Wednesday, October 15, 2014
Workshop - "Writing and Reviewing Scientific Papers for International Journals" (in English)
15:30 – 17:30
Prof.Dr. David TAYLOR, Editor-in-Chief
Journal of the Mechanical Behavior of Biological Materials
Trinity College, Dublin, Ireland
Laney ZHOU, Executive Publisher at Elsevier
Kidlington, Oxfordshire, United Kingdom
Location: Faculty of Engineering E8 Conference Room / SDÜ West Campus
20:00 – 24:00
Sports & Leisure Activities (Swimming Pool, Rose Bath, Sauna, Squash, Basketball)
Location: 29 Ekim Swimming Pool - Ataturk Sports Center/SDÜ East Campus
Thursday, October 16, 2014
ENGLISH/TURKISH/ENGLISH simultaneous translations will be available in Room A.
09:00 – 09:50
Opening Ceremony – The Stand of Respect, The National Anthem of Turkey, Introduction to the SDU,
Turkish Folk Dance Show, The Opening Talks, The Presentation of the Health Technology Group of the
Biomechanics Institute of Valencia
(Simultaneous Translation Available)
Location: Prof.Dr. Lütfü Çakmakçı Congress Center, Room A / SDÜ West Campus
09:50 – 10:10
TEA/COFFEE BREAK
Opening Plenary Talk - "Structural Biomaterials: Learning Lessons from Nature" (Simultaneous
Translation Available)
10:10 – 10:50
Prof. Dr. David TAYLOR - Trinity College, Dublin, Ireland
Location: Prof.Dr. Lütfü Çakmakçı Congress Center, Room A / SDÜ West Campus
10:50 – 10:55
BREAK
Session I (Room A, Simultaneous Translation Available) / Tissue Engineering
Design and Manufacture of the Sagittal Split Osteotomy Guide and Soft Tissue Retractor (in Turkish)
10:55 – 11:10
Yunus Z. ARSLAN1, Fatih TURAN1, Erol CANSIZ2
1 İstanbul University, Faculty of Engineering, Department of Mechanical Engineering, İstanbul, Turkey
2 İstanbul University, Faculty of Dentistry, Oral and Maxillofacial Surgery, İstanbul, Turkey
Mechanical Investigation of Skin Healing (in Turkish)
11:10 – 11:25
Aylin BEKEM1, Ahmet ÜNAL1, Hüsnü AYDIN2, İshak Sefa TÜZÜN2, Tamer Karşıdağ2
1 Yıldız Technical University, Chemical-Metallurgical Faculty, Department of Metallurgical and Materials
Engineering, İstanbul, Turkey
2 Haseki Training and Research Hospital, Department of General Surgery, İstanbul, Turkey
Indentation and Observation of Anisotropic Soft Tissues Using an Indenter Device (in English)
11:25 – 11:40
Parinaz
1 Middle
2 Middle
3 Middle
ASHRAFI1, 2, Ergin TÖNÜK1, 2, 3
East Technical University, Department of Biomedical Engineering, Ankara, Turkey
East Technical University, BIOMATEN, CoE in Biomaterials and Tissue Engineering, Ankara, Turkey
East Technical University, Department of Mechanical Engineering, Ankara, Turkey
-1-
Modeling Anisotropic Behavior of Viscoelastic Soft Tissue using Fractional Order Calculus (in English)
11:40 – 11:55
Parinaz
1 Middle
2 Middle
3 Middle
ASHRAFI1, 2, Ergin TÖNÜK1, 2, 3
East Technical University, Department of Biomedical Engineering, Ankara, Turkey
East Technical University, BIOMATEN, CoE in Biomaterials and Tissue Engineering, Ankara, Turkey
East Technical University, Department of Mechanical Engineering, Ankara, Turkey
Session I (Room B) / Biomechanics in Nature
Investigation of Hydrodynamic Drag in A Swimming Squid (in English)
10:55 – 11:10
Mahdi TABATABAEI 1, Ali Bahadır OLCAY2, Gökhan GÖKÇEN3, Hasan A. HEPERKAN1, Abdülkerim OKBAZ
1 Yildiz Technical University, Faculty of Mechanical Engineering, Besiktas, Istanbul, Turkey
2 Yeditepe University, Department of Mechanical Engineering, Atasehir, Istanbul, Turkey
3 Dogus University, Department of Mechanical Engineering, Kadikoy, Istanbul, Turkey
Understanding Flow Characteristics of Swimming Squid Using 2D Axisymmetic Numerical Model (in
