LECTURES
MONDAY, 27.10.2014
8.45
OPENING CEREMONY
PM STEELS - INVITED LECTURES
9.00
9.30
10.00
10.30
11.00
11.30
12.00
12.30
AN ANALYSIS OF SOME FACTORS INFLUENCING THE TOUGHNESS OF POROUS SINTERED
MATERIALS
John Robert Moon, Alberto Molinari
EFFECT OF PHOSPHORUS ADDITION ON THE IMPACT FRACTURE BEHAVIOUR OF Cr-Mo
PREALLOYED SINTERED STEELS
Herbert Danninger, Christian Gierl-Mayer, Maryam Jaliliziyaeian
APPLICATION OF FRACTOGRAPHY FOR INVESTIGATION OF SURFACE OXIDE
REDUCTION/TRANSFORMATION AND INTER-PARTICLE NECKS FORMATION DURING SINTERING
OF PREALLOYED WITH Cr AND Mn PM STEELS
Eduard Hryha
Coffee break
A CONSERVATIVE APPROACH TO PREDICT THE CONTACT FATIGUE BEHAVIOR OF SINTERED
STEELS
Alberto Molinari, Ibrahim Metinöz, Ilaria Cristofolini
FATIGUE CONSIDERATION ON PM APPLICATIONS
Sigurd Berg
ARMORED ELEMENTS BY MEANS OF POWDER METALLURGY: APPLIED STRESSES, FRACTURE
MECHANISMS AND SURFACES
Michele Maccarini, Marco Actis Grande, Robert Bidulsky
Lunch
PM STEELS
14.00
14.20
14.40
15.00
15.20
15.40
16.10
16.30
16.50
17.10
17.30
INVESTIGATION OF LOW TEMPERATURE CREEP BEHAVIOUR OF PM-STEELS
Maheswaran Vattur Sundaram, Henrik Karlsson, Kumar Babu Surreddi, Eduard Hryha, Michael Andersson, Gunnar
Åkerström, Lars Nyborg
IMPACT BEHAVIOUR OF SINTERED STEELS PREPARED FROM Mn PREALLOYED POWDERS
Christian Gierl-Mayer, Maryam Jaliliziyaeian, Herbert Danninger, Eva Dudrová
ANALYSIS OF OXIDE TRANSFORMATION DURING SINTERING OF CHROMIUM ALLOYED PM
STEELS BY XPS
Maheswaran Vattur Sundaram, Eduard Hryha, Lars Nyborg
COMBINED HIGH TEMPERATURE VACUUM SINTERING AND LOW PRESSURE CARBURIZING OF PM
STEELS FOR HIGH PERFORMANCE APPLICATIONS
Dimitris Chasoglou
SINTER-HARDENING RESPONSE OF SINTERED STEEL BASED ON ASTALOY Mo AND ITS DIFFUSION
BONDED DERIVATIVES
Seshendra Karamchedu, Sepehr Hatami, Lars Nyborg, Michael Andersson
Coffee break
PREDICTION, FORMATION AND ANALYSIS OF MICROSTRUCTURE OF HIGH CHROMIUM-ALLOYED
PM STAINLESS STEEL SINTERED IN DIFFERENT ATMOSPHERES
Ruslan Shvab, Eduard Hryha, Petro Shykula, Ola Bergman, Eva Dudrová, Sven Bengtsson
ANALYTICS OF PM-STEELS CONTAINING BORON WITH LASER ABLATION-ICP-ANALYTICS
Christian Gierl-Mayer, Viktor Bauer, Andreas Limbeck, Herbert Danninger
THE EFFECT OF HEAT TREATMENT ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES
OF SINTERED Fe-2Cu-1.5Mo-0.5C AND Fe-0.2Mo-0.8Mn-1.5Cr-1.5Ni-0.4C STEELS
Ch. Fiał, Eva Dudrová, Margita Kabátová, Miriam Kupková, Marcela Selecká, Maciek Sulowski, Andrzej Cias
INTERPRETATION OF FRACTURE MECHANISMS AND FAILURE IN SINTERED STEELS
Eva Dudrová, Margita Kabátová
POSTER SESSION
Dinner
TUESDAY, 28.10.2014
8.30
Trip to “Skalnaté pleso (tarn)“ and Astronomical and Meteorological Observatory
13.00
Lunch
CERAMICS, NON FERROUS MATERIALS AND COMPOSITES
14.00
NANOSTRUCTURED CERAMICS IN BAY ATI: STRUCTURE AND PROPERTIES (INVITED LECTURE)
Csaba Balázsi
14.30
15.00
15.20
NANO-INDENTATION AND MICROPILLAR TESTING OF WC GRAINS IN WC – Co (INVITED LECTURE)
Ján Dusza
MECHANICAL AND TRIBOLOGICAL PROPERTIES OF hBN/Si3N4 CERAMICS COMPOSITES
Alexandra Kovalčíková, Ján Balko, Csaba Balázsi, Pavol Hvizdoš, Ján Dusza
CERAMICS BASED ON ZIRCONIA WITH A LOW SINTERING TEMPERATURE
Valeriy V. Smirnov, Sergey V. Smirnov, A. I. Krylov, Olga S. Antonova, Margarita A. Goldberg, L. I. Shvorneva, D. D.
