6th International Conference
Mechatronic Systems and Materials
5 – 8 July 2010, Opole, POLAND
OPOLE UNIVERSITY OF TECHNOLOGY
Faculty of Mechanical Engineering
Department of Mechanics and Machine Design
and Polish Society of Theoretical and Applied Mechanics, Opole Branch
6TH INTERNATIONAL CONFERENCE
MECHATRONIC SYSTEMS AND MATERIALS
5 – 8 JULY 2010, OPOLE, POLAND
In October 2005, the 1st International Conference Mechatronic Systems and Materials was held in
Vilnius, Lithuania. The Conference was organized by Vilnius Gediminas Technical University,
Kaunas University of Technology, Lithuanian Academy of Sciences, UNESCO International Centre
for Engineering Education and IFToMM National Committee of Lithuania. The Conference was
successful, and until 2010 it has been organized in Vilnius (2005), Kraków (2006), Kaunas (2007),
Białystok (2008), Vilnius (2009).
ORGANIZERS
Depatrment of Mechanics and Machine Design
Opole University of Technology
and Polish Society of Theoretical and Applied Mechanics, Opole Branch
CO-ORGANIZERS
Vilnius Gediminas
Technical University
Kaunas
University of
Technology
Bialystok Technical
University
The 6th International Conference Mechatronic Systems and Materials (MSM 2010) is being
organized by Department of Mechanics and Machine Design from Centre of Structural Integrity
(CESTI), Opole University of Technology, Vilnius Gediminas Technical University, Kaunas
University of Technology and Bialystok University of Technology.
The Conference is supported by European Structural Integrity Society (ESIS).
COMMITTEES
International Scientific Committee
Chairman:
Ewald MACHA (PL)
Nikos ASPRAGATHOS (GR)
Bronius BAKŠYS (LT)
Ramutis BANSEVIČIUS (LT)
Vytautas BARZDAITIS (LT)
Jaroslav BERAN (CZ)
Marijonas BOGDEVICIUS (LT)
Dariusz BOROŃSKI (PL)
Kaddour BOUAZZA-MAROUF (UK)
Simon BROWN (IL)
Algimantas BUBULIS (LT)
Jan Ryszard DĄBROWSKI (PL)
Egidijus DRAGASIUS (LT)
Giancarlo GENTA (IT)
Zdzisław GOSIEWSKI (PL)
Riza GURBUZ (TR)
Czeslaw KAJDAS (PL)
Saulius KAUSINIS (LT)
Okyay KAYNAK (TR)
Andreas KUGI (AT)
Genadijus KULVIETIS (LT)
Tadeusz ŁAGODA (PL)
Harald LOOSE (DE)
Krystyna MACEK-KAMIŃSKA (PL)
Dan MANDRU (RO)
Andrejus MARCINKEVICIUS (LT)
Andrzej MILECKI (PL)
Wiesław OSTACHOWICZ (PL)
Vytautas OSTASEVIČIUS (LT)
Robert PARKIN (UK)
Norberto J. PIRES (PT)
Algimantas POŠKA (LT)
Roma. RINKEVIČIENĖ (LT)
Bogdan SAPIŃSKI (PL)
Mirosław SKIBNIEWSKI (US)
Jerzy ŚWIDER (PL)
Joury TEMIS (RU)
Tadas R. TOLOCKA (LT)
Bronisław TOMCZUK (PL)
Radosław TRĘBIŃSKI (PL)
Tadeusz UHL (PL)
Algirdas VALIULIS (LT)
Vladas VEKTERIS (LT)
Joerg WALLASCHEK (DE)
Jinshu WANG (CN)
Organizing Committee
Prof. Ewald MACHA, chairman
Dr. Roland PAWLICZEK, secretary
Dr. Krzyszof KLUGER
Magdalena FILIPEK, M.A.
Joanna DROZD, M.A.
Małgorzata NOWICKA, M.A.
AIM AND SCOPE
The aim of the conference is to provide an opportunity to share information and facilitate cooperation in mechatronics and new materials and dissemination of current research results in this
multi-disciplinary field.
English will be the official language of the conference.
