Barbaros C
¸ etin, Ph.D.
CONTACT
INFORMATION
EDUCATION
˙
Ihsan
Do˘
gramacı Bilkent University
Mechanical Engineering Department EA–124
06800 C
¸ ankaya Ankara TURKEY
Phone: +90-312-290-2108
Fax: +90-312-209-4126
E-mail: [email protected]
Vanderbilt University, Nashville, TN, USA
Ph.D., Mechanical Engineering (CGPA: 4.00/4.00)
August 2009
Thesis Title: Microfluidic Continuous Separation of Particles and Cells by using AC-Dielectrophoresis
Advisor: Prof. Dr. Dongqing Li
Middle East Technical University (METU), Ankara, Turkey
Ph.D., Mechanical Engineering (CGPA: 3.92/4.00)
Advisor: Prof. Dr. Hafit Y¨
unc¨
u
Co-advisor: Prof. Dr. Sadık Kaka¸c
School transfer follows
August 2006
Middle East Technical University (METU), Ankara, Turkey
M.Sc., Mechanical Engineering (CGPA: 3.92/4.00)
January 2005
Thesis Title: Analysis of Single Phase Convective Heat Transfer in Microtubes and Microchannels
Advisor: Prof. Dr. Hafit Y¨
unc¨
u
Co-advisor: Prof. Dr. Sadık Kaka¸c
RESEARCH
INTERESTS
Middle East Technical University (METU), Ankara, Turkey
B.Sc., Mechanical Engineering (CGPA: 3.67/4.00)
June 2002
˙
Private Ihsan
C
¸ izaka Lisesi, Bursa, Turkey
High School, (CGPA: 5.00/5.00)
June 1997
Microfluidics and lab-on-a-chip technology for biomedical applications
Electrokinetic transport and particle manipulation inside microchannels
Modeling of particle motion in microchannels using Boundary Element Method
Micro- and nano-fabrication techniques for microfluidic devices
Microscale convective heat transfer
Computational heat transfer
Analytical methods for thermo-fluid problems
C
¸ etin–Curriculum Vitae (October 2014)
1
PROFESSIONAL
EXPERIENCE
˙
Ihsan
Do˘
gramacı Bilkent University (BilMECH)
Mechanical Engineering Department, Ankara, Turkey
Assistant Professor
ABET Coordinator
Academic Advisor of Mechanical Engineering Society
Graduate Study Coordinator
August 2011 – Present
January 2014 – Present
January 2013 – Present
January 2012 – June 2014
Middle East Technical University-Northern Cyprus Campus (METU–NCC)
Mechanical Engineering Program, G¨
uzelyurt, T.R.N.C. Mersin 10, Turkey
Assistant Professor
December 2010 – July 2011
Middle East Technical University-Northern Cyprus Campus
Mechanical Engineering Program, G¨
uzelyurt, T.R.N.C. Mersin 10, Turkey
Instructor Dr.
September 2009 – December 2010
Vanderbilt University, Dept. Mechanical Engineering
Microfluidics and Lab-on-a-chip Laboratory, Nashville, TN USA
Research Assistant
September 2006 – August 2009
Vanderbilt University, Dept. Mechanical Engineering, Nashville, TN USA
Teaching Assistant
January 2008 – January 2009
Vanderbilt University, Sarah Shannon Stevenson Science & Engineering Library
Graduate Student Supervisor
Summer 2007, Summer 2008, Summer 2009
METU, Dept.Mechanical Engineering, Ankara, Turkey
Teaching and Research Assistant
September, 2002 – August, 2006
Turk Pirelli Cable Systems A.S
¸ ., Bursa, Turkey
Intern Engineer
June 2001 – August 2001
C
¸ o¸skun¨
oz A.S
¸ ., Machine Manufacturer and Foundry, Bursa, Turkey
Intern Engineer
June 2000 – August 2000
TEACHING
EXPERIENCE
Bilkent University
ME
ME
ME
ME
ME
ME
211
212
432
501
511
615
-
Thermo-Fluids Engineering I (Fall 2011, Fall 2012, Fall 2013, Fall 2014)
Thermo-Fluids Engineering II (Spring 2012, Spring 2013, Spring 2014)
Applied Thermodynamics (Fall 2012, Fall 2014)
Mathematical Techniques in Mechanical Enginnering I (Fall 2013)
Advanced Fluid Mechanics (Spring 2012, Spring 2013)
Microfluidics (Fall 2011)
METU–NCC
PNGE 211 – Introduction to Fluid Mechanics (Spring 2011)
MECH 220 - Mechanical Engineering Laboratory 1 (Spring 2010, Spring 2011)
MECH 305 – Fluid Mechanics (Fall 2009, Fall 2010)
CHME 323 – Fluid Mechanics (Fall 2009, Fall 2010)
MECH 405 – Energy Conversion Systems (Fall 2009, Fall 2010)
MECH 458 – Graduation Project (Spring 2010, Fall 2010, Spring 2011)
MECH 468 - Introduction to Microfluidics (Spring 2010, Spring 2011)
C
¸ etin–Curriculum Vitae (October 2014)
2
HONORS
AND AWARDS
¨
Associate Professor degree from Higher Education Council of Turkey (YOK),
2014
˙
¨
˙
Undergraduate research advisee Ilbey Karakurt is awarded TUBITAK 2209/A funding, 2013
¨ ITAK
˙
TUB
Career Award, 2012
Graduated from METU with High-honor standing, 2002
Turkish Education Foundation Scholarship, 1997–2002
Graduated from the high school with the 1st ranking, 1997
Scholarship throughout the secondary education for the outstanding academic standing, 1991–
1997
SKILLS