Titov, Ľubomír Medvecký, Alexander Baikin, Sergey M. Barinov
15.40
16.10
Coffee break
16.40
EFFECT OF STRAIN LOCALIZATION ON FRACTURE BEHAVIOR FATIGUED GAMMA TiAl-2Nb ALLOY
Martin Petrenec, Jaroslav Polák, Jiří Dluhoš, Jiří Tobiáš
TESTING PM MATERIALS – CASE STUDIES
Tamas Joszef Leitner, Territory Sales Engineer Central Europe, Instron Material Testing
Conference dinner
17.00
19.30
EXOTHERMIC REACTION - A USEFUL TOOL FOR SYNTHESIS OF ADVANCED MATERIALS
FROM REACTIVE POWDERS (INVITED LECTURE)
František Simančík
WEDNESDAY, 29.10.2014
CERAMICS, NON FERROUS MATERIALS AND COMPOSITES
9.00
9.50
10.10
ADVANCED MATERIALS FOR MEDICINE (INVITED LECTURE)
Inna Vilorovna Fadeeva, Valeriy S.Komlev, A. N.Gurin, Alexander S. Fomin, Sergey M. Barinov
THE INFLUENCE OF HIGH TEMPERATURE ON THE MICROSTRUCTURE PROPERTIES OF Ni-BASED
SUPERALLOY
Natália Luptaková, Petr Král, Petr Dymáček
Coffee break
FUNCTIONAL COMPOSITES (APVV 0222-10)
10.40
11.10
11.40
12.00
ELECTROCATALYSIS USING NANOPARTICLES SURFACES (INVITED LECTURE)
Renáta Oriňaková, Mária Sabalová, Andrej Oriňák
COMPRESSIVE CREEP TESTING OF MoSi2-SiC NANOCOMPOSITES
Petr Dymáček, Ferdinand Dobeš, Beáta Ballóková
SOFT MAGNETIC COMPOSITE BASE ON FERROMAGNETIC CORE AND NiFe2O4 SHELL
Magdaléna Strečková, Hynek Hadraba, Pavla Roupcová, Radovan Bureš
Mechanical alloying of 80Ni-14.7Fe-4.4Mo-0.5Mn-0.3Si soft magnetic material of Permalloy type
Hynek Hadraba, Magdaléna Strečková, Roman Husák, Pavla Roupcová
12.20
CLOSING CEREMONY
12.30
Lunch
POSTERS
PM STEELS
ANALYSE OF TRIBOLOGICAL PROPERTIES OF MULTI - AND NANOCOMPOSITE COATING APPLIED ON PM
SUBSTRATE
Dagmar Jakubéczyová, Beáta Ballóková
THE EFFECTS OF PROCESSING PARAMETERS ON THE FRACTURE OF Fe-Mn-Cr-Mo-C POWDER
METALLURGY STEELS
Monika Tenerowicz, Maciej Sułowski
A STUDY REGARDING SOME WAYS TO IMPROVE THE MECHANICAL PROPERTIES OF THE SINTERED
MATERIALS MADE FROM POWDERS BASED IRON
Codruţa Pavel, Liviu Brânduşan, Mariana Pop, Gabriel Batin
NON FERROUS MATERIALS
MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NANOCRYSTALLINE DISPERSION
STRENGTHENED COPPER
Katarína Ďurišinová, Juraj Ďurišin, Mária Orolínová, Martin Ďurišin, Juraj Szabó
THERMAL STABILITY OF Cu-Al2O3 AND CuCr MATERIAL
Mária Orolínová, Juraj Ďurišin, Katarína Ďurišinová, Zuzana Danková, Martin Ďurišin, Juraj Szabó
THE ELABORATION AND CHARACTERIZATION OF SOME Cu-Ti FRICTION MATERIALS
Gabriel Batin, Liviu Brânduşan, Cătălin Popa, Ioan Vida-Simiti, Codruța Pavel
THE EFFECT OF PARTICLES OXIDE COATING AND GRAPHITE ADDITIONAL ON SINTERING BEHAVIOUR
OF PREALLOYED Cu-10Sn BRONZE PARTS
Mahnaz Mehdizadeh Lima, Soghra Yousefli, Mohammad Behnam
THE INFLUENCE OF EQUAL-CHANNEL ANGULAR EXTRUSION ON THE STRUCTURE AND PROPERTIES OF
POWDER MATERIALS
Lyudmila A. Ryabicheva, A. V. Dyadichev
THE OXIDATION BEHAVIOR OF Al AND Al ALLOY GAS-ATOMIZED POWDERS: THE EFFECT OF CHEMICAL
COMPOSITION, PARTICLE SIZE, HEATING ATMOSPHERE AND SIZE OF GREEN COMPACTS SIZE
Matej Štěpánek, Martin Balog, Peter Krížik, František Simančík