English)
11:10 – 11:25
Mahdi TABATABAEI1, Ali Bahadır OLCAY2, Gökhan GÖKÇEN3, Hasan A. HEPERKAN1, Abdülkerim OKBAZ1
1 Yildiz Technical University, Faculty of Mechanical Engineering, Besiktas, Istanbul, Turkey
2 Yeditepe University, Department of Mechanical Engineering, Atasehir, Istanbul, Turkey
3 Dogus University, Department of Mechanical Engineering, Kadikoy, Istanbul, Turkey
Construction of Three-Dimensional Finite Element Model of a Squid Based on Computed Tomography (in
Turkish)
11:25 – 11:40
M. Gökhan GÖKÇEN1, Ali Bahadır OLCAY2
1 Doğuş University, Department of Mechanical Engineering, Kadıkoy, İstanbul, Turkey
2 Yeditepe University, Department of Mechanical Engineering, Ataşehir, İstanbul, Turkey
Biocompatibility and Biomechanics Features of Chondrocyte Cells on Loofah Based Scaffolds Combination
with Hydroxyapatite, Cellulose, Poly-L-Lactic Acid (in Turkish)
Berivan CECEN1, Didem KOZACI2, Mithat YUKSEL3, Hasan HAVITCIOGLU1,4
11:40 – 11:55
1 Dokuz Eylül University, Institute of Health Sciences, Biomechanics Division, İzmir, Turkey
2 Adnan Menderes University, Faculty of Medicine, Biochemistry Division, Aydın, Turkey
3 Ege University, Faculty of Engineering, Department of Chemical Engineering, İzmir, Turkey
4 Dokuz Eylül University, Faculty of Medicine, Orthopaedics and Traumatology, İzmir, Turkey
11:55 – 12:05
BREAK
Plenary Talk I - "Biomechanical Properties of Structural Scaffolds in Tissue Engineering" (Simultaneous
Translation Available)
12:05 – 12:45
Prof.Dr. Hasan Havıtçıoğlu - Dokuz Eylül University, İzmir, Turkey
Location: Prof.Dr. Lütfü Çakmakçı Congress Center, Room A / SDÜ West Campus
13:00 – 14:10
Lunch (Faculty & Staff Cafeteria / SDÜ East Campus)
Session II (Room A, Simultaneous Translation Available) / Dental Biomechanics-1
14:10 – 14:25
The Effect of Surface Shaping on Osseointegration of Dental Implant Applications By Micro Production
Method (in Turkish)
Sinan KÖSE, Ömer Necati CORA, Hasan SOFUOĞLU
Karadeniz Technical University, Department of Mechanical Engineering, Trabzon, Turkey
14:25 – 14:40
Usability of Ultra-fine Grained Titanium on Dental Implant Applications (in Turkish)
İlyas HACISALİHOĞLU1, Gençağa PÜRÇEK2, Akgün ALSARAN3,4
-2-
1 Erzurum Technical University, Department of Mechanical Engineering, Erzurum, Turkey
2 Karadeniz Technical University, Department of Mechanical Engineering, Trabzon, Turkey
3 Atatürk University, Department of Mechanical Engineering, Erzurum, Turkey
4 Kafkas University, Department of Mechanical Engineering, Kars, Turkey
Investigation on Stress Distribution of Two Commercial Dental Implant Systems with 3-D Finite Element
Analysis (in Turkish)
14:40 – 14:55
İbrahim Damlar1, Emre ÖZYILMAZ2, Ahmet ALTAN3, Eda ÖZYILMAZ4
1 Mustafa Kemal University, Faculty of Dentistry, Oral and Maxillofacial Surgery, Antakya, Turkey
2 Hitit University, Faculty of Engineering, Department of Mechanical Engineering, Çorum, Turkey
3 Amasya University, Faculty of Technology, Department of Mechanical Engineering, Amasya, Turkey
The Effects of Different Attachment Systems on Stress In 2-Implant-Retained Overdentures (in Turkish)
14:55 – 15:10
Serdar POLAT1, Bülent ULUDAĞ2
1 Gazi University, Faculty of Dentistry, Prosthodontics, Ankara, Turkey
2 Ankara University, Faculty of Dentistry, Prosthodontics, Ankara, Turkey
15:10 – 15:25
Comparison of Mechanical Properties of Fixed Partial Dentures Fabricated with Different Computer Aided
Manufacturing Techniques (in English)
Recep UZGUR, Volkan ŞAHİN
Kırıkkale University, Faculty of Dentistry, Prosthodontics, Kırıkkale, Turkey