Programming & Software: Pascal, C++, MatLab, Mathematica, Maxima, LATEX, COMSOL Multiphysics, Fluent, MathCad, AutoCad, Solidworks
Operating Systems: Windows, Linux (Ubuntu), Mac OS X
Languages: Turkish (Native), English (Fluent)
THESIS AND
M.S. Thesis (On-going)
DISSERTATIONS
(1) Thesis Title: Modeling and fabrication of micro-grooved heat pipes for high flux electronic
cooling
Student: Serdar Taze
Supervisor: Asst. Prof. Dr. Barbaros C
¸ etin
Co-supervisor: Prof. Dr. Zafer Dursunkaya (METU–ME)
Date: January, 2015 (Expected)
(2) Thesis Title: Boundary element formulation of particle flow in a microchannel
Student: Reza Rasooli
Supervisor: Asst. Prof. Dr. Barbaros C
¸ etin
Co-supervisor: Asst. Prof. Dr. Besim Barano˘glu (Atılım University–MNFE)
Date: August, 2016 (Expected)
(3) Thesis Title: Separation of microparticles using ultrasonic waves
Student: S¨
uleyman B¨
uy¨
ukko¸cak (TOBB ETU–ME)
¨
Supervisor: Asst. Prof. Dr. B¨
ulent Ozer
(TOBB ETU–ME)
Co-supervisor: Asst. Prof. Dr. Barbaros C
¸ etin
Date: November, 2014 (Expected)
(4) Thesis Title: Forward problem of electrocardiography in terms of transmembrane potentials within 3D heart
Student: Gizem Bedir (METU–EE)
Supervisor: Assoc. Prof. Dr. Ye¸sim Serina˘gao˘glu Do˘grus¨oz (METU–EE)
Co-supervisor: Asst. Prof. Dr. Barbaros C
¸ etin
Date: December, 2014 (Expected)
(5) Thesis Title: Sterilization characteristic of polymer microfluidic devices for biomedical
applications
Student: Cansu Yavuz (Ege University, Bio-engineering)
¨
Supervisor: Assoc. Prof. Dr. Ozlem
Ye¸sil-C
¸ elikta¸s (Ege University, Bio-engineering)
Co-supervisor: Asst. Prof. Dr. Barbaros C
¸ etin
Date: June, 2015 (Expected)
C
¸ etin–Curriculum Vitae (October 2014)
3
M.S. Thesis (Completed)
(1) Thesis Title: Microfluidic device with 3D electrode structure for high throughput dielectrophoretic applications
Student: Soheila Zeinali
Supervisor: Asst. Prof. Dr. Barbaros C
¸ etin
Date: October, 2014
(2) Thesis Title: Computational modeling of fin-and-tube type vehicle radiators based on
porous medium approach
Student: Kadir G¨
okhan G¨
uler
Supervisor: Prof. Dr. Mehmet Haluk Aksel (METU–ME)
Co-supervisor: Asst. Prof. Dr. Barbaros C
¸ etin
Date: May, 2014
(3) Thesis Title: Micro-injection molding of polymeric microfluidic devices
Student: A. Koray Koska
Supervisor: Asst. Prof. Dr. Barbaros C
¸ etin
Date: October, 2013
(4) Thesis Title: Analysis of single phase fluid flow and heat transfer in slip-flow regime by
parallel implementation of Lattice-Boltzmann Method on GPUs
Student: Sıtkı Berat C
¸ elik (METU–ME)
Supervisor: Asst. Prof. Dr. C¨
uneyt Sert (METU–ME)
Co-supervisor: Asst. Prof. Dr. Barbaros C
¸ etin
Date: September, 2012
PROJECTS
Research Projects (Under review):
(1) Project Title: Determination of microbial load and the number of somatic cells in whole
milk by an integrated microfluidic device
¨ ITAK–1001
˙
Project Number: TUB
(Accepted)
PI: Asst. Prof. Dr. Barbaros C
¸ etin
Co-PI: Asst. Prof. Dr. G¨oksel Durkaya (Atlm University–MME)
Co-PI: Assoc. Prof. Dr. Duygu Kı¸sla (Ege University–FE)
Co-PI: Dr. G¨
ulten G¨
und¨
uz (Ege University–FE)
Project Period: 30 months
Total Budget: 299,868 TL (approx. 100,000 EUR)
Research Projects (On-going):
(1) Project Title: Development and fabrication of micro-grooved heat pipes for high-flux electronic cooling applications
¨ ITAK–1001:
˙
Project Number: TUB
213M351
PI: Prof. Dr. Zafer Dursunkaya (METU–ME)
Co-PI: Asst. Prof. Dr. Barbaros C
¸ etin
Date: February 2014–July 2016 (30 months)
Total Budget: 299,563 TL (approx. 100,000 EUR)
C
¸ etin–Curriculum Vitae (October 2014)
4
(2) Project Title: Development of a lab-on-a-chip device for the manipulation of microparticles
using AC-dielectrophoresis and acoustic methods
¨ ITAK–3501:
˙
Project Number: TUB
112M102
PI: Asst. Prof. Dr. Barbaros C
¸ etin
¨
Co-PI: Asst. Prof. Dr. B¨
ulent Ozer
(TOBB ETU–ME)
Date: November 2011–October 2014 (24 months)
Total Budget: 182,180 TL (approx. 65,000 EUR)
(3) Project Title: Development of Boundary Element Method based commercial software for
microfluidic applications
¨ ITAK–1512:
˙
Project Number: TUB
2130311
Entrepreneur: Asst. Prof. Dr. Barbaros C
¸ etin
Project Period: 12 months
Total Budget: 99,720 TL (approx. 35,000 EUR)
(4) Project Title: Development and experimental verification of a numerical model for a microfluidic polymerase chain reactor
¨ ITAK–2209/A
˙
Project Number: TUB
(1919B011302937)
Advisor: Asst. Prof. Dr. Barbaros C