TOPICS:
Mechatronics systems:
1. Robotics: industrial robots , microrobotics, mobile robots;
2. Teleoperation, telerobotics, teleoperated semi-autonomous systems;
3. Sensors and actuators in mechatronics;
4. Control of mechatronics systems;
5. Analysis of vibration and deformation;
6. Optimization, optimal design;
7. Integrated diagnostics;
8. Failure analysis;
9. Tribology in mechatronics systems;
10. Analysis of signals;
11. Measurement techniques.
Materials (properties, modelling, manufacturing and processing):
12. Multifunctional and smart materials;
13. Metallic alloys;
14. Biomaterials;
15. Functional composites;
16. Adaptive materials;
17. Piezoelectric materials;
18. Nanomaterials;
19. Ceramics and glasses.
Education:
20. New trends in mechatronic and material science education;
21. New curricula concerning mechatronic systems and material science (both MSc and BSc
degrees);
22. Teaching materials and laboratory facilities.
CONFERENCE VENUE
MSM 2010 will take place in Opole University of Technology (Poland). Opole is an urban city and
the capital of Opolskie Voivodeship. It is one of the oldest settlemets in Poland, situated in the
south of Poland. Due to the location of Opole region, today a part of Silesian Lowland, the first
settlers appeared in the Middle Ages. The favorable defensive conditions, the swampy left-bank of
the Odra River and the intersection of the old trade routes made the region an attractive location.
The first reference to Opole, the town situated on the Odra River, appeared in the second half of
the 9th century. The history of Opole is related to Duke Casimir - the grandson of Ladislaus the
Wrymouthed; it was during his reign that the city was chartered (beginning of the 13th century)
and in 1283 Opole became the capital of the Duchy. The fortified castle situated on Pasieka Island
was the Duke's property. Located at the point where important European trade routes meet,
Opole has always been a major junction in this part of Europe.
Photos from Wikipedia under GNU Free Documentation Licens
Thanks to authors: Bartek Wawraszko, Kaww
TRAVEL INFORMATION
Nearest airports are in Wroclaw, Katowice and Krakow. Opole has very good roads (especially
motorway) and railway connections to those cities.
City bus to Conference Centre:
❏ line 3 – bus stop 1 Maja (near Railway Station and Bus Station) direction Pużaka – Pętla
(Pużaka - terminus); price of ticket 2.30 PLN (sold by bus driver: 2,60 PLN); travel time
aprox. 20 min; to get off on Mikołajczyka bus stop.
❏ line 11 – bus stop 1 Maja (near Railway Station and Bus Station) direction Pużaka – Pętla
(Pużaka - terminus); price of ticket 2.30 PLN (sold by bus driver: 2,60 PLN); travel time
aprox. 15 min; to get off on Sosnkowskiego - Politechnika bus stop.
line 3 and line 11
bus stop
Bus
Station
Railway
Station
The conference will take place at new building behind the Student Hostels by Mikolajczyka Str.
Mikołajczyka Str.
Conference
Centre
Hotel
FESTIVAL
Hostel
SOKRATES
CONFERENCE CENTRE
Campus of the Opole University of Technology (Politechnika Opolska).
CONFERENCE OFFICE
6nd International Conference
Mechatronic Systems and Materials
Opole University of Technology
Faculty of Mechanical Engineering
Department of Mechanics and Machine Design
ul. Mikołajczyka 5, 45-271 Opole, Poland
tel.: (+48 77) 4006134, fax: (+48 77) 4006343
e-mail: [email protected]
Conference website:
www.cesti.po.opole.pl/msm2010
CONFERENCE FEE
After 24-05- 2010
Participant 350 €
Postgraduate student 300 €
Accompanying person 150 €
The conference fee includes: book of abstracts and proceedings on CD (excluding accompanying
persons), participation in all sessions and conferences events (lunches, coffee breaks, welcome
reception, barbecue and selected excursion). After the conference the full papers will be published
in international journals:
1.
2.
3.
4.
Mechanical Systems and Signal Processing, Elsevier
Journal of Theoretical and Applied Mechanics, PTMTS
Physicochemical Mechanics of Materials - Materials Science, Springer, New York
The Archive of Mechanical Engineering, Polish Academy of Sciences
or in the book “Mechatronic Systems and Materials, MSM2010” published by Opole
University of Technology.
If the paper is not accepted by the Scientific Committee and its author resigns his participation in
the Conference for this reason, the fee will be transferred back. In any other cases of resignation,
a handling charge 50 € will be deducted. After 10 June, 2010 the fee will not be repaid.
The conference fees should be transferred to:
Currency: EURO only
Account holder: Polish Society of Theoretical and Applied Mechanics (PTMTS), Opole
Address: ul. Mikolajczyka 5, 45-271 Opole
Bank name: Millenium Bank S.A.
Bank address: ul. 1 Maja 6, 45-068 Opole, Poland
IBAN: PL 33 1160 2202 0000 0001 4850 1390
SWIFT CODE: BIGBPLPW
Please, add your name and the abbreviation
MSM 2010.
In exceptional cases the conference fee can be paid in Secretary Office in
Opole.
ACCOMMODATION AND EVENTS
The organizers offer accommodation in the Hotel FESTIVAL(near the Conference Center).
Hotel Festival
ul. Oleska 86
45 - 222 Opole
Reception:
tel. +48 77 427 55 55, 442 33 33
fax: +48 77 427 55 19
e-mail: [email protected]
www: http://www.festival.com.pl/en/
Walking distance to the Conference Venue: ca. 10 min.