Study of Biomechanical Properties of Different Types of Dental Implants (in English)
15:25 – 15:40
Pitru Allma-ROXANA1, Alina DUTA2, Dragos POPA2
1 Universitatea de Medicina si Farmacie, Facultatea de Stomatologie, Craiova, Romania
2 Universitatea din Craiova, Facultatea de Mecanica, Craiova, Romania
Session II (Room B) / Biomaterials-1
Investigation of Characteristics and Bioactivity of TiO2 Layer Formed on Cobalt-Chrome Alloy (in Turkish)
14:10 – 14:25
Doğukan ÇETİNER1, Onur TAZEGÜL1, Erdem ATAR2, Hüseyin ÇİMENOĞLU1
1 İstanbul Technical University, Department of Metallurgical and Materials Engineering, İstanbul, Turkey
2 Gebze Institute of Technology, Department of Material Science and Engineering, Kocaeli, Turkey
Biomechanical Properties of Ca3(PO4)2 Compound Coated on Titanium (in Turkish)
Tuba ÇAYIR1, Yunus AKALTUN2, Onur ÇOMAKLI3, Ayhan ÇELİK3
14:25 – 14:40
1 Erzincan University, Department of Biomedical Engineering, Erzincan, Turkey
2 Erzincan University, Department of Electircal and Electronics Engineering, Erzincan, Turkey
3 Erzincan University, Department of Mechanical Engineering, Erzincan, Turkey
Investigation of Electrochemical and Semiconductivity Properties in SBF of Plasma Oxidized CoCrMo Alloy
(in Turkish)
Ayhan ÇELİK1, Tuba YETİM2, Mevra ASLAN3, Özgü BAYRAK3, Meltem GÖR4
14:40 – 14:55
1 Atatürk University, Department of Mechanical Engineering, Erzurum, Turkey
2 Erzurum Technical University, Department of Chemical Engineering, Erzurum, Turkey
3 Erzincan University, Department of Mechanical Engineering, Erzincan, Turkey
4 Erzincan University, Department of Electircal and Electronics Engineering, Erzincan, Turkey
Ion Release Problem in the Metallic Biomaterials (in Turkish)
14:55 – 15:10
İlhan ÇELİK
Gümüşhane University, Department of Mechanical Engineering, Gümüşhane, Turkey
15:10 – 15:25
Characterization and In Vitro Bioactivity of Calcium and Phosphorous Containing Titania Layer on Ti6Al4V
Alloy (in Turkish)
Dilek TEKER, Faiz MUHAFFEL, Hüseyin ÇİMENOĞLU
İstanbul Technical University, Department of Metallurgical and Materials Engineering, İstanbul, Turkey
-3-
Biocompatibility and Selection of Biomaterials (in Turkish)
15:25 – 15:40
Şevki Yılmaz GÜVEN
Süleyman Demirel University, Faculty of Engineering, Department of Mechanical Engineering, Isparta,
Turkey
15:40 – 16:00
TEA/COFFEE BREAK
Plenary Talk II - "The Nonlinear Mechanical Behavior of Bone: Experiments and Models" (Simultaneous
Translation Available)
16:00 – 16:40
Prof.Dr. Dwight Davy - Case Western Reserve University, Cleveland, OH, USA
Location: Prof.Dr. Lütfü Çakmakçı Congress Center, Room A / SDÜ West Campus
16:40 – 16:50
BREAK
Session III (Room A, Simultaneous Translation Available) / Orthopaedic Biomechanics-1
Use of Probabilistic Finite Element Analysis for Using Patient Specific Mini Screw (in Turkish)
16:50 – 17:05
Fatih MEDETALİBEYOĞLU1, İrfan KAYMAZ2, İlhan Metin DAĞSUYU3
1 Kafkas University, Faculty of Engineering and Architecture, Kars, Turkey
2 Erzurum Technical University, Faculty of Engineering, Erzurum, Turkey
3 Osmangazi University, Faculty of Dentistry, Eskişehir, Turkey
Definition of Vibration Effect on Bone Healing (in Turkish)
Oğuzhan AHAN1,2, Ergün BOZDAĞ2, Emin SÜNBÜLOĞLU2
17:05 – 17:20
1 Yıldız Technical University, Faculty of Mechanical Engineering, Department of Mechanical Engineering,
Beşiktaş, İstanbul, Turkey
2 İstanbul Technical University, Faculty of Mechanics, Department of Mechanical Engineering, Gümüşsuyu,
İstanbul, Turkey
Effects of Salter Pelvic Osteotomy Angle on Contact Area and Pressure Distribution in the Hip Joint: An
