Products & Applications
SERVICE
TOOLS
Drive solutions with Optibelt
optibelt SERVICE TOOLS
optibelt TT 3
Frequency tension tester for the universal measurement
of tension of V-belts, timing belts and
ribbed belts
The Optibelt TT 3 frequency tension tester allows
you to optimize your drive’s efficiency and
service life. This further development
of the frequency measuring technique allows
specific drive details to be entered and calculates
the optimum frequency in Hertz [Hz].
optibelt SERVICE TOOLS
optibelt TT 3
Technical data
Range of measurement:
10-600 Hz
Resolution:
< 100 Hz: 0.1 Hz
> 100 Hz: 1.0 Hz
Input values:
belt span length
≤ 10 000 mm
belt weight
< 10 000 g/m
static belt tension
1-60 000 N
Sensor:
acoustic, with electronic
suppression of interfering
noise
Display:
LCD,
2 lines of 16 characters each
Areas of application
• General mechanical engineering
• Utility vehicle/automobile industry
• Agricultural machine engineering
• Household appliances and office equipment
Special advantages
• Optibelt database classification by product groups
• Quick and easy determination of the belt tensioning
• Non-contact measuring with repeatable accuracy
• Large measuring range from 10-600 Hz
• Display in Hertz [Hz] or Newton [N]
• High accuracy of measurement
• Adjustment with Optibelt tension recommendations
• Quality evaluation of the measuring results
• Storage of own data sets possible
• Simple operation
• Universal measuring head for comfortable measuring
• Data communication via PC including software
Power supply – optional:
batteries 2 x 1.5 V
mignon cells (AA)
mains
adaptor2.4 V,
1000 mAh
Temperature range:
+5 °C to +70 °C
Dimensions:
205 x 95 x 40 mm
(without sensor)
Weight:
230 g (not including
batteries/mains adaptor)
optibelt SERVICE TOOLS
optibelt SERVICE KIT
Economic situations are now demanding that belt drives be properly installed and maintained
to ensure that all available cost savings are realized. Large energy savings can be realized as
well as time! All these costs are not usually associated to belt installations or the belt drives
themselves; however using the proper belt effectively, ensures a cost savings many times
the cost of the individual drive components! The total drive cost or cost of ownership
has to be understood in order to evaluate the savings realized by Optibelt products and
the service tools we make available to the market.
The implementation of cost/energy reductions can take place easily and quickly with our
technical devices. These devices are easy to use and operate. The wide range of tools has
been expanded with a new offering that encompasses all installation and
maintenance requirements in one kit! This economically priced
SERVICE KIT contains a variety of technical devices that
optimize the efficiency and operation of existing drives as
well ensuring the proper initial installation on new equipment.
The SERVICE KIT contains the following aids:
• Optibelt Service-Box: a selection of useful aids for quick
help on site
• Optibelt laser pointer II: for correct pulley alignment
• Optibelt Tension Notebox: for the durable documentation
of the tension values on the respective drive
• Optibelt TT mini S frequency tension tester: for the simple measurement of ideal belt tension
optibelt Tension Notebox
While setting the correct drive tension is of
great importance, it is equally important to
be able to repeat the action and achieve
the cost savings into the future and with other
people that may be involved. The proven
Optibelt “Tension Notes” adhesive labels
document the set values for the correct
tension methods. This provides the service
technician at a future date the required
information in a reliable manner without
having to search through documentation
of equipment. These adhesive labels can
then be attached where appropriate for
quick access to the information. As a
result the maintenance and installation work
can be carried out quicker and in a more
accurate manner. Costs are subsequently reduced.
optibelt SERVICE TOOLS
optibelt TT mini S
Technical data
Display:
LCD, 2 lines
Range of measurement:
10-600 Hz
Measuring accuracy:
10-400 Hz +/– 1 %
> 400 Hz +/– 2 %
... with a flexible
swan neck
for effortless
measurements at
difficult-to-reach
places
The Optibelt TT mini S frequency tension tester uses vibration
frequency as a means of measuring belt tension accurately.
This newly developed device provides universal application
possibilities for drives in mechanical engineering, the automotive industry and many other application areas.
Even drives in difficult to access areas can be effortlessly
tested with the TT mini S. The initial tension values of V-belts,
ribbed belts, and timing belts can be tested easily and rapidly.
In addition, the TT mini S offers further advantages:
• display in Hertz [Hz]
• large measuring range from 10-600 Hz
• easy and repeatable measurement
• compact dimensions (size of a mobile phone)
• automatic disconnection function
• calibrated in the factory and CE acceptance test certified
After switching on the device, it is ready for immediate
measurement. The mounted and tensioned belt is made to
vibrate by finger pressure or by hitting it with something.