Conference participants will receive special, reduced rates - prices from 225 zł/ per
night.
For detailed information, please contact Hotel Festival directly and, in all your correspondence
refer to: MSM 2010.
Note:
• Hotel Festival offers single, double and quadruple (family) rooms.
• Reservations will only be accepted in a written form (e-mail, fax);
• Discount offer is available until 10.06.2010;
• Reservations should include:
- date of arrival and departure,
- room type;
- personal information: full name, address, company details for VAT invoice,
- credit card information: for pre-authorisation the cost of the first night stay will be
charged;
- For reservations made without using a credit card, pre-payment covering the cost of the
first night stay is required (the Hotel issues pro-forma invoices).
Breakfast is included in the room price. Using the swimming-pool, jacuzzi and fitness room is also
free of charge. All rooms are equipped with paid mini-bars. Car parks are available at the
following prices: monitored 20 zł/day, guarded 30 zł/day.
Apart from the hotels in the city, organizers also suggest to consider booking cheap rooms in the
University Hotel:
Sokrates Hostel
ul. Malopolska 22
45-301 Opole
tel. +48 77 457 65 40
tel./fax +48 77 455 75 04
Walking distance to the Conference Venue: ca. 20 min.
Prices:
• single room – 50zl;
• place in a double room – 40 zl;
• place in a triple room – 30 zl;
• single room with a bathroom – 70 zl;
• single room with a bathroom and a kitchen facility – 90 zl;
Prices are guaranteed until 30 June 2010. Payment can only be made in cash (Polish zloty) on
the arrival.
Breakfast is not included in the price.
It is, however, available on request at the University Canteen near the Conference Venue between
05-08 July 2010. The breakfast price is 12 zl; per serving, paid in cash in the Canteen. If you wish
to arrange your breakfast, please email: [email protected] .
EXCURSIONS
The organizers provide an excellent opportunity to have a dinner in the hunting atmosphere
(barbecue). During the dinner there also will be an opportunity to encounter traditional Polish
manufactures (such as painting of Easter eggs, sculpting in the wood, lace making, pottery and
many more attractions) as well as purchase some of the best Polish souvenirs.
Excursion No. 1: It will be also possible to visit the Memorial and the Museum AuschwitzBirkenau where the permanent exhibition of Auschwitz I Main Camp is and to see the most
important remaining of the camp objects at Birkenau.
Excursion No. 2: For those who would like to explore coal mine, we provide excursion to a
unique coal mine GUIDO in Zabrze. Participants will go underground on depth 320 m.
Lunch for participants after the excursion.
Outline programme
SUNDAY, 4 July, 2010
17:00 - 19:00
Participants registration
19:00 - 21:00
GET TOGETHER
MONDAY, 5 July, 2010
8:00 - 9:30
Participants registration
9:30 - 10:15
Opening of the conference (Hall A)
10:15 - 11:00
Plenary session (Hall A)
Coffee break
11:00 - 11:20
11:20 - 13:00
Paper session A1 (Hall A)
Paper session B1 (Hall B)
Lunch
13:00 - 14:15
14:15 - 15:55
Paper session C1 (Hall C)
Paper session A2 (Hall A)
Paper session B2 (Hall B)
15:55 - 16:15
Coffee break
16:15 - 17:45
Poster session I (Main Hall)
18:00 - 20:00
Walking city tour
Paper session C2 (Hall C)
TUESDAY, 6 July, 2010
Plenary session (Hall A)
9:00 - 9:45
10:00 - 11:00
Paper session A3 (Hall A)
Paper session B3 (Hall B)
Coffee break
11:00 - 11:20
11:20 - 13:00
Paper session C3 (Hall C)
Paper session A4 (Hall A)
Paper session B4 (Hall B)
13:00 - 14:15
Lunch
14:15 - 15:45
Poster session II (Main Hall)
15:45 - 16:05
Coffee break
17:00 - 22:00
Outdoor Barbecue Dinner
WEDNESDAY, 7 July, 2010
Plenary session (Hall A)
9:00 - 9:45
10:00 - 11:00
Paper session A5 (Hall A)
Paper session B5 (Hall B)
Coffee break
11:00 - 11:20
11:20 - 13:00
Paper session C5 (Hall C)
Paper session A6 (Hall A)
Paper session B6 (Hall B)
13:00 - 14:15
Lunch
14:15- 15:45
Poster session III (Main Hall)
15:45 - 16:05
Coffee break
16:05 - 16:20
Closing of the conference (Hall A)
THURSDAY, 8 July, 2010
7:00 - 16:00
EXCURSION #1: Memorial and the Museum Auschwitz-Birkenau
8:30 - 16:30
EXCURSION #2: GUIDO Coal Mine
PRELIMINARY PROGRAMME
Attention: All paper sessions marked by A, B and C will take place in Hall A, Hall B
and Hall C respectively.