¸ etin
Project Period: 12 months
Total Budget: 2,500 TL (approx. 900 EUR)
Research Projects (Completed):
(1) Project Title: Analysis of Single Phase Fluid Flow and Heat Transfer in Micro-Channels
by Parallel Implementation of Lattice Boltzmann Method on GPUs
¨ ITAK–110M750
˙
Project No: TUB
PI: Asst. Prof. Dr. C¨
uneyt Sert (METU–ME)
Co-PI: Asst. Prof. Dr. Barbaros C
¸ etin
Date: February, 2011 – February, 2012 (12 months)
Total Budget: 15,000 TL (approx. 6,500 EUR)
(2) Project Title: Establishment of Microfluidics & Lab-on-a-chip Group at METU–NCC
Project Number: METU–NCC BAP-FEN10
PI: Asst. Prof. Dr. Barbaros C
¸ etin
Date: May, 2010 – May, 2012 (24 months)
Total Budget: 21,472 TL (approx. 9,500 EUR)
ME 490–Undergraduate Research Projects
(1) Development and experimental verification of a numerical model for a micro- fluidic polymerase chain reactor
˙
Student: Ilbey
Karakurt (Fall 2014)
(2) Modeling of motion of spermatozoa in a microchannel
Student: Berkcan Kapusuzo˘glu (Spring 2014)
(3) Design of a microfluidic chip for serum separation from whole blood
Student: A. Resul Al (Spring 2013)
C
¸ etin–Curriculum Vitae (October 2014)
5
Miscallenous Projects:
(1) Design of a microfluidic chamber for the determination of DEP spectra of bio-particles
¨ ci
Student: Ece Ozel¸
Date: Summer 2014
(2) Design of micro-chamber for polymerase chain reactor
Collaborator: Dr. Yalın Kılı¸c
Student: Hatice Dilara Uslu, Umut C
¸ al¸skan
Date: Summer 2014
(3) Experimental determination of thermal characteristic of flow in a microtube
Collaborator: Dr. Kevin Cole (Uni. Nebraska, ME)
Student: Kubilay Kaan Bah¸ceci
Date: Summer 2014
(4) Modeling of cooling characteristics of vacuum chamber for brazing process
Collaborator: Dr. Zafer Durusoy (NANOVAK Inc. Co.)
Student: Onur Kaan Karao˘glu
Date: Summer 2014
(5) Design of fluidic chamber for the treatment of zebra fish for genetic research
Collaborator: Dr. Ay¸ca Birg¨
ul (Bilkent University-MBG)
Student: Engin Kırıcı, Cem Kurt, Yi˘git Oskay
Date: Summer 2013-Summer 2014
(6) Design of a solar powered golf-cart to be used on METU–NCC campus (Design phase was
completed under my supervision)
Short Description: A group of about 25 METU–NCC students from Mechanical and Electrical & Electronics Engineering program worked on this project. The budget of the first
phase of the project was 8,000 TL (approx. 3000 Euro), and the first phase was completed
under my supervision.
Date: January 2010 – June 2011
PUBLICATIONS
h-index: 9 in Google Scholar, 7 in Web of Science
Book Chapters:
Eight entries for Encyclopedia of Micro and Nanofluidics, 2nd Ed.
(Springer, 2014, ISBN: 978-3-642-27758-0)
[1] B. C
¸ etin∗ , B. Barano˘glu, Boundary-Element Method in Microfluidics
(Available online, DOI: 10.1007/978-3-642-27758-0 121-6)
[2] B. C
¸ etin∗ , S. Zeinali, D. Li, Magnetic Pumps
(Available online, DOI: 10.1007/978-3-642-27758-0 843-6)
¨
[3] S. B¨
uy¨
ukko¸cak, M. B. Ozer,
B. C
¸ etin∗ , Microscale Acoustofluidics
(Available online, DOI: 10.1007/978-3-642-27758-0 1735-4)
[4] B. C
¸ etin∗ , S. Zeinali, D. Li, Microfluidic Optical Devices
(Available online, DOI: 10.1007/978-3-642-27758-0 121-6)
[5] B. C
¸ etin∗ , R. Salemmilani, D. Li, Microfluidic Rotary Pump
(Available online, DOI: 10.1007/978-3-642-27758-0 944-7)
[6] B. C
¸ etin∗ , S. Taze, D. Li, Methods for Pressure Measurements
(Available online, DOI: 10.1007/978-3-642-27758-0 1296-7)
[7] B. C
¸ etin∗ , R. Salemmilani, D. Li, Ultrasonic pumps
(Available online, DOI: 10.1007/978-3-642-27758-0 1646-8)
[8] B. C
¸ etin∗ , D. Li, Temperature Gradient Generation and Control
(Available online, DOI: 10.1007/978-3-642-27758-0 1534-2)
C
¸ etin–Curriculum Vitae (October 2014)
6
Six entries for Encyclopedia of Micro and Nanofluidics, 1st Ed.
(Springer, 2008, ISBN: 978-0-387-49000-7)
[1] B. C
¸ etin∗ , D. Li, Magnetic Pumps (pp. 1040–1043)
[2] B. C
¸ etin∗ , D. Li, Microfluidic Optical Devices (pp. 1186–1187)
[3] B. C
¸ etin∗ , D. Li, Methods for Pressure Measurements (pp. 1743–1745)
[4] B. C
¸ etin∗ , D. Li, Temperature Gradient Generation and Control (pp. 1993–1994)
[5] B. C
¸ etin∗ , D. Li, Microfluidic Rotary Pump (pp. 1188–1189)
[6] B. C
¸ etin∗ , D. Li, Ultrasonic Pumps (pp. 2128–2129)
∗
Corresponding author
In-progress
(1) K. G. G¨
uler, B. C
¸ etin, M. H. Aksel, Computational modeling of fin-and-tube type vehicle
radiators based on porous medium approach, Revision Submitted to Appl. Therm. Eng.