Experimental Study (in Turkish)
İbrahim MUTLU1, Levent UĞUR2, Talip ÇELİK1, Arif ÖZKAN3, Kaya MEMİŞOĞLU4, Yasin KİŞİOĞLU1
17:20 – 17:35
1 Kocaeli University, Faculty of Technology, Department of Biomedical Engineering, Kocaeli, Turkey
2 Amasya University, Amasya Technological Sciences Vocational High School, Automotive Technologies
Program, Amasya, Turkey
3 Düzce University, Faculty of Engineering, Department of Biomedical Engineering, Düzce, Turkey
4 Kocaeli University, Faculty of Medicine, Orthopaedics and Traumatology, Kocaeli, Turkey
The Modeling of Some Types of Implants and Prostheses Used for Osteointegration (in English)
17:35 – 17:50
Dragos – Laurentiu POPA1, Alina DUTA1, Pitru Allma – ROXANA2
1 Universitatea din Craiova, Facultatea de Mecanica, Craiova, Romania
2 Universitatea de Medicina si Farmacie, Facultatea de Stomatologie, Craiova, Romaiya
3D Tissue Scaffold Printing On Custom Artificial Bone Applications (in English)
17:50 – 18:05
Betül ALDEMIR1, Serkan DİKİCİ1, Sukru OZTURK2, Ozan KARAMAN1,2, Aylin Sendemir URKMEZ2, Hakan
OFLAZ1
1 Izmir Katip Celebi University, Faculty of Engineering and Architecture, Department of Biomedical
Engineering, İzmir, Turkey
2 Ege University, Faculty of Engineering, Department of Bioengineering, İzmir, Turkey
Session III (Room B) / Medical Devices and Biomedical Robots
16:50 – 17:05
Development of Transvaginal Uterus Amputation Device for Laparoscopic Hysterectomies in Gynaecologic
-4-
Surgeries (in English)
Serkan DİKİCİ1, Betül ALDEMİR1, Erkin GEZGİN2, Özgün BAŞER2, Savaş ŞAHİN3, Hakan ESER1, Utku
Kürşat ERCAN4, Bülent YILMAZ5,6, Sefa KELEKÇİ5, Hakan OFLAZ4
1 Izmir Katip Celebi University, Institute of Science, Department of Biomedical Technologies, Izmir, Turkey
2 Izmir Katip Celebi University, Department of Mechatronics Engineering, Izmir, Turkey
3 Izmir Katip Celebi University, Department of Electrical and Electronics Engineering, Izmir, Turkey
4 Izmir Katip Çelebi University, Department of Biomedical Engineering, Izmir, Turkey
5 Izmir Katip Çelebi University, Department of Obstetrics and Gynaecology, Faculty of Medicine, Izmir,
Turkey
6 Tepecik Training and Research Hospital, In vitro Fertilization Unit, Izmir, Turkey
Power Requirement and Energy Consumption Comparison of Antagonistic and Pretension Type Variable
Stiffness Actuator Designs for the Joints of Lower Extremity Exoskeleton Robots (in Turkish)
17:05 – 17:20
Hasbi KIZILHAN, Özgür BAŞER, Ergin KILIÇ, Necati ULUSOY
Süleyman Demirel University, Faculty of Engineering, Department of Mechanical Engineering, Isparta,
Turkey
17:20 – 17:35
Damping Coefficients and Torque Calculations for the Joint's Stability of Lower Extremity Exoskeleton
Robots (in Turkish)
Mehmet Alper DEMİRAY, Özgür BAŞER, Ergin KILIÇ
Süleyman Demirel University, Faculty of Engineering, Department of Mechanical Engineering, Isparta
Feature Extraction Methods for EEG Based Brain-Computer Interface Systems (in Turkish)
17:35 – 17:50
Mete YAĞANOĞLU, Ferhat BOZKURT, F. Baturalp GÜNAY
Atatürk University, Department of Computer Engineering, Erzurum, Turkey
Design of An Alginate Mixer with Automatically Mixing Unit (in Turkish)
17:50 – 18:05
Karani KURTULUŞ, Kenan TÜFEKCİ
Süleyman Demirel University, Faculty of Engineering, Department of Mechanical Engineering, Isparta,
Turkey
19:00 – 22:00
22:00 – 24:00
Gala Dinner
Location: Teras Park Restaurant – Isparta
Sports & Leisure Activities (Swimming Pool, Rose Bath, Sauna)
Location: 29 Ekim Swimming Pool / SDÜ East Campus
Friday, October 7, 2014
ENGLISH/TURKISH/ENGLISH simultaneous translations will be available in Room A.
