR PUMP
3.
Ljubomir Lukić, Aleksandra Petrović, Dušica Lukić
DESIGN OF A DELTA WOUND CORE TRANSFORMER WITH NOISE REDUCTION
4.
Mihajlo Popović, Goran Mladenovic, Ljubodrag Tanović
GEOMETRY ANALYSIS OF STRAIGHT FLUTED TAPS
5.
Dalibor Stevanović
EXPERIMENTAL DETERMINATION OF BONE MATERIAL PROPERTIES FOR USE
IN FEA
Rapid prototyping and reverse engineering
6.
Giangiacomo Minak, Stefan Pantović, Nebojša Bogojević, Snežana Ćirić
Kostić
INFLUENCE OF A BUILDING PARAMETERS ON THE ACCURACY OF THE SHAPE
AND DIMENSION OF PARTS PRODUCED BY SLS
7.
Miroslav Trajanović, Milica Tufegdžić, Stojanka Arsić, Dragana Ilić
TOWARD REVERSE ENGINEERING OF HIP BONE
Machining technologies
8.
Nedeljko Dučić, Nenad Pavlović, Radomir Slavković
DEVELOPMENT OF A MODEL OF THE CHIP TEMPERATURE IN THE CUTTING
PROCESS OF WEAR RESISTANT PARTS
Kraljevo - Kopaonik
25 – 28 September 2013
22
ICPE 2013
9.
Programme
Aleksandar Košarac, Milan Zeljković, Aleksandar Živković, Cvijetin
Mlađenović
EXPERIMENTAL INVESTIGATION OF CHATTER VIBRATIONS IN TURNING PROCESSES BY USING ADVANCED LABORATORY EQUIPEMENT
10. Slobodan Ivanović, Ljubomir Lukić, Zoran Petrović, Goran Miodragović
SOFTWARE STRUCTURE OF THE POSTPROCESSOR GENERATOR OF NC PROGRAMS IN FLEXIBLE MANUFACTURING SYSTEM
Processing of nonmetal materials (plastic, wood, ceramics, ...)
11. Slobodanka Galović, Slobodan Todosijević, Jelena Tomić, Zlatan Šoškić
APPLICATION OF PHOTOACOUSTIC TECHNIQUES FOR CHARACTERIZATION
OF MATERIALS
FRIDAY
900 – 1100
SESSION 05
HOLIDAY CLUB
Chairmen: Margarita Georgieva, Zoran Petrović
Surface engineering and nanotechnologies
1.
Sava Sekulić, Nemanja Tasić, Branislav Bogojević
COMBINED GRAPHICS WHICH CONNECT BASIC ROUGHNESS PARAMETERS
OF MACHINED SURFACE BY SURFACE GRINDING OF STEELS
2.
Bogdan Nedić, Desimir Jovanović, Miodrag Čupović
CHARACTERISTICS OF CHROMIUM COATINGS DEPOSITED IN PROGRAMMED
CURRENT REGIME
3.
Dušan Petković, Fatima Živić, Goran Radenković, Miroslav Trajanović, Miodrag Manić
COATING: A WAY TO IMPROVE BIOMEDICAL PROPERTIES OF 316 LVM
STAINLESS STEEL
Revitalisation, reengineering and maintenance of manufacturing systems
4.
Dobrinka Atmadzhova, Nebojša Bogojević, Branko Radičević
RCM ANALYSIS OF THE RAILWAY BOGIE
5.
Margarita Georgieva, Nelly Stoytcheva
MODELLING AND QUANTITATIVE ANALYSIS OF RAMS INDEXES – COMPARATIVE ANALYSIS OF METHODS
25 – 28 September 2013
Kraljevo - Kopaonik
Programme
6.
ICPE 2013
23
Nelly Stoytcheva
SAFETY REPORTS OF INVESTEMENT RAILWAY PROJECTS - REQUIREMENTS
AND PRACTICE
Tribology
7.
Milentije Stefanović, Srbislav Aleksandrović, Dragan Adamović, Milan
Đorđević
MODERN METHODS OF TRIBO-MODELING IN DEEP DRAWING OF THIN
SHEETS
900 – 1100
SESSION 06
PRESIDENT HALL
Chairmen: Dragoljub Lazarević, Milan Kolarević
Manufacturing engineering – new technologies and globalisation of engineering
1.
