24.06.2014 – TUESDAY
15:00 – 18:00
Registration of participants
Reception
18:00 – 20:30
Dinner (for participants who registered for the
Hotel Dunav)
Restaurant
25.06.2014 – WEDNESDAY
07:30 – 10:00
Breakfast (for participants who registered for
the Hotel Dunav)
Restaurant
11:00 – 13:00
Registration of participants
Reception
13:00 – 13:30
Opening Ceremony
Hall 1,2,3
13:30 – 14:00
Cocktail
Restaurant
14:00 – 15:30
PLENARY SESSION
Hall 1,2,3
Adrian Bruja
MODELLING AND WORKING SIMULATION OF THE MECHANISM OF AXIAL PISTON
HYDROSTATIC PUMPS USING DENAVIT-HARTENBERG METHOD
Inga A. Emelyanova
DEFINITION RATIONAL GATE FRAME SIZE DISTRIBUTION UNIT DOUBLE PISTON
CONCRETE PUMP WITH HYDRAULIC DRIVE
Dario Croccolo
MECHANICAL BEHAVIOUR AND FRICTION EVOLUTION ON BOLTED CONNECTIONS
15:30 - 17:00
Lunch
17:00 - 19:00
Free activities
19:00 - 20:30
Dinner
Restaurant
Restaurant
26.06.2014 - THURSDAY
07:30 – 09:00
Breakfast (for participants who registered for
the Hotel Dunav)
Restaurant
08:00 – 09:30
Registration of participants
Reception
09:30 – 11:00
SESSION 1 - EARTH-MOVING AND
TRANSPORTATION MACHINERY
Chairmen:
Инга ЕМЕЛЬЯНОВA, Milomir GASIC, William SINGHOSE
Hall 1
Inga Emelyanova, Vladimir Blazhko
GENERAL CLASSIFICATION OF SMALL-SIZED TECHNOLOGICAL SETS FOR
PRODUCTION OF DRY BUILDING MIXTURES
William Singhose, Dooroo Kim, Joshua Vaughan
POST-EJECTION FAILURE MODE OF POST DRIVING MACHINES
Marian Dima, Cătălin Frăncu, Radu Ghelmeci
DETERMINING THE INVERSE KINEMATICS MODEL OF A BUCKET EXCAVATOR’S
DIGGING EQUIPMENT
Valery Shevchenko
ADAPTATION OF EARTH-MOVING MAСHINES TO EXTERNAL LOADING
CONDITIONS
Anton Kholodov, Leonid Khmara
INCREASING THE EFFICIENCY OF THE OPERATION OF THE BATCH-TYPE EARTHMOVING MACHINES AT THE EXPENSE OF USING THE PNEUMATIC STORAGE
SYSTEM
Mile Savković, Milomir Gašić, Nebojša Zdravković, Goran Bošković, Goran Pavlović
FRACTURE ANALYSIS OF THE HYDRAULIC TRUCK CRANE ATLAS 3006
Jovan Vladić, Dragan Živanić, Igor Džinčić, Radomir Đokić, Anto Gajić
APPLICATION OF THE NUMERICAL METHODS FOR DYNAMIC ANALYSIS OF
TRANSPORTSYSTEMS WITH ROPE
Jovan Pavlović, Dragoslav Janošević, Vesna Jovanović
THE DEVELOPMENT OF HYDROSTATIC DRIVE TRANSMISSIONS OF WHEEL
LOADERS
Radoslav Simić, Nikola Brkljač
ABOUT CHOOSING THE RIGHT COMPUTATIONAL MODEL FOR FEA STRESS
ANALYSIS OF DRILLING RIGS AND WELL SERVICING STRUCTURES IN OIL INDUSTRY
Valery Shevchenko, Olexandra Chaplygina, Zhanna Beztsennaya
ROAD-HOLDING ABILITY OF THE MOTOR GRADER IN THE PROCESS OF PERFORMING WORK OPERATIONS
11:00 – 11:30
Coffee break
11:30 – 13:00
Session 2 - EARTH-MOVING AND
TRANSPORTATION MACHINERY
Chairmen:
Анатолий ДОЦЕНКО, Miomir JOVANOVIĆ, Mile SAVKOVIĆ
Hall 1
