THERMOLAST® K
GP/LD/b Series – Automotive interior applications,
low density, black
adhesion to PP
very good mechanical properties
meets odour requirements for automotive interior
TYPICAL APPLICATIONS:
• standard applications with soft touch for indoor
(file mats, grips, switch, tracer)
• under the hood applications
(hoses, dampener, air guides)
Hardness
DIN 53505 / ISO 868
Sh A / D
Density
DIN EN ISO 1183-1:2004
g/cm³
Tensile strength
DIN 53504 / ISO 37
N/mm²
Elongatin at break
DIN 53504 / ISO 37
%
Tear resistance
ISO 34-1 mehod B (b)
(Graves) N/mm
TC3COZ
black
35
0.982
5.0
700.0
9.0
16.0
34.0
68.0
TC4COZ
black
45
0.98
6.0
650.0
12.0
17.0
35.0
74.0
TC5COZ
black
55
0.98
6.0
650.0
12.5
22.0
42.0
72.0
black
64
0.98
8.5
650.0
18.0
25.0
46.0
76.0
TC7COZ
black
73
0.982
8.0
580.0
16.5
29.0
50.0
78.0
TC8COZ
black
80
0.986
12.0
620.0
28.0
31.0
58.0
70.0
TC9COZ
black
87
0.985
12.2
670.0
35.0
43.0
62.0
82.0
TC0COZ
black
- / 40
0.98
18.0
580.0
55.0
45.0
65.0
85.0
1
2
2
Colour
72h/
23°C
TC6COZ
1
Compression Set
ISO 815
%
GP/LD/b Series – Automotive interior applications low density, black
22h/
70°C
22h/
100°C
Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
This datasheet is an extract of the KRAIBURG TPE program. Please contact KRAIBURG TPE to select the compound suitable for your
requirements.
Remark:
The information provided in this documentation corresponds to our knowledge on the subject at the date of its publication. This information may
be subject to revision as new knowledge and experience becomes available. The results of our tests are determined by sample check and mean
only a technical description of our products. It shall not absolve the customer of the responsibility to make tests for his intended process or
purpose. Therefore, KRAIBURG TPE makes no warranties and assumes no liability in connection with any use of this information.
© 2010 by KRAIBURG TPE GmbH & Co. KG, 30 March 2010
KRAIBURG TPE GmbH & Co. KG Friedrich-Schmidt-Strasse 2 D-84478 Waldkraiburg GERMANY
subject to change and error
check www.kraiburg-tpe.com for the latest version
21
THERMOLAST® K
GP/LD/b Series – Automotive interior applications,
low density, black
MATERIAL ADVANTAGES:
PROCESSING:
•
•
•
•
• like polyolefines
• processing temperature: 180° C to 220° C
(max. 250° C)
• high injection speed and pressure
very good mechanical properties
very good flow characteristics
adhesion to PP
low density
This datasheet is an extract of the KRAIBURG TPE program. Please contact KRAIBURG TPE to select the compound suitable for your
requirements.
Remark:
The information provided in this documentation corresponds to our knowledge on the subject at the date of its publication. This information may
be subject to revision as new knowledge and experience becomes available. The results of our tests are determined by sample check and mean
only a technical description of our products. It shall not absolve the customer of the responsibility to make tests for his intended process or
purpose. Therefore, KRAIBURG TPE makes no warranties and assumes no liability in connection with any use of this information.
© 2010 by KRAIBURG TPE GmbH & Co. KG, 30 March 2010
KRAIBURG TPE GmbH & Co. KG Friedrich-Schmidt-Strasse 2 D-84478 Waldkraiburg GERMANY
subject to change and error
check www.kraiburg-tpe.com for the latest version
21
Download

THERMOLAST K