Poster Session will be placed in Main Hall.
4.07.2010 (Sunday)
17:00 – 19:00
19:00 – 21:00
Registration of the participants
GET TOGETHER
5.07.2010 (Monday)
8:00 - 9:30 Main Hall
Participants registration
9:30 - 10:15 Hall A
OPENING OF THE CONFERENCE
10:15 – 11:00
Hall A
Plenary session:
GRZELAK Józef, KAROLCZUK Aleksander: Identification of elliptic rotors geometric parameters based on
image analysis
11:00 – 11:20 Coffee break
11:20 – 13:00
Paper session A1: Control Systems
1. PILAT Zbigniew, GRABIŃSKI Marek, KOPACZ Wiesław, OLCZAK Jan: Quality control in the
automatic line for final assembly of fuse-links
2. BANAŚ Michał , ANTONIAK Piotr: Concept of active system for pressure pulsation coefficient
reduction in the displacement pumps
3. GUBAREV Aleksandr, GANPANTSUROVA Oksana: Raise of power efficiency of wind turbines with a
hydraulic system of power take-off and redistribution
4. HAUKE Mikołaj , MILECKI Andrzej: Application of megnetorheological fluid in industrial shock
absorber
5. WOŚ Piotr, DINDORF Ryszard: Problems of the adaptive control for electro-hydraulic servo-system
Paper session B1: Actuators
1. GRIGAS Vytautas, KAZLAUSKIENĖ Kristina, ŠULGINAS Anatolijus, TOLOČKA Rymantas Tadas:
Initial investigation of the magnetorheological fluid loading unit of rowing simulator
2. DOMINIK Ireneusz: Real time auto-tuning algorithm in controlling the SMA actuator
3. LUNGU Ion, MANDRU Dan, NOVEANU Simona :Measurement of the SMA wires parameters
4. LUNGU Ion, MANDRU Dan, NOVEANU Simona: Circuit board for a linear actuator with SMA wires
5. TOMCZUK Bronisław, KAROLCZUK Aleksander, WAINDOK Andrzej, WAJNERT Dawid: Fatigue tests
of materials with the electromagnetic actuator application
Paper session C1: Modelling and Simulations
1. UZUNOV Oleksandr: The cyclic- modular approach in simulating and designing of the mechatronic
objects
2. CHUDÝ Peter, RZUCIDŁO Paweł: Experimental simulator of advanced light aircraft
3. GU P., GUNDERSEN R., KALVIK A.O., SALVESEN R., KARIMI H.R. :Data gathering for stabilization
of a high speed catamaran
4. LACHOWICZ Dorian: Dynamic analysis of loading module in MZGS fatigue stand
5. MURZINTSEV Aleksey: Modelling of an electromagnetic drive gear of an automobile braking system
with indemnification of deterioration of brake pads
13:00 – 14:15 Lunch
14:15 – 15:55
Paper session A2: Materials
1. CHOWDHURY S., AKRAM M.W., CHOWDHURY S.C.: Effect of morphology of CNT-bundle on polymer
composites
2. ÇOŞGUN Ahmet, OKUYAN Cemal, DOĞDU Nafel: Biocompatibility investigation of steel 420 ın
plasma (human body oil)
3. STRAZDINA Inguna, RUDZITIS Janis: Physical properties of Gallium dopped Zinc oxide coating on
two different roll to roll substrates
4.