Evgeniy Kudryavtсev
5D MODELLING OF MECHANICAL SYSTEMS
Anatoly Dotsenko
NEW EFFECTIVE MACHINE FOR ROLLING HOLES DURING INSTALLING
UNDERGROUND COMMUNICATIONS IN URBAN CONSTRUCTION
Cătălin Frăncu, Marian Dima
KINEMATICS COMPUTATIONAL MODELLING OF SELF-ERECTING TOWER CRANES’
ERECTION MECHANISM
Ivan Ivanovich Nazarenko, Anatoliy Tofiliyovych Sviderskyy, Mykola Mykolayovych
Ruchynskyy, Oleg Pavlovych Dedov
RESEARCH AND THE CREATION OF ENERGY-EFFICIENT VIBRATION MACHINES
BASED ON THE STRESS-STRAIN STATE OF METAL AND TECHNOLOGICAL
ENVIRONMENTS
Ioan Bărdescu, Amelitta Legendi
TOP TIER TECHNOLOGY IN SUBWAY TUNNELLING USING A MECHATRONIC
DRIVING SHIELD
Vlada Gašić, Aleksandar Obradović, Nenad Zrnić
FREE VIBRATIONS OF THE PLANAR GANTRY-LIKE STRUCTURES
Goran Pavlovic, Milomir Gasic, Mile Savkovic, Radovan Bulatovic, Nebojsa
Zdravkovic
OPTIMIZATION OF THE BOX SECTION OF THE MAIN GIRDERS OF THE BRIDGE
CRANE FOR THE CASE OF PLACING THE RAIL IN THE MIDDLE OF THE TOP FLANGE
Dragoslav Janošević, Jovan Pavlović, Vesna Jovanović, Predrag Milić
OPTIMAL SYNTHESIS OF THE DRIVING MECHANISM OF BASKET ARTICULATED
TRUCKS
Radomir Đokić, Jovan Vladić, Anto Gajić, Dragan Živanić
NUMERICAL ANALYSIS OF ELEVATOR ROPES VIBRATION WITH TIME VARYING
LENGTH
Goran Radoičić, Miomir Jovanović, Ivan Savić
THE INFLUENCE OF STRUCTURE ANCHORING ON EIGENVALUES AND
TRANSLATIONS
13:00 – 13:30
Coffee break
13:30 – 14:30
GIFT Project – Open Day
14:30 – 16:00
Lunch
16:30 – 18:00
Session 3 - EARTH-MOVING AND
TRANSPORTATION MACHINERY
Chairmen:
Mircea ALAMOREANU, Иван Иванович НАЗАРЕНКО
Hall 1, 2
Restaurant
Hall 1
Mircea Alamoreanu, Andrei Vasilescu
THEORETICAL ASPECTS OF ZIP LINE ANALYSIS
Huasen Liu, William Singhose, Wenming Cheng
TIP-OVER STABILITY OF CRAWLER CRANES WITH MOVABLE COUNTERWEIGHT
Boris Jerman, Jurij Hladnik, Vlada Gašić, Miloš Đorđević
KINEMATICS OF THE TRUCK MOUNTED HYDRAULIC CRANES
Marian Dima, Cătălin Frăncu, Radu Ghelmeci
DETERMINING THE FORWARD KINEMATICS MODEL OF A BUCKET EXCAVATOR’S
DIGGING EQUIPMENT
Zoran Petrović, Uglješa Bugarić, Dušan Petrović
CASE STUDY OF PRODUCT INNOVATION BASED ON SPECIAL CRANE TROLLEY
Milos Djordjevic, Nenad Zrnic, Boris Jerman
SIMPLIFIED LIFE CYCLE ASSESSMENT OF A CONVEYOR BELTING
Rodoljub Vujanac, Nenad Miloradovic
SELECTION OF THE BASIC PARAMETERS OF GENERAL PURPOSE TELESCOPIC BELT
CONVEYOR
Nebojsa Gnjatovic, Goran Milojevic, Ivan Milenovic, Aleksandar Stefanovic
‘DESIGN-IN’ FAULTS - THE REASON FOR SERIOUS DRAWBACKS IN HIGH CAPACITY
BUCKET WHEEL EXCAVATOR EXPLOITATION
Spasoje Trifković, Milomir Gašić, Nebojša Radić, Miroslav Milutinović
THE EQUATIONS OF MOTION OF THE CRANE WITH LOADING-UNLOADING