(2) B. C
¸ etin, S. B. C
¸ elik, C. Sert, Analysis of heat transfer in slip-flow regime by parallel
implementation of Lattice-Boltzmann method on GPUs, Submitted to Thermal Science
(3) B. C
¸ etin, S. Zeinali, S. N. B. Oliaei, Y. Karpat, Fabrication of microfluidics device with 3D
electrode structures for high throughput DEP applications using high precision machining,
In preparation to be submitted to Electrophoresis, Special Issue on Dielectrophoresis
¨ Ye¸sil-C
(4) C. Yavuz, B. C
¸ etin, O.
¸ elikta¸s, Supercritical CO2 sterilization of PMMA microfluidic chips and investigation of material characteristics, Submitted to J. Supercritical
Fluids
Journal Papers
¨
[18] B. C
¸ etin∗ , M. B. Ozer,
M. Solmaz, Microfluidic bio-particle manipulation for biotechnology, Biochem. Eng. J., 2014, (Available online, DOI: 10.1016/j.bej.2014.07.013)
(Impact factor: 2.37)
[17] B. C
¸ etin∗ , S. Zeinali, Analysis of heat transfer for a low Peclet number microtube flow
using second-order slip model: An extended–Graetz problem, J. Eng. Math., 2014,
(Available online, DOI: 10.1007/s10665-014-9704-7)
(Impact factor: 1.07)
¨
[16] S. B¨
uy¨
ukko¸cak, M. B. Ozer,
B. C
¸ etin∗ , Numerical modeling of acoustophoretic particle
separation for microfluidics, Microfluid. Nanofluid., 2014, (Available online, DOI:
10.1007/s10404-014-1398-7)
(Impact factor: 2.67)
[15] K. Cole∗ , B. C
¸ etin, L. Brettmann, Microchannel heat transfer with slip flow and wall
effects, AIAA J. Thermophys. Heat Tr., 28 (3), 2014, 455–462
(Impact factor: 0.88)
[14] B. C
¸ etin∗ , M. Asik, S. Taze, Design and Fabrication of a microfluidic device for synthesis
of chitosan nanoparticles, ASME J. Nanotech. Eng. Medicine, 4 (3), 2014, 031004
[13] B. C
¸ etin, Effect of thermal creep on heat transfer for a 2D microchannel flow: An
analytical approach, 2013, Special Issue on Microchannel Heat Transfer, J. Heat Trans.T. ASME, 135 (10), 2013, 101007
(Impact factor: 1.83)
C
¸ etin–Curriculum Vitae (October 2014)
7
[12] B. C
¸ etin∗ , D. Li, Dielectrophoresis in Microfluidics Technology, Invited paper to the
Special Issue on Dielectrophoresis, Electrophoresis, 32, 2011, 2410–2427
(Impact factor: 3.16, Citation: 17)
[11] K. Cole∗ , B. C
¸ etin, The effect of axial conduction on heat transfer in a liquid microchannel flow, Int. J. Heat Mass Trans., 54, 2011, 2542–2549
(Impact factor: 2.52, Citation: 2)
¨ Bayer, Evaluation of Nusselt number for a flow in a microtube using
[10] B. C
¸ etin∗ , O.
second–order slip model, Therm. Sci., 15 (Suppl. 1), 2011, 103–109
(Impact factor: 1.45, Citation: 1)
[9] B. C
¸ etin∗ , D. Li, Lab-on-a-chip device for continuous particle and cell separation based
on electrical properties via AC-dielectrophoresis, Electrophoresis, 31, 2010, 3035–3043
(Impact factor: 3.16, Citation: 9)
[8] B. C
¸ etin∗ , D. Li, Continuous particle separation based on electrical properties using
AC-DEP, Electrophoresis, 30, 2009, 3124–3133
(Impact factor: 3.16, Citation: 2)
[7] B. C
¸ etin∗ , Y. Kang, Z. Wu, D. Li, Continuous Particle Separation by Size via AC-DEP
Using a Lab-on-a-Chip Device with 3D electrodes, Electrophoresis, 30, 2009, 766–772
(Impact factor: 3.16, Citation: 18)
[6] Y. Kang∗ , B. C
¸ etin, Z. Wu, D. Li, Continuous Particle Separation With Localized ACDEP Using Embedded Electrodes and an Insulating Hurdle, Electrochim. Acta, 54,
2009, 1715–1720
(Impact factor: 4.09, Citation: 44)
[5] B. C
¸ etin∗ , A. G. Yazıcıo˘glu, S. Kaka¸c, Slip-Flow Heat Transfer in Microtubes with Axial
Conduction and Viscous Dissipation–An Extended Graetz Problem, Int. J. Thermal
Sciences, 48, 2009, 1673–1678
(Impact factor: 2.56, Citation: 10)
[4] B. C
¸ etin∗ , B.E. Travis, D. Li, Analysis of the electro-viscous effects on pressure-driven
liquid flow in a two-section heterogeneous microchannel, Electrochim. Acta, 54, 2008,
660–664
(Impact factor: 4.09, Citation: 1)
[3] B. C
¸ etin∗ , D. Li, Effect of Joule Heating on Electrokinetic Transport, Electrophoresis,
29 (5), 2008, 994–1005
(Impact factor: 3.16, Citation: 21)
[2] B. C
¸ etin∗ , A. G. Yazıcıo˘glu, S. Kaka¸c, Fluid Flow in Microtubes with Axial Conduction
Including Rarefaction and Viscous Dissipation, Int. Commun. Heat Mass, 35, 2008,
535–544
(Impact factor: 2.12, Citation: 17)
unc¨
u, S. Kaka¸c, Gaseous Flow in Microconduits with Viscous Dissipation,
[1] B. C
¸ etin∗ , H. Y¨
Int. J. Transport Phenomena, 8 (4), 2006, 297–315
∗
Corresponding author
International Proceedings
[14] B. Barano˘
glu, B. C
¸ etin∗ , A particle flow specific boundary element formulation for
microfluidic applications, 4th Micro and Nano Flows Conference, September 7–10,
2014, University College London, UK
[13] B. C
¸ etin∗ , S. Zeinali, Modeling of on-chip (bio)particle separation and counting using
3D electrode structures, 4th Micro and Nano Flows Conference, September 7–10,
2014, University College London, UK
C
¸ etin–Curriculum Vitae (October 2014)
8
¨ ∗ , B. C
[12] S. B¨
uy¨
ukko¸cak, M. B. Ozer
¸ etin, Finite element modeling of micro-particle manipulation using ultrasonic standing waves, ASME 12th International Conference
on Nanochannels, Microchannels and Minichannels, August 3-7, 2013, Chicago,
IL, USA
¨
[11] B. C
¸ etin∗ , M. B. Ozer,
S. Zeinali, S. B¨
uy¨
ukko¸cak, Fabrication of microfluidic devices for
dielectrophoretic and acoustophoretic applications using high-precision machining, 16th
Int. Conference on Machine Design and Production (UMTIK-2014), June 30 July 3, Izmir, Turkey
˙ Karakurt∗ , B. C
[10] I.