KUREK Marta, ŁAGODA Tadeusz: Comparison of fatigue characteristics for some selected
constructional materials under bending and torsion
5. MUIZNIEKS Gatis, GERINS Eriks, OZOLINS Janis, MUIZNIECE Vineta: Analysis of providing rotor
surface resistance to wear
Paper session B2: Signal processing and vibration analysis
1. KROPIWNICKI Jacek, KNEBA Zbigniew: Phenomenological correction of height above ground level
of vehicle derived from GPS system
2. MACHA Ewald, PAWLICZEK Roland: Application of the Rosenblatt transform for generation of the
random loadings with desired correlation coefficient
3. NEUGEBAUER Reimund, HELLMICH Arvid, HOFMANN Stefan, SCHLEGEL Holger: Non-invasive
parameter identification by using the least squares method
4. ŻÓŁKIEWSKI Sławomir: Longitudinal and transversal damped vibrations of the beam on rotational
disk
5. BOĞA Cem , ŞİMŞEK Erdoğan, BULGURCU Hüseyin: Torsional vibration analysis of multi shaft-disc
systems
Paper session C2: Modelling and Simulations
1. GURBUZ Riza, DONERTAS Mehmet Ali, MAMUR Hayati: Experimental torque-speed analysis of
selected AC servo motors for desk-top CNC milling machine
2. KLEINMANN Stefan, DABROWSKA Anna, KOLLER-HODAC Agathe, LEONARDO Domenico: Model of a
combined pump and drive system for advanced control and diagnosis
3. TEMIS Mikhail, LAZAREV Alexander: Elastohydrodynamic contact in thrust bearing
4. ORLIKOWSKI Cezary, HEIN Rafał: Modelling and analysis of beam/bar structures by application of
bond graphs
5. ORLIKOWSKI Cezary, HEIN Rafał: Reduced order model of beam/bar structure
15:55 – 16:15 Coffee break
16:15 – 17:45
Poster session I
6.07.2010 (Tuesday)
9:00 – 9:45
Hall A
Plenary session:
GOSIEWSKI Zdzisław, KULESZA Zbigniew: A new method for the actuators and sensors recollocation
10:00 – 11:00
Paper session A3: Robotic
1. KASPRZYCZAK Leszek, MRÓZ Jerzy, NOWAK Damian, PIASECKI Adam, TRENCZEK Stanisław:
Mobile robot for monitoring explosive hazardous zones as a mechatronic product
2. SEYBOLD Lothar, KROKOWICZ Jaroslaw, PACZYNSKI Andreas, STETTER Ralf: Advanced control and
diagnosis for mobile robots
3. ALUŢEI Adrian, TǍTAR Mihai Olimpiu, MǍTIEŞ Vistrian: The development of a modular inspection
system
Paper session B3: Piezoelectric actuators and transducers
1. LUCINSKIS Raimundas, MAZEIKA Dalius, BANSEVICIUS Ramutis: Investigation of contact point
trajectories of the piezoelectric actuator with two directional polarizations
2. NOVEANU Simona, MANDRU Dan, LUNGU Ion, CSIBI Vencel, NOVEANU Dan: Experimental
research of a mini-system with piezoelectric actuation
3. ALUŢEI Alexandra-Maria, CHETRAN Beniamin, MÂNDRU Dan :Development of an interface for
refreshable Braille devices
Paper session C3: Control systems
1. GÜCÜYENER İsmet: The possibility approached fuzzy logic control application
2. KOPECKI Grzegorz, ROGALSKI Tomasz: Aircraft attitude calculation in case of missing
correction signals
3. MOJRZISCH Sebastian, WALLASCHEK Jörg: Actively controlled high load capacity
ultrasonic squeeze film bearing
4.
11:00 – 11:30 Coffee break
11:30 – 13:00
Paper session A4: Control systems
1. GURBUZ Riza: Controlling flow rate and fluid level by Variable Frequency Drive unit
2. NEUGEBAUER Reimund, HOFMANN Stefan, HELLMICH Arvid, SCHLEGEL Holger: Time-based
method for the combined identification of velocity-loop parameters
3. ZAPATEIRO Mauricio, LUO Ningsu, KARIMI Hamid Reza: Vehicle suspension control through a
nonlinear approach of the Quantitative Feedback Theory
4. KOSZEWNIK Andrzej, GOSIEWSKI Zdzisław: Frequency domain identification of the active space
truss model for the vibration control system
Paper session B4: Measurements and sensors
1. IVANOVA T., RUDZITIS J.: Mass measurement interlaboratory comparison in Latvia
2. OSTAPKOWICZ Paweł: The active sensors based on corrective elements as a source of diagnostic
information in leakages diagnosing from transmission pipelines
3. GRZELAK Józef, MORAWSKI Stanisław: An idea of research stand for kinematics and dynamics
experimental tests of belt variable transmission ratio gear with elliptic rotors
4. PUCHER Krzysztof, POLOK Dariusz: Application of single-board with the embedded DOS operating