TROLLEY ON THE SLEWING PLATFORM
Vesna Jovanović, Dragoslav Janošević, Jovan Pavlović
THE KINEMATIC AND DYNAMIC ANALYSIS OF THE HYDRAULIC EXCAVATORS
Svetomir Simonovic
ON DESIGN OF COMPACT PASSENGER ELEVATOR SYSTEMS
09:30 – 11:00
Session 4 - PRODUCTION TECHNOLOGIES
Chairmen:
Radomir SLAVKOVIĆ, Ljubomir LUKIĆ
Hall 3
Radomir Slavković, Ivan Milićević, Nedeljko Dučić, Marko Popović, Zvonimir
Jugović
IDENTIFICATION OF SUPPORTING ELEMENTS DYNAMICS OF PRODUCTION
MACHINES USING DYNAMICS OF RIGID BODIES SYSTEM
Ljubomir Lukic, Mirko Djapic, Aleksandra Petrovic, Veda Kilibarda
NEW CONCEPT OF MULTI-AGENT CAPP SYSTEM IN INTELIGENT MANUFACTURING
SYSTEMS
Elvis Hozdić, Emine Hozdić
COMPLEXITY IN PRODUCTION SYSTEMS
Goran Miodragović, Radovan Bulatović, Slobodan Ivanović, Marina Bošković
THE USE OF BIOLOGICALLY-INSPIRED ALGORITHMS FOR THE OPTIMIZATION OF
MACHINING PARAMETERS
Aleksandra Petrović, Ljubomir Lukić
MACHINING PARAMETERS INFLUENCE ON CUTTING FORCE USED FOR TOOL PATH
OPTIMIZATION IN END MILLING
Ljiljana Pecić
MARKETING ORIENTED ORGANIZATIONAL CULTURE AS PREREQUISITE FOR TQM
IMPLEMENTATION: THE CASE STUDY OF SERBIAN MECHANICAL INDUSTRY
Marina Pljakić, Miomir Vukićević, Milan Kolarević, Mišo Bjelić
RECOGNIZING MAG PROCESS PARAMETERS ON THE BASIS OF THE SOUND
EMITTED
11:00 – 11:30
Coffee break
11:30 – 13:00
Session 5 - PRODUCTION TECHNOLOGIES
Chairmen:
DRAGAN TEMELJKOVSKI, MILAN KOLAREVIĆ
Hall 3
Milan Kolarević, Vladan Grković, Zvonko Petrović, Miloje Rajović
APPLICATION OF SUBMATRICES FOR SOLVING PHASE PROCESSES BY THE LINEAR
PROGRAMMING METHOD
Miloš Madić, Miroslav Radovanović, Danijel Marković, Goran Petrović
APPLICATION OF THE COPRAS METHOD FOR SELECTION OF COMPETITIVE NONCONVENTIONAL MACHINING PROCESSES
Dragana Temeljkovski, Dragan Temeljkovski
EVALUATION OF QUALITY AND EFFICIENCY OF TECHNOLOGIES FOR MAKING AXISYMMETRICAL PROFILES – METHOD OF SUPERIORITY AND INFERIORITY
Andjela Lazarevic, Dragoljub Lazarevic
PREDICTION OF THE WORKPIECE BEVEL ANGLE DURING PLASMA CUTTING
PROCESS BY NEURAL NETWORK MODELLING
Andjela Lazarevic, Dragoljub Lazarevic
EXPERIMENTAL RESEARCH OF THE PLASMA CUTTING PROCESS
Dragan Milcic, Amir M. Rashid, Boban Anđelković, Mustafa Amir Mustafa
ON THE EFFECT OF NORMAL LOAD AND SLIDING SPEED ON WEAR UNDER DRY
SLIDING CONTACT ON THE BRASS (70-30, 60-40)
Zoran Petrovic, Zlatan Car, Branko Radicevic, Leon Šikule, Vladan Grkovic
IMPLEMENTATION OF THE RCM METHODOLOGY ON THE EXAMPLE OF CITY
WATERWORKS
Mišo Bjelić, Karel Kovanda, Ladislav Kolařík, Marie Kolaříková, Petr Vondrouš
MODELING AND NUMERICAL ANALYSIS OF WIRE TEMPERATURE IN GMA
WELDING
13:00 – 13:30
Coffee break
13:30 – 14:30
GIFT Project – Open Day
Hall 1, 2