The measuring head has to be held above the belt to function,
the TT mini S starts the measurement and displays the result in
Hertz [Hz]. The state, colour and type of the belt do not
influence the measurement, since the measurement is based on
an acoustic signal.
The tension recommendations can be retrieved from the
Optibelt specifications with our CAP calculation programs.
Optibelt TT mini S ensures the best possible belt service life!
Resolution:
10-99.9 Hz: 0.1 Hz
> 100 Hz: 1 Hz
Sensor:
acoustic, with electronic
suppression of noise
interference
Power supply:
batteries 2 x micro
(AAA-cells)
Wattage:
max. 12 mA
Working time:
> 48 hours of permanent
measurement (dependent
on the quality of the battery
used)
automatic disconnection after
5 minutes
Dimensions:
110 x 50 x 25 mm
Weight:
≤ 100 g
Test:
CE acceptance test
calibration in the factory
Accessories:
batteries, bag
optibelt SERVICE TOOLS
optibelt Service-Box
Contents
4 pieces Optikrik gauges,
Types 0, I, II, III
1 set of V-belt and pulley
groove gauges
1 measuring tape, 3 m
1 ballpoint pen with silver ink,
packed in a sturdy
plastic box
1 set of ribbed belt groove
gauges
The service box from Optibelt
is meant to support many
application areas on site.
Center distances, belt lengths
and pulley diameters can be
established quickly and easily
by means of the flexible
­measuring tape.
When dealing with V-belts and ribbed belts, a level of tension
that is too low results in unnecessary slipping of the belts, an
issue that is difficult to notice and is rarely realized.
This additional friction leads to increased energy consumption,
and decreased belt life. The friction ages and hardens the belt
resulting in mechanical efficiency losses that result in energy
costs being realized that could easily be eliminated.
In addition the reduction in belt life extends more costs by
shutting down equipment more often to maintain and replace
belt components.
Not to mention the opportunity costs of working on these
drives instead of something else. A level of tension that is too
high leads to an increased bearing and shaft loads which can
damage other components of the equipment. Also it can apply
a distortion of the belt composition that is undesirable. When
dealing with timing belts, the teeth may not engage cleanly
with a low or a high tension value being introduced. It is easy
to avoid these issues with the tools provided in the service
box.
… for fast help on site!
V-belts and pulleys can be
identified quickly and effortlessly
with the V-belt and pulley
groove g
­ auges. The pulley
groove flanks of V-grooved
pulleys can be checked for
angular ­deviation and wear.
Where necessary, marks may
be made on the belts such as
measurements, reference marks
etc. which are clearly readable
using the special ballpoint pen
with silver ink.
The inaccurate thumb method
for setting belt tension is made
redundant thanks to the ­Optikrik
belt tension gauge.
The application and control
of the belt tension with the
Optikrik facilitates the maintenance work of the installer and
increases the efficiency of the
drives.
optibelt SERVICE TOOLS
optibelt laser pointer II
Belt alignment
Put the 3 target magnets on
the front side of the pulley in
the position ≈ 0°, 90° and
270°.
Fix the optibelt laser pointer II
at the front side of the other
pulley, use magnet plate, if
necessary (caution, laserlinedifference).
Switch on the optibelt laser
pointer II and align it to the
target magnets.
With non-magnetic pulleys use
strong double-sided sticky tape.
The alignment of the belt drive
(horizontal and vertical) is
correct if the laser beam at all
3 target magnets is on the
same marking.
Benefits of the
Optibelt laser pointer II:
The Optibelt laser pointer II
­facilitates the alignment of
belt drives.
1. Easy application
for belt drives
The belt pulleys are aligned
to each other via the front
and/or the lateral surfaces.
3. Exactly aligned line
­projection
This professional handling
will improve the operation
of the belt and prolong
its service life considerably.
2. Laser power < 5 mW
4. Measurements
of parallel and angular
­misalignment
If necessary, align the belt
drive and check it again.
Technical data
Laser: class ll M
EN 60825-1
Output
power:
≤ 5 mW
Wavelength: 635 nm
5. Higher operational safety
of the drives
Measure
accuracy:
< 0.5 mrad
parallelism
to magnet face
6. Time-saving and exact
measuring method
Case:
brass, nickeled
Power:
1.5 V AA-battery
7. User-friendly application
CE approved
FDA certified
optibelt SERVICE TOOLS
optibelt CAP 6.0
There are different calculation
options for the user:
– power calculation for drives
with V-belts, timing belts
or ribbed belts
– two different calculation
screens
– length calculation
The user-friendly interface
in the CAP standard version
makes the calculation
of standard drives
­straightforward.