¸ etin, Multiphysics simulation of microfluidic reactor for polymerase
chain reaction, International Symposium on Convective Heat and Mass Transfer
(CONV–14), June 8-13, 2014, Ku¸sadası, Aydın, Turkey
[9] K. G. G¨
uler∗ , B. C
¸ etin, M. H. Aksel, Simulation of thermal characteristics of radiators
using a porous model, International Symposium on Convective Heat and Mass
Transfer (CONV–14), June 8-13, 2014, Ku¸sadası, Aydın, Turkey
¨
[8] B. C
¸ etin∗ , S. B¨
uy¨
ukko¸cak, S. Zeinali, B. Ozer,
Simulation of an integrated microfluidics
device for bioparticle wash, separation and concentration, ASME 4th Micro/Nanoscale
Heat & Mass Transfer Int. Conf., December 11–14, 2013, Hong Kong, China
[7] B. C
¸ etin∗ , R. Salemmilani, Spiral microfluidic device for continuous flow PCR, ASME
2013 Summer Heat Transfer Conference , July 14–19, 2013, Minneapolis, MN, USA
[6] B. C
¸ etin∗ , S. Taze, M. Asik, A. Tuncel, Microfluidic device for synthesis of chitosan
nanoparticles, ASME 2013 Fluid Engineering Summer Meeting, July 7–11, 2013,
Incline Village, NV, USA
[5] B. C
¸ etin, Evaluation of Nusselt number for a flow in a microtube with second-order
model including thermal creep, 10th International Conference on Nanochannels,
Microchannles and Minichannels (ICNMM 2012), July 8–12, 2012, Puerto Rico,
USA
[4] S. B. C
¸ elik∗ , C. Sert, B. C
¸ etin, Simulation of channel flow by parallel implementation
of thermal Lattice-Boltzmann method on GPUs, 7th International Conference on
Computational Heat and Mass Transfer (ICCHMT 2011), July 18–22, 2011,
Istanbul, Turkey
[3] S. B. C
¸ elik, C. Sert, B. C
¸ etin∗ , Simulation of lid-driven cavity flow by parallel implementation of Lattice-Boltzmann method on GPUs, 2nd International Symposium on
Computing in Science and Engineering (ISCSE’11), June 1–4, 2011, Ku¸sadası,
Aydın, Turkey
¨ Bayer, Evaluation of Nusselt number for a flow in a microtube with
[2] B. C
¸ etin∗ , O.
constant heat flux including axial conduction, viscous dissipation and second-order slip
model, The 3rd International Symposium on Nonlinear Dynamics (ISND 2010),
September 25–28, 2010, Shanghai, China
[1] B. C
¸ etin∗ , D. Li, Microfluidic continuous particle separation via AC-DEP with 3-D
electrodes, ASME Int. Mech. Eng. Cong. Expo. (IMECE’08), October 31–
November 6, 2008, Boston, MA, USA
∗
Presenting author
National Proceedings
[11] E. C
¸ a˘
gatay∗ , F. Altınok, B. C
¸ etin, Analysis of gas power cycyles and Brayton refrigeration cycles using MATLAB, Proc. 19th National Conference on Thermal Sciences,
September 9–12, 2013, Samsun, Turkey, 983–990
C
¸ etin–Curriculum Vitae (October 2014)
9
[10] S. Pulyaev, O. Akg¨oz∗ , B. C
¸ etin, Recovery of the waste heat by organic Rankine cycle
in power plants, Proc. 19th National Conference on Thermal Sciences, September
9–12, 2013, Samsun, Turkey, 978–982
[9] B. Barano˘
glu∗ , B. C
¸ etin, Simulation of particle motion in a microchannel using Boundary
Element Method, 19th National Mechanics Conference, August 26–30, 2013, Manisa,
Turkey
[8] Y. G¨
urol, S. B. C
¸ elik, B. C
¸ etin∗ , Simulation of 2D electro-osmotic flow inside microchannels using Lattice-Boltzmann method on GPUs, Proc. 18th National Conference
on Thermal Sciences, September 7–10, 2011, Zonguldak, Turkey, 45–50
[7] K. G. G¨
uler, B. C
¸ etin∗ , Simulation of Electrokinetic Manipulation of Particle inside
Microchannels, Proc. 18th National Conference on Thermal Sciences, September
7–10, 2011, Zonguldak, Turkey, 39–44
¨ urk, B. C
[6] S. Taze, Y. Ozt¨
¸ etin∗ , Viscous Flow Calculations for Undergraduate Fluid
Mechanics Education using MATLAB, Proc. 18th National Conference on Thermal
Sciences, September 7–10, 2011, Zonguldak, Turkey, 829–833
¸ etin, A. G. Yazıcıo˘glu, H. Y¨
unc¨
u, S. Kaka¸c, Finite Element analysis of
[5] B. Bulut∗ , B. C
gaseous flow in microchannels with axial conduction, Proc. 17th National Conference
on Thermal Sciences, June 24–27, 2009, Sivas, Turkey, 308–314
[4] B. C
¸ etin∗ , D. Li, Modeling and Simulation of 2D, EOF in a Slit Channel with Joule
Heating Effect, Proc. 16th National Conference on Thermal Sciences, May 30June 2, 2007, Kayseri, Turkey, 985–991
[3] B. Bulut∗ , B. C
¸ etin, A. G. Yazıcıo˘glu, H. Y¨
unc¨
u, S. Kaka¸c, The Analysis of the Effect of
Axial Conduction on Single-Phase Convective Heat Transfer in Microtubes, Proc. 16th
National Conference on Thermal Sciences, May 30-June 2, 2007, Kayseri, Turkey,
914–921
[2] B. C
¸ etin∗ , H. Y¨
unc¨
u, S. Kaka¸c, Single-Phase Convective Heat Transfer in Microtubes,
Proc. 15th National Conference on Thermal Sciences, September, 7-9, 2005,
Trabzon, Turkey, 349–356
¨ Bayer∗ , B. C
[1] O.