OTHER ADVANCED MATERIALS, CERAMICS AND COMPOSITES
STUDIES ON INDUCTION OF CALCIUM PHOSPHATE CRYSTAL GROWTH INTO 1-ASPARTIC AND
GLUTAMIC ACIDS MODIFIED CHITOSAN
Inna Vilorovna Fadeeva, Margarita A. Goldberg, Alexander S. Fomin, Alexander Yurievich Fedotov, Sergey M. Barinov
STUDY OF SINTERING AND MICROSTRUCTURE OF COMPOSITE MATERIALS BASED ON SYSTEM
ZIRCONIA-ALUMINIA CONTAINING FLUORHYDROXYAPATITE
Andrey I. Krilov, Valeriy V. Smirnov, Sergey V. Smirnov, Olga S. Antonova, Margarita A. Goldberg, Anton S. Lysenkov,
Ludmila I. Shvorneva, Ľubomir Medvecký, Juraj Ďurišin, Sergey M. Barinov
INFLUENCE OF SUBSTITUTION OF HYDROXYL-GROUPS BY FLUORINE IONS IN HYDROXYAPATITE FLUORHYDROXYAPATITE SYSTEM ON CRYSTAL MORPHOLOGY
Valeriy V. Smirnov, Olga S. Antonova, Margarita A. Goldberg, Shvorneva L.I., Sergey Mironovich Barinov
COMPOSITE FILMS BASED ON POLYLACTIDE OR ITS BLENDS WITH STARCH WITH CALCIUM
PHOSPHATES AS MATERIALS FOR MEDICAL APPLICATIONS
E. S. Trofimchuk, N. I. Nikonorova, Sergey M. Barinov, Alexander S. Fomin, Ľubomír Medvecký, Inna V. Fadeeva, Margarita A.
Goldberg
POWDERS IN THE MAGNESIUM PHOSPHATE – CALCIUM PHOSPHATE SYSTEM
Margarita A. Goldberg, Valeriy V. Smirnov, Olga S. Antonova, M. R. Kasimova, L. I. Shvorneva, Sergey M. Barinov
CORROSION PROPERTIES OF IRON BASED BIODEGRADABLE FOAMS
Monika Hrubovčáková, Miriam Kupková, Adam Zeleňák, Renáta Oriňáková, Andrea Morovská Turoňová
PM FOAMS MADE OF IRON AND PHOSPHATE-COATED IRON POWDERS. THEIR STRUCTURE AND
BEHAVIOUR UNDER COMPRESSION.
Miriam Kupková, Monika Hrubovčáková, Adam Zeleňák
THE IMPACT OF MICROGRADIENT STRUCTURE ON THE MECHANICAL PROPERTIES OF INVESTIGATED
SYSTEMS
Adam Zeleňák
NANOSTRUCTURED CERAMICS IN BAY ATI: STRUCTURE AND PROPERTIES
Csaba Balázsi
PARTICLE MORPHOLOGY OF PEROVSKITE LANTHANUM TANTALATE PREPARED BY POLYMERIC
COMPLEX SOL-GEL METHOD
Helena Bruncková, Ľubomír Medvecký, Juraj Ďurišin, Pavol Hvizdoš
PREPARATION, MICROSTRUCTURE AND PROPERTIES OF THE SMCs Fe/(0.4-2.6)%SiO2/POLYMER
Margita Kabátová, Eva Dudrová, Ján Füzer, Jana Füzerová, Peter Kollár
NANOINDENTATION ON DIFFERENTLY ORIENTATED WC GRAINS IN WC-Co HARDMATERIAL
Tamas Csanadi, Marek Bľanda, Annamária Duszová, Pavol Hvizdoš, Ján Dusza
PREPARATION OF FERRITIC 17%Cr ODS STEEL BY MECHANICAL ALLOYING FROM PREALLOYED STEEL
POWDER
Hynek Hadraba, Roman Husák, Radovan Bureš, Mária Fáberová
FAILURE MECHANISM OF Cu-Al2O3 MICRO AND NANOMATERIALS OBSERVED BY "IN-SITU TENSILE TEST
IN SEM"
Michal Besterci, Katarína Sülleiová, Beáta Ballóková, Oksana Velgosová, Jozef Ivan
EFFECT OF STATIC PARTNER MATERIAL ON WEAR CHARACTERISTICS OF YTTRIA
STABILIZED ZIRCONIA
Ján Balko, Alexandra Kovalčíková, Pavol Hvizdoš
WEAR DAMAGE OF SILICON NITRIDE/GRAPHENE COMPOSITES
Ján Balko, Pavol Hvizdoš, Csaba Balázsi
EROSION STUDY OF Al2O3 PREFORM/Cu MATRIX COMPOSITE
Štefan Kavecký, Karol Iždinský, Pavol Štefánik, Štefan Nagy
PRESSURELESS REACTION SYNTHESIS OF Ni+Al POWDER MIXTURE IN OXIDE ATMOSPHERE
Pavol Štefánik, Andrej Opálek, Karol Iždinský, Peter Švec Jr.
Download

ZOZNAM PREDNÁŠOK