14:30 – 16:00
Lunch
Restaurant
16:30 – 18:00
Session 6 - CIVIL ENGINEERING AND MATERIALS
Chairmen:
Vlastimir RADONJANIN, Olivera ERIĆ-CEKIĆ, Duško MINIĆ
Hall 3
Milinko Vasić, Mitar Đogo, Branko Jelisavac
DRAINAGE WELLS ON THE LANDSLIDE - SLOBODA BRIDGE IN NOVI SAD
Milena Rangelov, Vlastimir Radonjanin, Mirjana Malešev, Jovana Kaličanin
MICROSTRUCTURAL ANALYSIS OF CONSTRUCTIONAL MATERIALS
Nihat Morova, Sercan Serin, Serdal Terzi, Mehmet Saltan, Mustafa Karaşahin
ESTIMATION OF MARSHALL STABILITY OF STEEL FIBER REINFORCED ASPHALT
CONCRETE USING ADAPTIVE NEURO-FUZZY INFERENCE SYSTEM
Mitar Đogo, Milinko Vasić, Rada Stevanović
GEOTECHNICAL CONDITIONS FOR FOUNDATION OF COMPRESSOR IN VELEBIT
Živadin Micić, Slobodan Petrović
KNOWLEDGE INNOVATION TRENDS ON A STANDARDIZATION PLATFORM PARALLEL: CIVIL ENGINEERING AND RAILWAY ENGINEERING
Cristiano Fragassa, Ana Pavlovic, Pier Paolo Conti
ALTERATION IN MECHANICAL PROPRIETIES OF PORCELAIN PASSING BY A
BENDING PROCESS
Dusan Arsic
DEPENDENCE OF MECHANICAL PROPERTIES OF THE BASE METAL AND WELDED
JOINT OF THE HIGH STRENGTH STEEL S690QL ON ELEVATED TEMPERATURES
Olivera Eric Cekic, Radomir Jovičić, Branko Zrilić, Nebojša Pantelić
SYSTEM FOR MONITORING THE WELDING OPERATION
Milena Premovic, Dragan Manasijevic, Dusko Minic, Dragana Zivkovic
DEFINITION OF THE PHASE DIAGRAM AND EXPERIMENTAL INVESTIGATIONS OF
THE TERNARY AG–GE–SB SYSTEM
Dusko Minic, Milena Premovic, Ljiljana Nedeljkovic, Vladan Vuksanovic
EXPERIMENTAL INVESTIGATION OF TERNARY BI‒GA‒SB SYSTEM
Diana Glushkova, Valentina Tarabanova, Larisa Rak
INVESTIGATION OF STEEL PROPERTIES FOR SIDE FRAMES OF SCRAPER CONVEYOR
PANS
18:00 – 18:30
Coffee break
19:00 – 20:30
Dinner
Restaurant
27.06.2014. - FRIDAY
07:30 – 09:00
Breakfast (for participants who registered for the Restaurant
Hotel Dunav)
08:00 – 09:30
Registration of participants
09:30 – 11:00
SESSION 7 - AUTOMATIC CONTROL, ROBOTICS
AND FLUID TECHNIQUE
Chairmen:
Novak NEDIĆ, Erol UYAR, Владимир Алексеевич ЖУЛАЙ
Reception
Hall 1
Erol Uyar, Semih Arikan, Mücahid Candan, Nail Akçura
MODELLING, SIMULATION AND CASCADE NAVIGATION CONTROL OF A
PROTOTYPE CARGO VESSEL
Vladimir Alexeevich Zhulai, Vladimir Ivanovich Yenin, Evgenii Vladimirovich
Kozhakin
DEFINITION OF POWER AND KINEMATIC PARAMETERS OF FULL-FLOW
HYDROSTATIC TRANSMISSION
Radu Ghelmeci, Marian Dima
THE LOCALIZATION OF THE ROBOTIC MOBILE PLATFORMS FOR CONSTRUCTIONS
WITH LASER TRACKER AND SMARTTRACK SENSOR
Novak Nedić, Saša Prodanović
COMPARISON OF TWO APPROACHES TO IDENTIFICATION PROCESS OF
CONDENSER IN THERMAL POWER PLANT
Dragan Pršić, Ljubiša Dubonjić, Vladimir Stojanović
HARMONIC ANALYSIS OF A PNEUMATIC FIXED ORIFICE