¸ etin, E. Dirgin, COP-Irreversibility Relation in Household Refrigerators, Proc. 14th National Conference on Thermal Sciences, September, 3-5, 2003
Isparta, Turkey, 486–491
∗
Presenting author
Presentations and Invited Talks
[16] B. C
¸ etin, Microfluidic bio-particle manipulation, Workshop on Detection of Pathogenic
Microorganism: Probes, Platforms, and Detectors, August 29-30, 2014, NanoBacterhageSERS 2014, August 27–29, 2014, K¨oyce˘giz, Turkey
[15] B. C
¸ etin, Machining-based fabrication of microfluidic devices for biotechnology, NanoBioTech 2014, August 27–29, 2014, K¨oyce˘giz, Turkey
[14] B. Baranoglu, B. C
¸ etin, Parallel implementation of 2-D boundary element formulation
for a microfluidic particulate flow, 11th World Congress on Computational Mechanics / 6th European Conference on Computational Fluid Dynamics, July 20-25,
2014, Barcelona, Spain
[13] B. C
¸ etin, Microfluidic Bio-particle Manipulation, Novel Fluidic Technologies and
Applications with an Emphasis on Collaboration Workshop, April 21-22, 2014,
˙
Izmir,
Turkey
˙
[12] B. C
¸ etin, Microfluidics and Lab-on-a-chip Technology, Izmir
Institute of Technology,
˙
Mechanical Engineering Department, January 20, 2014, Izmir,
Turkey
C
¸ etin–Curriculum Vitae (October 2014)
10
[11] B. C
¸ etin, Microfluidics and Lab-on-a-chip Technology for Biomedical Applications,
˙
¨ ITAK
˙
˙
TUB
BILGEM,
January 6, 2014, Istanbul,
Turkey
[10] B. C
¸ etin, S. B. C
¸ elik, C. Sert, Analysis of heat transfer in slip-flow regime by parallel
implementation of Lattice-Boltzmann method on GPUs, ASME 4th Micro/Nanoscale
Heat & Mass Transfer Int. Conf., December 11–14, 2013, Hong Kong, China
[9] B. C
¸ etin, Microfluidics and Lab-on-a-chip Technology for Biomedical Applications,
Hacettepe Univeristy, Institute of Graduate Studies, Bioengineering Division,
December 5, 2013, Ankara, Turkey
[8] B. C
¸ etin, Microfluidics and Lab-on-a-chip Technology for Biomedical Applications, S
¸ i¸sli
˙
Memorial Hospital, December 3, 2013, Istanbul,
Turkey
[7] B. C
¸ etin, Microfluidics and Lab-on-a-chip Technology for Bioengineering: Applications
and Challenges, VI. Bioengineering Congress ”Human Welfare” (BEC2013),
November 12–15, 2013, Ku¸sadası, Aydın, Turkey
[6] B. C
¸ etin, Microfluidics and Lab-on-a-chip Technology for Biomedical Applications, Ege
˙
University Food Engineering Department, April 4, 2013, Izmir,
Turkey
[5] B. C
¸ etin, Microfluidics and Lab-on-a-chip Technology, Innovation and Collaboration
in Engineering Research (INCER’2012), July 2–4, 2012, Bucharest, Romania
[4] B. C
¸ etin, Dielectrophoresis in Microfluidics Technology & Novel Fabrication Strategies
for DEP-based Microuidic Platforms, Bilkent University National Nanotechnology
Research Center, January 6, 2012, Ankara, Turkey
[3] B. C
¸ etin, D. Li, Lab-on-a-chip device for continuous particle and cell separation based
on electrical properties via AC-dielectrophoresis, 17th International Symposium on
Capillary Electroseperation Techniques (ITP 2010), August 29-September 1, 2010,
Baltimore, MD, USA
[2] B. C
¸ etin, Microuidic Continuous Separation of Particles and Cells by AC-DEP,
NATO Advanced Study Institute Summer School on Microsystems for Security–
˙
Fundamentals and Applications, August 23–September 4, 2009, C
¸ esme, Izmir,
Turkey
[1] B. C
¸ etin, H. Y¨
unc¨
u, S. Kaka¸c, Single-Phase Convective Heat Transfer in Microchannels,
NATO Advanced Study Institute Summer School on Microscale Heat TransferFundamentals and Applications in Biological and Micro-Electro-Mechanical Systems, July
˙
18–30, 2004, C
¸ esme, Izmir,
Turkey
ACADEMIC
SERVICES
Invited Journal Referee
• Electrophoresis (2010(5), 2011(2), 2012(3), 2013, 2014(3))
• Microfluidics and Nanofluidics (2009, 2010(2), 2011, 2012)