system as central units of data acquisition system used for mechatronic measurements
5. GÜCÜYENER İsmet: Fuzzy based tool wear monitoring design with power sensor and fiber-optic
sensor for the CNC milling machine
13:00 – 14:15 Lunch
14:15 – 15:45
Poster session II
15:45 – 16:15 Coffee break
17:00 – 22:00
Outdoor Barbecue Dinner
7.07.2010 (Wednesday)
9:00 – 9:45
Hall A
Plenary session:
NEUBAUER Marcus, WALLASCHEK Jörg: Vibration damping with shunted piezoceramics: fundamentals and
technical applications
10:00 – 11:00
Papaer session A5: Control systems
1. NEUGEBAUER Reimund, QUELLMALZ Johannes, SCHÖNHERR Ruben, SCHLEGEL Holger: Control of
a servo-pneumatic experimental rig
2. PIŁAT Adam: µ synthesis of robust controller for active magnetic levitation system
3. PILSAN Horatiu, GMEINER Christian, AMANN Robert, SCHNEIDER Reinhard: Middleware for
programmable logic controls
Paper session B5: Education
1. BULGURCU Hüseyin: A case study: designing of multi control trainer for mechatronic education
2. MÂNDRU Dan, LUNGU Ion, NOVEANU Simona, TĂTAR Olimpiu: Product dissection as a method for
learning mechatronics
3. TOLOCKA Rymantas Tadas: Mechanical engineering and mechatronics: study programs
development
Paper session C5: Designs and simulations
1. BUCHACZ Andrzej: Hypergraphs of beams analyzing by means the exact and
approximate methods as models of flexibly vibrating subsystems in synthesis of
mechanical and mechatronic systems
2. RYBAK Larisa, GOPONENKO Elena , ERZHKOV Viktor: Design of kinematics model and
control for 6-DOF parallel robot
3. KOZIOŁEK Sebastian,RUSIŃSKI Eugeniusz, SŁUPIŃSKI Mateusz: Optimal design with the
use of Design Representation Space
11:00 – 11:30 Coffee break
11:30 – 13:00
Paper session A6: Electromagnetic, bearings
1. MYSTKOWSKI Arkadiusz, ROWIŃSKI Artur: Construction and control of AMBs high speed flywheel
2. FALKOWSKI Krzysztof: The identification dynamic characteristic of the passive magnetic bearing
with Halbach array
3. MIATLIUK Kanstantsin, GOSIEWSKI Zdzisław, SIEMIENIAKO Franciszek: Coordination technology
of hierarchical systems in mechatronic design of magnetic bearings
4. PIŁAT Adam: Optimal levitation gap meshing and area calculation in the active magnetic bearing
5. HENZEL Maciej, OLEJNIK Aleksander, ŻOKOWSKI Mariusz: The new construction of actuators for
More Electric Aircraft
Paper session B6: Materials
1. TEMIS J.M, AZMETOV Kh.Kh., FLEMING W.J.: Comparison of two models of numerical
simulation of low cycle fatigue of a plastic material with small rigid inclusions
2. WANG Jinshu, LI Hui, LI Hongyi, HUANG Kelin, SUN Guosong: Synthesis and
characterization of mesoporous TiO2 with large pore size
3. MOKSHIN Vadim, VEKTERIS Vladas: Effectiveness of liquid crystal additive in the cutting
fluid
4. TEMIS J.M., AZMETOV Kh.Kh., ZUZINA V.M.: Stochastic models of engine components
life time prediction
5. TOKMACHOV Oleg: Economic aspects of laser processing in machinery and apparatus
building
13:00 – 14:15 Lunch
14:15 – 15:45
Poster session III
15:45 – 16:15 Coffee break
16:15 – 17:00
CLOSING OF THE CONFERENCE
8.07.2010 (Thursday)
7:00 – 16:00 Excursion 1:
9:00 – 16:30 Excursion 2:
Memorial and the Museum Auschwitz-Birkenau
Guido Coal Mine
Poster session I
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
BIAŁAS Katarzyna: Kinematic excitations in active reduction of vibrations
BIENIEK Andrzej, GRABA Mariusz, MAMALA Jarosław, LECHOWICZ Andrzej: Sensor based control of
diesel injection
BUCHACZ Andrzej, GAŁĘZIOWSKI Damian: Synthesis of mechatronic vibrating systems
CIREBEA Claudiu, TǍTAR Olimpiu, MǍTIES Vistrian: The model and simulation of a mini robot with
adaptable active structure to the pipe diameter
DRAGAŠIUS Egidijus, JŪRĖNAS Vytautas, RUGAITYTĖ Viktorija, MAŽEIKA Darius: Multifunctional
electromagnetic system for magneto-rheological fluid mixing and monitoring
DUSEK Daniel: Design of an artificial MEMS cochlea
GRABA Mariusz, LECHOWICZ Andrzej, MAMALA Jarosław, JANTOS Jerzy, BIENIEK Andrzej, KOWALSKI
Damian: Adaptive control of a EGR valve
GUBAREV Aleksandr, YAKHNO Oleg, GANPANTSUROVA Oksana: Testing of logic correctness of control
algorithms of mechatronic discrete systems with parallel processes