Radovan Petrovic, Nenad Todic, Jelena Zivkovic, Zoran Glavcic
MATHEMATICAL MODELING, IDENTIFICTION AND OPTIMIZATION OF
PARAMETERS OF THE VALVE PLATE OF THE WATER HYDRAULIC PISTON-AXIAL
PUMP/MOTOR
Vasil Dimitrov, Ivan Milenov, Emiliya Dimitrova
COMPUTER CONTROL ON POSITIONING STEPPER DRIVE – LABORATORY STAND
Gökmen Katipoğlu, Savaş Takan
POSITION CONTROL OF A THREE DEGREE OF FREEDOM ROBOT
11:00 – 11:30
Coffee break
11:30 – 13:00
SESSION 8 - AUTOMATIC CONTROL, ROBOTICS
AND FLUID TECHNIQUE
Chairmen:
Vojislav FILIPOVIĆ, Mihajlo STOJČIĆ, Ivan MILENOV
Hall 1
Vojislav Filipovic, Vladimir Djordjevic
RECURSIVE ESTIMATION OF THE TAKAGI-SUGENO MODELS I: FUZZY CLUSTERING
AND THE PREMISE MEMBERSHIP FUNCTIONS ESTIMATION
Denis Pogosov
ENERGY PERFORMANCE CONSTANT POWER MOTION CONTROL OF ROBOTIZED
MINING TRUCK
Mihaylo Stoychitch
DESIGN THE DIGITAL INTERNAL MODEL CONTROL OF AN ELECTROMECHANICAL
POSITIONING SYSTEM WITH CONTROLLED JERK
Ljubisa Dubonjic, Novak Nedic, Dragan Prsic
DESIGN OF PID CONTROLLERS FOR HIGH ORDER SYSTEMS
Vladimir Stojanovic, Vojislav Filipovic
ROBUST AKAIKE’S CRITERION FOR MODEL ORDER SELECTION
Saša Prodanović, Vesna Brašić
SIMULATION RESULTS OF PARAMETER ESTIMATION FOR A GIVEN ARX MODEL –
SYSTEM IDENTIFICATION
Vesna Brašić
COMPARING THE RESULTS OF STOCHASTIC APPROXIMATION METHOD WITH
AVERAGING RELATED TO CONVENIENT IDENTIFICATION METHODS
Vladimir Djordjevic, Vojislav Filipovic
ROBUST RECURSIVE IDENTIFICATION OF MULTIVARIABLE PROCESSES
13:00 – 15:00
Lunch
Restaurant
15:00 – 15:30
Presentation: Project ADRIA HUB
Hall 1
15:30 – 16:30
Session 9 – MACHINE DESIGN AND MECHANICS
Hall 1
Chairmen:
Vanja ŠUŠTERIČ, Snežana ĆIRIĆ-KOSTIĆ
Sanja Vasin, Milosav Ognjanović, Marko Miloš
GEAR DRIVE UNIT WITH CONTINUAL VARIATION OF TRANSMISSION RATIO
Jasna Glišović,, Jovanka Lukić, Dobrivoje Ćatić, Vanja Šušteršič
CAD MODEL OF DISC BRAKE FOR ELIMINATING NOISE PROBLEMS
Aleksandar Vranić, Snežana Ćirić Kostić, Bojan Tatić
INFLUENCE OF SUB-STRUCTURES’ SHAPES ON VIBRATION BEHAVIOUR OF
SANDWICH WALLS
Aleksandar Košarac,, Milan Zeljković, Cvijetin Mlađenović, Aleksandar Živković
NUMERICAL-EXPERIMENTAL IDENTIFICATION OF A WORKING UNIT MODULE
DYNAMIC CHARACTERISTICS
Ivan Milićević, Stojan Savković, Milosav Šekarić, Radomir Slavković, Nedeljko
Dučić, Marko Popović
THE USE OF VIRTUAL MODELS IN THE DESIGN OF MECHANISMS
Slaviša Šalinić, Goran Bošković, Marko Nikolić
CONTRIBUTION TO THE DETERMINATION OF THE LOAD ON SUSPENSION RING OF
THE UNDERFRAME OF THE HYDRAULIC EXCAVATOR
16:30 – 17:00
Coffee break
17:00 - 18:00
Session 9 - MACHINE DESIGN AND MECHANICS
Chairmen:
Miroslav ŽIVKOVIĆ, Slaviša ŠALINIĆ
Hall 1