• Lab-on-a-Chip (2011, 2013)
• ASME Journal of Heat Transfer (2012, 2013(3), 2014(2))
• ASME Journal of Fluids Engineering (2014(2))
• Applied Mathematical Modeling (2013)
• Physical Chemistry Chemical Physics (2013)
• International Journal of Heat and Mass Transfer (2009, 2010, 2012, 2014)
• Journal of Thermal Science and Technology (2011, 2012, 2013)
• Experimental Thermal and Fluid Science (2014)
• Bioprocess and Biosystems Engineering (2012)
• Review of Scientific Instrument (2012)
• Applied Physics Letter (2011)
C
¸ etin–Curriculum Vitae (October 2014)
11
• Separation Science and Technology (2010)
• Analyst (2010)
• Chemical Engineering Technology (2010)
• Chemical Engineering Communications (2010)
• Chinese Journal of Aeronautics (2010)
• Heat Transfer Engineering (2010)
• Journal of Zhejiang University - Science A (2010)
• Applications and Applied Mathematics (2010)
Conference Referee
• 4th Micro and Nano Flows (2014)
• ASME-FEDSM (2014)
• National Conference on Thermal Sciences (2013)
• GASMEMS (2012)
Other Refereeing
¨ ITAK
˙
• TUB
ARDEB Referee (2013)
¨
˙
• TUBITAK ARDEB External Consultant (2013(2), 2014(3))
¨ ITAK
˙
• TUB
TEYDEB Referee (2012, 2014(5))
˙
• Scientific Research Project Referee, Istanbul
Technical University (2014)
˙
• Scientific Research Project Referee, Izmir Institute of Technology (2014)
• Grant Reviewer, Netherlands Organisation for Scientific Research (2011)
Thesis and Qualification Examination
• M.S. Thesis (METU-Dept. Mech. Eng., 2012, 2013, 2014)
• Ph.D. Qualification Exam
– BilMECH (2012)
– METU-Dept. Mech. Eng. (2012, 2013(2), 2014)
• Ph.D. Thesis Supervising Committee (METU-Dept. Mech. Eng., 2012, 2013(2), 2014(2))
• Ph.D. Thesis Committee (METU-Dept. Mech. Eng., 2013(2), 2014)
ACADEMIC &
PROFESSIONAL
ACTIVITIES
Supervisor of the Bilkent University Microfluidics & Lab-on-a-chip Research Group,
September 2011–Present
Academic advisor of the Bilkent University Mechanical Engineering Society, January
2013 – Present
Coordinator of the BilMECH Departmental Seminar Series organized each semester, Fall
2012, Spring 2013.
Participated in 11th World Congress on Computational Mechanics / 6th European
Conference on Computational Fluid Dynamics, July 20-25, 2014, Barcelona, Spain
Participated in 16th Int. Conference on Machine Design and Production (UMTIK2014), June 30 - July 3, Izmir, Turkey
C
¸ etin–Curriculum Vitae (October 2014)
12
Participated in International Symposium on Convective Heat and Mass Transfer
(CONV–14), June 8-13, 2014, Ku¸sadası, Aydın, Turkey
Participated in Novel Fluidic Technologies and Applications with an Emphasis on
Collaboration Workshop organized by Ege University, Bioengineering Department as an
˙
invited speaker, April 21-22, 2014, Izmir,
Turkey
Participated in ASME 4th Micro/Nanoscale Heat & Mass Transfer Int. Conf., December
11–14, 2013, Hong Kong, China
Invited speaker in VI. Bioengineering Congress ”Human Welfare” (BEC2013), November
12–15, 2013, Ku¸sadası, Aydın, Turkey
Participated in ASME 2013 Summer Heat Transfer Conference , July 14–19, 2013,
Minneapolis, MN, USA
Participated in ASME 2013 Fluid Engineering Summer Meeting, July 7–11, 2013, Incline
Village, NV, USA
Consultant for the company YETSAN Oto Kal. ve Rad. San. Tic. A.S
¸ . on the
¨ ITAK
˙
TUB
Project (Project No: 7130643) ”Computer-aided and experimental design, optimization and development of the prototype of on-vehicle radiator systems (Ara¸c u
¨st¨
u uygulamalar i¸cin radyat¨
or sistemlerin performanslarnn bilgisayar destekli ve deneysel olarak tasarımı,
optimizasyonu ve prototipin geli¸stirilmesi)”, June 2013–February 2014
Consultant for the company Tekno Tasarım M¨
uhendislik Danı¸smanlık San. Tic. A.S
¸.