GUSEINOVIENĖ Eleonora, SENULIS Audrius, ANDZIULIS Arūnas, VAUPŠAS Jonas, RUDNICKIJ Boris:
Energy saving LED technology analysis and implementation in public space lighting
GUŽAS Danielius: The dynamic effect of the moving trains on the railroad rails and propagation of
excited vibrations and noise
JASIŃSKI Ryszard: Hazards in components of hydrotronic systems during start in low ambient
temperatures
KIBIRKŠTIS Edmundas, VAITASIUS Kęstutis, PAULIUKAITIS Darius: Area of synchronous work of
pneumatic self-exciting vibrodrives
KILIKEVIČIUS Artūras, JUREVIČIUS Mindaugas: Research of dynamics of the vibration isolation platform
KILIKEVIČIUS Artūras, VEKTERIS Vladas: Research of dynamics of the line scale gage calibration system
LINDSTEDT Paweł, GOLAK Karol: Premises for comprehensive parametric evaluation of the condition of
turbojet engine regulation
16. LIPINSKI Piotr, BRZYCHCZY Edyta, ZIMROZ Radoslaw: Planetary gearboxes condition monitoring under
non-stationary operations by adaptive decision trees based classification of vibration data in
multidimensional symptom space
17. LIPIŃSKI Krzysztof: Studies on the electromagnetic damping – velocity amplification with a mechanism
position close to its singular position
18. MARCINKEVIČIUS Andrejus Henrikas: Hydrodynamic Tilting Pad Journal Bearing with Automatic Control
19. MICHAŁOWSKI Grzegorz, GOSIEWSKI Zdzisław: Minimum-time trajectory generation of two-link
hydraulic robot
20. OKARMA Krzysztof, DWORAK Paweł: Video based positioning of details in the numerically controlled
machine tools
21. PRAŻNOWSKI Krzysztof, MAMALA Jarosław, KAMIŃSKI Marcin: Application of LabVIEW environment to
control the propulsion system car
22. TǍTAR Olimpiu, CIREBEA Claudiu, ALUŢEI Adrian, MÂNDRU Dan: Driving modules with adaptable
structure for in pipe inspection modular robotic systems
23. URBAHS Alexanders, BANOV Muharby, DOROSHKO Sergey, TURKO Vladislav, FESHCHUK Jury: Acoustic
emission checking of welded rail joints
24. VASYLIUS Marius, BOGDEVIČIUS Marijonas, DIDŽIOKAS Rimantas: Vibration research on low rotation
speed rotor of cylindrical roller with rolling bearings
25. WRÓBEL Andrzej: Influence of piezoelectric plates number in stack on characteristics of mechatronic
system
Poster session II
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
BANAŚ Michał , ANTONIAK Piotr: Start-up simulation of the multifunctional hydraulic gear machine with
the friction clutch
BANSEVICIUS Ramutis, BUBULIS Algimantas, JURENAS Vytautas, NAVICKAITE Sigita: Investigation of
dynamics of the piezoelectric bimorphs for laser shutter systems
BOGDEVICIUS Marijonas, JANUTENIENE Jolanta: Investigation of bearing diagnostic equipment dynamic
processes
BOGOROSH Alexander, BUBULIS Algimantas, VORONOV Sergej, JURENAS Vytautas: The formation of
nanodomain structures and damages in segnetoelectrics as a result of mechanical vibration or impact
DERLUKIEWICZ Damian, KARLIŃSKI Jacek:Static and dynamic analysis of telescopic boom of selfpropelled tunnelling machine
DZICZKOWSKI Leszek: Conductivity and roughness measurements with the eddy currents method
KAROLCZUK Aleksander, ROBAK Grzegorz: Strain measurements using image and correlation analysis
KNEBA Zbigniew, KROPIWNICKI Jacek: Oxygen sensor delay time in exhaust system
KOPCZYŃSKI Artur , RUSIŃSKI Eugeniusz , KARLIŃSKI Jacek: Axial compression of spot welded
longitudinal beams
KOTOWSKI Adam: Reading the frequency of harmonics by cross-correlation function and its envelope
KRYSIŃSKI Paweł, CHMIELARCZYK Michał, ŁAGODA Tadeusz: Fatigue stand of windows and doors for the
high-speed trains
KUMERMANIS Maris, RUDZITIS Janis: Determination of number of data points for 3D surface roughness
measuring in nano-level
KWAŚNIEWKI Janusz, DOMINIK Ireneusz, KONIECZNY Jarosław, LALIK Krzysztof, SAKEB Abdurahim:
Application of self-oscillation system for stress measurement in sandstone bar
LECHOWICZ Andrzej, JANTOS Jerzy: Design and analysis of the parallel hybrid powertrain
LECHOWICZ Andrzej, JANTOS Jerzy: Simulation of the parallel hybrid powertrain properties with use of
Matlab/Simulink
LINDSTEDT Paweł, GRĄDZKI Rafał: Model for blade diagnosis in a working rotor machine employing the