Drive calculation program
The Optibelt CAP drive calculation program has been used
world-wide for many years for calculating and sizing belt
drives.
Optibelt now introduces the next generation CAP 6.0.
The new graphics present the drive c­ alculation in a clearly
arranged format, making drive selection quick and clear.
The technically more
­sophisticated CAP Professional
version offers multi-pulley
drive calculations, to a high
degree of detail.
The calculation screen is further
enhanced with product pictures
and graphic representations
of the drive.
optibelt SERVICE TOOLS
optibelt CAD Pulleys
Optibelt pulleys plus enables
designers and developers
to access CAD drawings
of Optibelt standard pulleys
via the internet.
Internet service for designers
and developers
Click on www.optibelt.com for CAD drawings online.
The web based interactive
catalogue with V-grooved
pulleys, ribbed and timing belt
pulleys provides quick and
trouble-free access to a great
amount of useful information.
The pulleys are available in
different 2-D and 3-D formats.
It is easy and comfortable for
users to download and access
the available drawings in their
system.
optibelt SERVICE TOOLS
optibelt Measuring Gauge
for V-belts, timing belts and
ribbed belts
Measuring range: 500-2500 mm inside length (Li)
optibelt SERVICE TOOLS
optibelt CUT II
Technical data
Maximum sleeve width:
750 mm
Maximum sleeve length:
up to 5800 mm
Minimum sleeve length:
600 mm
Minimum sleeve length:
130 mm
with additional attachment
for small belt lengths
Sleeve tension:
automatic
with 4-level preset
Electrical connection:
400 V, 3-Phase, 50 Hz
The Optibelt CUT II sleeve cutting machine has been
­specifically ­developed for modern stock keeping
for the technical trade:
• for the cutting of any belt width from a sleeve
• for easy handling
• for the immediate requirements
of your customers
• for reducing the storage and costs
of individual belts
• cuts all standard timing belt and ribbed belt sections
Cutter bar speed: continuously variable;
30-300 min¹;
with rotation reversion
Colour:
blue
Machine dimensions:
length:approx. 3700 mm
width: approx. 1600 mm
height:approx. 1300 mm
1
5
optibelt RED POWER II
optibelt KB RED POWER II
Hochleistungs-Schmalkeilriemen,
wartungsfrei
High performance wedge belts,
maintenance-free
2
6
optibelt BLUE POWER
optibelt KB BLUE POWER
Hochleistungs-Schmalkeilriemen
High performance wedge belts
3
7
optibelt VB
optibelt KB VB
Klassische Keilriemen
Classical V-belts
9
optibelt
Super X-POWER M=S
Keilriemen,flankenoffen,
formgezahnt
V-belts, raw edge,
moulded cogged
10
11
12
13
2
3
4
5
6
7
8
optibelt SK
optibelt KB SK
Schmalkeilriemen
Wedge belts
4
8
1
14
optibelt OMEGA HL
optibelt OMEGA HP
optibelt OMEGA FanPower
optibelt OMEGA
optibelt OMEGA linear
Zahnriemen aus Chloropren
Chloroprene timing belts
15
16
optibelt ALPHA Power
optibelt ALPHA
optibelt ALPHA linear / V
optibelt ALPHAflex
Zahnriemen aus Polyurethan
Polyurethane timing belts
17
optibelt DK
Doppelkeilriemen
Double section V-belts
9
10
11
12
18
optimat OE
Endliche Keilriemen
DIN 2216, gelocht
Open-ended V-belting,
punched
19
optibelt RB
Rippenbänder
Ribbed belts
optibelt
Super KBX-POWER
Kraftbänder,flankenoffen
Kraftbands, raw edge
20
optibelt RR / RR PLUS
Kunststoffrundriemen
Plastic round section belting
optibelt SUPER VX
Breitkeilriemen,flankenoffen,
formgezahnt
Variable speed belts,
raw edge, moulded cogged
20
optibelt KK
Kunststoffkeilriemen
Plastic V-belting
13
17
14
18
15
19
16
20
optibelt SUPER DVX
Doppel-Breitkeilriemen,
flankenoffen,formgezahnt
Double section variable speed belts,
raw edge, moulded cogged
optibelt ZR
optibelt ZR linear
Zahnriemen aus Chloropren
Chloroprene timing belts
21
22
23
www.optibelt.com
24
21
optibelt KS
Keilrillenscheiben
V-grooved pulleys
22
optibelt ZRS
Zahnriemenscheiben
Timing belt pulleys
23
optibelt RBS
Rippenbandscheiben
Ribbed belt pulleys
24
optibelt
SERVICE KIT
© Arntz Optibelt Group · 315200/0910Hux
Lieferprogramm
Product Range
Download

SERVICE TOOLS - Naismith Engineering