Vladimir Kvrgić, Zoran Dimić, Vojkan Cvijanović, Zoran Višnjić
A CONTROL ALGORITHM FOR IMPROVING THE PRECISION OF FIVE-AXIS MACHINE TOOLS
2.
Milan Kolarević, Vladan Grković, Branko Radičević, Zvonko Petrović
PROPOSED MODEL FOR OPTIMIZATION PHASE PROCESS METHOD LINEAR
PROGRAMMING
3.
Vladan Grković, Zvonko Petrovć, Milan Kolaravić, Branko Radičević
APPLICATION OF THREE-COMPONENT SYSTEM FOR THE FORMATION OF
CONTOUR AND SURFACE TERNARY GRAPH
4.
Dragan Temeljkovski, Stojanče Nusev, Dragana Temeljkovski
EVALUATION OF QUALITY AND EFFICIENCY OF TECHNOLOGIES FOR MAKING
AXI-SYMMETRICAL PROFILES – METHOD OF SUPERIORITY AND INFERIORITY
Production system management
5.
Željko Pavićević
NEW MODELS OF RISK MANAGEMENT; MANAGEMENT IN TIMES OF CRISIS
6.
Dragoljub Lazarević, Anđela Lazarević
PRODUCTION MANAGEMENT SYSTEM IN THE CASE OF PLASMA CUTTING
PROCESS
PLENARY SESSION
1.
1100 – 1200
HOLIDAY CLUB
Miroslav Trajanović
CAN WE REPLICATE NATURE?
Kraljevo - Kopaonik
25 – 28 September 2013
24
ICPE 2013
2.
Programme
Ivan Matin
A REVIEW OF RESEARCH, ISSUES AND APPROACHES FOR MOLD DESIGN SOFTWARE DEVELOPMENT
1230 – 1415
SESSION 07
HOLIDAY CLUB
Chairmen: Miroslav Radovanović, Vladislav Blagojević
Automatisation, robotisation and mechatronics
1.
Darko Skupnjak, Marina Mijanović Markuš, Zoran Mijanović, Radomir
Vukasojević
DESIGNING OF MOBILE PLATFORM FOR THE TERRAIN ROBOT „ROBECO“
2.
Vesna Brašić, Vladimir Đorđević
THE METHODS FOR SYNTHESIS AND ANALYSIS CONTROLLED TIME DELAY
SYSTEM WITH REQUIRED DAMPING FACTOR
3.
Dragan Pršić, Ljubiša Dubonjić, Vladimir Đorđević
DETERMINATION OF THE DESCRIBING FUNCTION OF NOZZLE-FLAPPER TYPE
PNEUMATIC SERVO VALVE
4.
Vladislav Blagojević, Miroslav Radovanović, Predrag Janković
POSITION CONTROL OF X-Y TABLE FOR CNC MACHINE BY DIGITAL SLIDING
MODE
5.
Nataša Kablar, Vladimir Kvrgić
MATHEMATICAL MODEL OF STEWART PLATFORM
6.
Nataša Kablar
OVERVIEW OF WIRELESS CONTROL OF MOBILE ROBOTS
SESSION 08
1230 – 1415
PRESIDENT HALL
Chairmen: Vidosav Majstorović, Miomir Vukićević
Nonconventional technologies (Advanced machninig technologies)
1.
Miloš Madić, Velibor Marinković, Miroslav Radovanović
PARETO BASED OPTIMIZATION OF LASER CUT QUALITY CHARACTERISTICS
2.
Predrag Janković, Miroslav Radovanović, Vladislav Blagojević
PROCESS PARAMETERS EFFECT ON CHARACTERISTICS OF KERF GEOMETRY
BY ABRASIVE WATER JET CUTTING
25 – 28 September 2013
Kraljevo - Kopaonik
Programme
ICPE 2013
25
3.
Miroslav Radovanović, Gheorghe Brabie, Eugen Herghelegiu, Iliya Zhelezarov
INVESTIGATION ON SURFACE ROUGHNESS OF CARBON STEEL MACHINED
BY ABRASIVE WATER JET
4.
Jelena Baralić, Bogdan Nedić, Predrag Janković
EFFECT OF TRAVERSE SPEED AND OPERATING PRESSURE ON SURFACE
ROUGHNESS IN ABRASIVE WATER JET MACHINING
Metrology, quality systems and quality management
5.