method of virtual elimination of its stochastic environment
MAJKUT Leszek: Quantitative analysis of phase trajectories as the information about technical condition
of the object
ROZUMEK Dariusz, MARCINIAK Zbigniew: Cyclic properties of notched specimens made of FeP04 steel
RUSINSKI Eugeniusz, KOZIOŁEK Sebastian, JAMROZIAK Krzysztof: Quality assessment of high mobility
multi-purpose vehicles in ballistic armour design
RUSIŃSKI Eugeniusz, SMOLNICKI Tadeusz, KACZYŃSKI Paweł: Overhead travelling crane trestles
analysis in the respect of load-carrying ability increase
SMOLNICKI Tadeusz, KOZIOLEK Sebastian, JAMROZIAK Krzysztof: Analysis of punching process of
ballistic shield with the use of Finite Element Model
SMOLNICKI Tadeusz, MAŚLAK Paweł: Experimental identification of loads in multi-caterpillar mechanism
of the ride of dumping conveyor
VAIČIŪNAS Gediminas, LINGAITIS Leonas Povilas, ČERNAŠĖJUS Olega, RUDZINSKAS Vitalijus: The
research of reasons of locomotives wheel fragmentation
Poster session III
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
ADAMCZYK Lidia, KULESZA Paweł: Application of poly(3,4-etylenedioxythiophene) and 4-(pyrrole-1-yl)
benzoic acid with phosphomolybdic acid composite films for stabilization of passive layers on stainless
steels
ADAMCZYK Lidia, PIETRUSIAK Anna,Henryk BALA:Corrosion resistance of stainless steel covered by 4aminobenzoic acid films
AMOKRANE Mounir, DUHAYON Eric: Characterization of ferromagnetic silicones for flexible actuation
concept - illustration with integrated coils in membranes
BRINKIENE Kristina, KEZELIS Romualdas, CESNIENE Jurate, MILIESKA Mindaugas, ZUNDA Audrius:
Development of bioinert ceramic coatings by plasma spray technology
BUCHACZ Andrzej, Andrzej WRÓBEL, PŁACZEK Marek: Control of characteristics of mechatronic systems
using piezoelectric materials
BUCHACZ Andrzej, PŁACZEK Marek: Characteristics of mechatronic system with piezoelectric transducer
BUCHACZ Andrzej, PŁACZEK Marek: Characteristics of mechatronic system with piezoelectric transducer
CHAARI Fakher, BARTELMUS Walter, ZIMROZ Radoslaw, FAKHFAKH Tahar, HADDAR Mohamed: Nonlinear
behaviour of a gear transmission subjected to combined backlash in gear and bearings
DUDEK Agata: Properties of sintered stainless steel as biomaterials in medicine
GOLAŃSKI Grzegorz: Mechanical properties of the GX12CrMoVNbN91 (GP91) cast steel after different
heat treatments
KOTNAROWSKA Danuta: Influence of polymer coatings modification with nanoparticles on their erosion
KOTNAROWSKI Andrzej: Metal nanoparticles as modifiers of oils used in frictional joints
KUCHARSKA Barbara: Non-destructive measurement of PVD 310S steel-based coatings density using
different X-ray methods
LI Hongyi, WANG Jinshu, HUANG Kelin, SUN Guosong, ZHOU Meiling: In-situ preparation of multi-layer
TiO2 nanotube array thin films
MAJER Zdenek, NOVOTNA Eva:Numerical Estimation of the Tensile Properties of the composite with rigid
particles
RUSZ S., CIZEK L., DUTKIEWICZ J., PRAŻMOWSKI M., TYLŠAR S., KEDRON J., DIVIN V.: Equal channel
angular extrusion of AlMn1Cu alloy with helical geometry of tool
SMOLNICKI Tadeusz, KOWALCZYK Marcin, PIETRUSIAK Damian: Identification of dynamic characteristics
of a stacker
TAŃSKI Tomasz, DOBRZAŃSKI L.A., LABISZ Krzysztof: Corrosion behaviour of die-casting magnesium
alloys
TOMCZUK Bronisław, WAINDOK Andrzej, KOTERAS Dariusz, WAJNERT Dawid: Determination of selected
parameters for the mechatronic system based on modern magnetic materials
TOMCZUK Bronisław, ZIMON Jan, WAJNERT Dawid: Influence of the magnetic linkage between the
electromagnets in the active magnetic bearings (AMB) on the field distribution
WALKE Witold, PRZONDZIONO Joanna: Electrochemical investigations of Cr-Ni-Mo stainless steel used on
implants in urology
WŁODARCZYK Renata: Effect of pH on corrosion of sintered stainless steels used for bipolar plates in
polymer exchange membrane fuel cells
WŁODARCZYK Renata: Stereological description of austenitic powders used as materials for
interconnectors in fuel cells
WRÓBEL Anna, KUCHARSKA Barbara: Characteristics of the mechanical properties of Al-Si coating made
by different technologies
Download

4Printers - Dariusz Mikos: MojePortfolio