Miodrag Arsić, Srđan Bošnjak, Vencislav Grabulov, Brane Vistać, Zoran Savić
INFLUENCE OF PLASTICITY REDUCTION ON INTEGRITY AND SERVICE LIFE OF
TURBINE RUNNER COVER OF THE HYDROELECTRIC GENERATING SET A4 AT
HYDRO POWER PLANT „ĐERDAP“
Milan Dedic,, Milica Todorovic, Miljan Veljovic
COUPLING OF BENDING IN HORIZONTAL PLANE AND TWIST OF A TRUSS BEAM
WITH TRIANGULAR CROSS-SECTION
Marko Topalović, Vladimir Milovanović, Milan Blagojević, Aleksandar Dišić,
Dragan Rakić, Miroslav Živković
FREIGHT WAGON MASS REDUCTION USING PARAMETRIC OPTIMIZATION
Aleksandar Nikolić, Slaviša Šalinić
NATURAL FREQUENCIES OF A TAPERED CANTILEVER BEAM OF CONSTANT
THICKNESS AND LINEARLY TAPERED WIDTH
Milica Todorovic, Milan Dedic
AN ANALYSIS OF THE END DEFLECTIONS OF SPATIAL TRUSSES WITH RIGIDITY
VARIABLE IN INTERVALS
Vojkan Nojner, Dragan Milčić
SHAPING THE HOUSING OF TRANSMISSION GEAR WITH HIGH SPECIFIC POWER
09:30 – 11:00
SESSION 10 - RAILWAY ENGINEERING
Hall 3
Chairmen:
Dobrinka ATMADZHOVA, Dragan PETROVIĆ, Vasko NIKOLOV
Vasko Nikolov
INFLUENCE OF THE DESIGN OF BRAKE DISCS ON THE THERMAL EFFICIENCY
Victor Shevchenko, Vyacheslav Pshikhopov, Michael Medvedev, Anatoly Haiduk,
Alexander Zarifyan, Yuri Voloschenko
METHOD OF CONTROL OF THE TRAIN MOVEMENT BASED ON NATURAL
RECUPERATION OF ENERGY
Dobrinka Atmadzhova, Tsvyatko Penchev
INFLUENCE OF TRACK SUBSIDENCE ON ROLLING STOCK DERAILMENT RISK
Venelin Pavlov, Dobrinka Atmadzhova
A CRASH BUFFER FOR RAILWAY VEHICLES
Nebojša Bogojević, Jelena Tomić, Slobodan Todosijević, Vojkan Lučanin
VALIDATION OF A RAILWAY VEHICLE MODEL BASED ON COMPARISON OF
CUMULATIVE DISTRIBUTION FUNCTIONS
Milan Bižić, Dragan Petrović, Isidora Pančić
FUNCTIONS OF WHEEL-RAIL CONTACT GEOMETRY
Dragan Petrović, Milan Bižić, Dragan Pančić, Dragić Mirković
NUMERICAL SIMULATION OF WAGONS IMPACT
11:00 – 11:30
Coffee break
11:30 – 13:00
SESSION 11 - RAILWAY ENGINEERING
Chairmen:
Victor Shevchenko, Branislav GAVRILOVIĆ, Nelly STOYTCHEVA
Hall 3
Branislav Gavrilovic, Zoran Bundalo, Savo Gavrilovic
THE WAVE DISTORORTION ANALYSIS OF THE VOLTAGE FOR CONTACT LINE
SYSTEM AT SERBIAN RAILWAYS
Margarita Georgieva, Nelly Stoytcheva
DEVELOPMENT OF KEY PERFORMANCE INDICATORS FOR MAINTENANCE OF THE
RAILWAY SIGNALLING SYSTEM
Nelly Stoytcheva, Margarita Georgieva
EFFECTIVE STRATEGY FOR MAINTENANCE OF THE RAILWAY ASSETS
Kiril Karagyozov
APPLICATION OF GPSS QUEUING NETWORK MODEL TO EVALUATE THE
PERFORMANCE OF THE TRANSPORTATION TECHNOLOGICAL SYSTEM
Zdravko Tešić, Branislav Stevanov, Danijela Gračanin
WEB BASED SYSTEM FOR THE INTEGRATION OF THE OVERHAUL PROCESS FOR
RAILWAY BRAKING DEVICES
Emiliya Dimitrova, Vasil Dimitrov
IMITATION MODEL OF DISPATCHING SYSTEM FOR CONTROL ON PROCESSES IN