¨ ITAK
˙
on the TUB
Project (Project No: 3120319) ”Development of battery management
system to be used on vehicles (Ta¸sıtlarda kullanılacak batarya y¨onetim sistemi geli¸stirilmesi)”,
October 2012–March 2013
Participated in 10th International Conference on Nanochannels, Microchannles and
Minichannels (ICNMM’2012), July 8–12, 2012, Puerto Rico, USA
Participated in Innovation and Collaboration in Engineering Research (INCER’2012),
July 2–4, 2012, Bucharest, Romania
Participated in 18th National Conference on Thermal Sciences, September 7-10, 2011,
Zonguldak, Turkey
Supervisor of the METU–NCC Microfluidics & Lab-on-a-chip Research Group, January 2010–July2011
Supervisor of the METU–NCC solar powered golf-cart project together with a faculty
member from EE department with a budget of 8000TL, December 2009–July2011
Academic visit to Old Dominion University Bio-Microfluidics Lab supervised by Battern
Professor of Computational Engineering Dr. Ali Beskok, Norfolk, VA, USA, August 2010
Participated in NATO Advanced Study Institute Summer School on Microsystems for
˙
Security–Fundamentals and Applications, August 23–September 4, 2009, C
¸ esme, Izmir,
Turkey
Participated in 15th International Biomedical Science and Technology Symposium
(BIOMED 2009), August 16–19, 2009, METU–NCC, G¨
uzelyurt, TRNC Mersin 10, Turkey
C
¸ etin–Curriculum Vitae (October 2014)
13
Participated in ASME International Mechanical Engineering Congress and Exposition, IMECE’08, October 31-November 6, 2008, Boston, MA, USA
Participated in Vanderbilt University Grant and Fellowship Writing Workshop, September, 20, 2008, Nashville, TN, USA
Participated in 16th National Conference on Thermal Sciences, May 30-June 2, 2007,
Kayseri, Turkey
Being the researcher in the project, titled S¨
urekli ve Ge¸ci¸ci Rejimde Mikro Kanallarda Konveksiyonla Isı Transferi (Steady-state and transient Convective Heat Transfer in Microchannels), by
The Scientific and Technological Research Council of Turkey (Project No: 106M076),
June 2006-September 2008
Participated in 15th National Conference on Thermal Sciences, September, 7-9, 2005
Trabzon, Turkey
R
Seminar, Anova CAE, METU, Ankara, Turkey, March 2005
Participated in Fluent
Participated in NATO Advanced Study Institute Summer School on Microscale Heat
Transfer- Fundamentals and Applications in Biological and Micro-Electro-Mechanical Systems,
˙
July 18–30, 2004, C
¸ esme, Izmir,
Turkey
Participated in 14th National Conference on Thermal Sciences, September, 3–5, 2003,
Isparta, Turkey
Participated in NATO Advanced Study Institute Summer School on Emerging Technologies and Techniques in Porous Media, June, 9-20 2003, Neptun-Olympia, Romania
Worked on a design of an autonomous vehicle for ME 407 Mechanical Engineering Design Project (METU) and on a complete design of the condenser and evaporator of a solar
absorption cycle for ME 421 Heat Exchanger Design (METU)
NON–ACADEMIC Participated in VII. International Master’s Swimming Republic Cup, October 27-29,
HONORS AND
2013, Ankara, Turkey: 50m Butterfly (C2, 2nd place), 100m Butterfly (C2, 2nd place), 400m
ACTIVITIES
Freestyle (C2, 1st place), 4 × 50m Freestyle (R2, 3rd place), 4 × 50m Midley (R1, 3rd place)
Participated in Marmaris Open-water Swimming, June 10, 2013, Marmaris, Turkey:
2500m (C2, 2nd place)
Participated in Turkish Master’s Spring Cup Swimming Championship, June 8-9, 2013,
Marmaris, Turkey: 50m Butterfly (C2, 2nd place), 100m Butterfly (C2, 2nd place), 100m Individual Medley (C2, 3rd place), 4 × 50m Freestyle (R2, 2nd place), 4 × 50m Freestyle (combined)
(R2, 2nd place)
Member of APEYK Master’s Swimming Team (March 2013–Present)
Second place in the TRNC University Basketball Championship as a head coach of the
METU–NCC Men’s Basketball Team, May 2011
Second place in the 2nd Basketball Tournament in the memory of Koray Bekiro˘
glu
organized by Lefke European University as a head coach of the METU–NCC Men’s Basketball
C
¸ etin–Curriculum Vitae (October 2014)
14
Team, April 2011
Coach of the METU–NCC Men’s Basketball Team (November 2010–June 2011)
Second place in METU–NCC Streetball Tournament as a member of team ”Slow-break”,
October 2010
Player of the Soyer Sports Club (www.soyerspor.org) competing in National Northern
Cyprus Basketball League (October 2009–October 2010)
METU–NCC Streetball Tournament champion as a member of team ”Slow-break”, October 2009
President of the Turkish Friendship Association (TFA) (www.turkishfriendship.org),
Nashville, TN, USA (January 2008–June 2008)
Board member of TFA, Nashville, TN, USA (November 2007–June 2008)
Board member of the Vanderbilt University Turkish Students Association (TSA)
(http://studentorgs.vanderbilt.edu/tsa), Nashville, TN, USA (September 2007–May 2008)
Being the leader of the organization team for the Turkish Night 2008 (organized by TFA and
TSA) which hosted 300 guests with a concert by worldwide known band Omar Faruk Tekbilek
& His Ensemble (April 2008)
Participated in International Asia-to-Europe Swimming Marathon, Istanbul, Turkey in
1999 (2nd place), 2002 (3rd place) and 2006 (2nd place)
Participated in International Europe-to-Asia Swimming Marathon, C
¸ anakkale, Turkey
in 2004 (4th place)
Academic advisor of the METU swimming team during September 2002–June 2006
METU Streetball Tournament champion as a member of team ”Bodyguards”, May 2005
Volunteering as a Math and Science tutor to underprivileged elementary and high school children between 2001 and 2003, in the Voluntary Education Project, organized by METU Communication Club, and being the project leader of the same project between September 2002
and June 2003
3th place for 200m IM and 4x200m Freestyle in the National University Swimming Championship in 2002
Member of the METU University Waterpolo Team, 2002
Member of the METU Swimming Team, 1998, 1999, 2002
Member of the METU Waterpolo Team competing in National Waterpolo League (October
1997–May 1998)
National Swimming Champion for 1500m Freestyle (Age 16/17) in 1996
C
¸ etin–Curriculum Vitae (October 2014)
15
Download

Barbaros C¸etin, Ph.D. - Mechanical Engineering