Mirko Đapić, Ljubomir Lukić
UNCERTAINTY MODELING IN THE TECHNICAL PRODUCT RISK ASSESSMENT
6.
Ezequiel Poodts, Aleksandar Vranić, Snežana Ćirić Kostić, Zlatan Šoškić
METHOD FOR CONTROL 3D SCANNED TURBINE BLADE IN ACCORDANCE
WITH THE ALIGNMENT OF COORDINATE PLANES
7.
Jelena Mačužić, Nemanja Majstorović, Branislav Glišić, Vidosav
Majstorović
APPLICATION AND ACCURACY OF 3D-MODELLING IN THE FIELD OF ORTHODONTIC
1430 – 1630
SESSION 09
HOLIDAY CLUB
Chairmen: Petar Petrović, Nataša Kablar
Automatisation, robotisation and mechatronics
1.
Zoran Dimić, Dragan Milutinović, Vladimir Kvrgić, Zoran Višnjić, Sanja
Trgovčević
CONTROL AND PROGRAMMING SYSTEM OF PARALLEL KINEMATIC MACHINE TOOLS
2.
Živana Jakovljević, Radovan Puzović
DETECTION OF PLANAR SEGMENTS IN POINT CLOUD USING WAVELET
TRANSFORM
3.
Nikola Lukić, Petar Petrović, Ivan Danilov
VARIABLE STIFFNESS ACTUATOR DESIGN FOR INTRINSICALLY COMPLIANT
AND BACKDRIVABLE INDUSTRIAL HUMANOID ROBOT
4.
Ivan Danilov, Petar Petrović, Nikola Lukić
CODED STRUCTURED LIGHT TRIANGULATION FOR AGILE ROBOT – ENVIRONMENT INTERACTION IN ARC WELDING
Kraljevo - Kopaonik
25 – 28 September 2013
26
ICPE 2013
Programme
5.
Isak Karabegović, Edina Karabegović, Mehmed Mahmić, Ermin Husak
THE ROLE OF INDUSTRIAL ROBOTICS IN DEVELOPMENT OF AUTOMOBILE
INDUSTRY
6.
Aco Antić
DEVELOPMENT OF TOOL WEAR MONITORING SYSTEM FOR TURNING
1430 – 1630
SESSION 10
PRESIDENT HALL
Chairmen: Zlatan Šoškić, Nataša Pavlović
Education in the field of manufacturing engineering
1.
Nataša Pavlović
SWOT ANALYSIS AS A TOOL FOR ТЕАCHING ENGLISH
2.
Jelena Manojlović, Predrag Janković
MEASUREMENT OF NON-ELECTRICAL QUANTITIES BY ELECTRICAL MEANS
IN STUDENT’S EDUCATION
3.
Vidosav Majstorović
EDUCATION OF PRODUCTION ENGINEERS FOR DIGITAL MANUFACTURING
4.
Saša Ćuković, Frieder Pankratz, Goran Devedžić, Gudrun Klinker, Vanja Luković, Lozica Ivanović
AN INTERACTIVE AUGMENTED REALITY PLATFORM FOR CAD EDUCATION
Eco technologies and ecological systems
5.
Nicolae Herisanu, Branko Radičević, Zoran Petrović, Vladan Grković
SOUND INSULATION OF A PLYWOOD TRANSPORTER
6.
Marina Pljakić, Jelena Tomić, Mišo Bjelić
NOISE PROTECTION IN MANUFACTURING PLANTS
7.
Ivaylo Topalov, Branko Radičević, Bojan Tatić, Zlatan Šoškić
NOISE MAPPING IN AREA OF AN URBAN OVERPASS
1700 – 1900
ROUND TABLE
HOLIDAY CLUB
Is There a Future for Industry in Serbia?
1.
Vidosav Majstorović
MANUFACTURING INNOVATION AND HORIZON 2020 – DEVELOP AND IMPLEMENT ‘NEW MANUFACTURING’ WHAT ARE IMPORTANT FOR SERBIA?
2.
Petar Petrović
“INDUSTRIALIZATION IN SERBIA” - FACTORIES OF THE FUTURE AND FACTORIES WITH A FUTURE
25 – 28 September 2013
Kraljevo - Kopaonik
Download

THURSDAY