METROPOLITAN-SOFIA
Valeri Nikolov, Boris Galev
OPTIMIZATION OF FREIGHT WAGONS FLEET OF REPUBLIC OF BULGARIA
13:00 – 15:00
Lunch
Restaurant
15:00 – 15:30
Presentation: Project ADRIA HUB
Hall 1
15:30 – 16:30
Session 12 - URBAN ENGINEERING, THERMAL
TECHNIQUE AND ENVIRONMENT PROTECTION
Hall 3
Chairmen:
Nicolae HERISANU, Dragan CVEKOVIC, Milan DEDIC
Cristina Sescu-Gal, Mihail Savaniu
MONITORIZATION SYSTEM FOR THE ENVIROMENT IN THE PROXIMITY OF
INDUSTRIAL POLLUTERS USING A SINGLE-BOARD COMPUTER RASPBERRY PI
Boban Cvetanović, Miljan Cvetković, Dragan Cvetković, Miloš Ristić
EFFECT OF THE SUSPENSION ON WHOLE BODY VIBRATION: COMPARISON OF
HIGH POWER AGRICULTURAL TRACTORS
Vasile Bacria, Nicolae Herisanu
INVESTIGATION AND REDUCTION OF NOISE GENERATED BY HEAVY TRAFFIC IN
URBAN ENVIRONMENT
Dusan Petrovic, Ugljesa Bugaric, Zoran Petrovic
RECONSTRUCTION OF WAREHOUSE SYSTEM IN PHARMACEUTICAL INDUSTRY
Vojislav Tomić, Goran Petrović, Danijel Marković, Miloš Madić
PERSPECTIVE OR AIRLINE DEVELOPMENT, THE CASE OF “KONSTANTIN VELIKI”
AIRPORT NIŠ
Goran Markovic, Zoran Bogicevic, Mile Savkovic, Zoran Marinkovic, Vojislav Tomic
APPLICATION OF CORRELATION TEST TO CRITERIA SELECTION FOR MULTI
CRITERIA DECISION MAKING PROBLEMS IN DOMAIN OF LOGISTICS SYSTEMS
16:30 – 17:00
Coffee break
17:00 – 18:00
Session 13 - URBAN ENGINEERING, THERMAL
TECHNIQUE AND ENVIRONMENT PROTECTION
Chairmen:
Mirko DJAPIC, Nicolae HERISANU, Milan DEDIC
Hall 3
Jelica Dimitrijević, Stefan Pantović
DEVELOPMENT OF MICRO COGENERATION PLANTS IN INDIVIDUAL HOUSES
Slobodan Todosijević, Slobodanka Galović, Jelena Tomić, Zlatan Šoškić
DEVELOPING MODEL OF A PHOTOACOUSTIC MEASUREMENT SYSTEM
Jovan Nesovic, Mirko Đapić
DEVELOPING METHODOLOGY FOR THE SELECTION OF PRIORITY LOCAL
INFRASTRUCTURE PROJECTS TO BE IMPLEMENTED IN SPECIFIC PLANNED PERIOD
Zlatan Šoškić, Jelena Tomić, Nebojša Bogojević, Slobodan Todosijević
A SIMPLIFIED METHOD FOR DATA PROCESSING OF SIGNALS WITH HEAVY DATA
TRANSMISSION LOSSES
Rade Karamarkovic, Vladan Karamarkovic, Miljan Marasevic, Andjela Lazarevic
SIMPLIFIED MODELING OF ELECTRICAL CABINETS
Miljan Marasevic, Vladan Karamarkovic, Rade Karamarkovic, Nenad Stojic
ENERGETIC AND EXERGETIC EVALUATION OF 4 SYSTEMS FOR A ROTARY KILN
IMPROVEMENT
18:00 – 19:00
FINAL PLENARY SESSION
20:00
Gala dinner
Hall 1, 2
Restaurant
28.06.2014 - SATURDAY
07:30 – 10:00
Breakfast (for participants who registered for the Restaurant
Hotel Dunav)
09:00 – 14:00
Tourist Tour (Sargan 8 - Narrow-gauge Heritage
Railway)
Hotel Dunav
Parking Lot
14:00 – 15:00
Lunch
Restaurant
15:00
Conference closing
NOTES
Download

Untitled - VIII Triennial International Conference Heavy Machinery