Session IV (Room A, Simultaneous Translation Available) / Gait and Posture Biomechanics
Assessment of Performance of Muscles during Exercise as Revealed by EMG (in Turkish)
09:00 – 09:15
Bahattin KARAGÖZOĞLU
İstanbul Medeniyet University, Department of Electircal and Electronics Engineering, Üsküdar, İstanbul,
Turkey
Simulation of Giant Circles on High Bar (in Turkish)
09:15 – 09:30
Nihat ÖZGÖREN, Serdar ARITAN
Hacettepe University, Faculty of Sport Sciences, Biomechanics Research Group, Ankara, Turkey
09:30 – 09:45
Implementation of Torque Generators on A Human Rigid Body Model (in English)
Uğur GÜVEN, Ali Can AKMAN, Behzat B. KENTEL
-5-
Middle East Technical University, Northern Cyprus Campus, Department of Mechanical Engineering,
Kalkanlı, Güzelyurt, Turkish Republic of Northern Cyprus
In Vivo Verification of Different Hip Joint Center Estimation Methods in Gait Analysis For Healthy Subjects
(in English)
Abdollah YOUSEFI1,2, Ergin TÖNÜK1,2,3, Behzat B. KENTEL4
09:45 – 10:00
1 Middle East Technical University, Department of Biomedical Engineering, Ankara, Turkey
2 Middle East Technical University, Department of Mechanical Engineering, Ankara, Turkey
3 Middle East Technical University, Center of Excellence in Biomaterials and Tissue Engineering, Ankara,
Turkey
4 Middle East Technical University, Northern Cyprus Campus, Department of Mechanical Engineering,
Kalkanlı, Güzelyurt, Turkish Republic of Northern Cyprus
Session IV (Room B) / Orthopaedic Biomechanics-2
Finite Element Analysis of Locked And Unlocked Plate Fixation Methods In Tibial Diaphyseal Fractures (in
Turkish)
H. Ghahramanzadeh ASL1, Halim KOVACI1, Akgün ALSARAN1,2, İrfan KAYMAZ1, Ayhan ÇELİK1,3, Ömer
Selim YILDIRIM4
09:00 – 09:15
1 Atatürk University, Faculty of Engineering, Department of Mechanical Engineering, Erzurum, Turkey
2 Kafkas University, Mühendislik ve Mimarlık Fakültesi, Department of Mechanical Engineering, Kars,
Turkey
3 Erzincan University, Faculty of Engineering, Department of Mechanical Engineering, Erzincan, Turkey
4 Atatürk University, Faculty of Medicine, Orthopaedics and Traumatology, Erzurum, Turkey
A New Intramedullary Sustained Dynamic Compressive Nail For The Treatment of Long Bone Fractures: A
Biomechanical Study (in Turkish)
09:15 – 09:30
Ahmet KARAKAŞLI1, Orçun TAYLAN2, Salih ÇELİK2, İsmail S. SATOĞLU1, Hasan HAVITCIOĞLU1,2
1 Dokuz Eylül University, Faculty of Medicine, Orthopaedics and Traumatology, İzmir, Turkey
2 Dokuz Eylül University, Institute of Health Sciences, Biomechanics Division, İzmir, Turkey
Performance Analysis of Patient Specific and Traditional Tibial Knee Prosthesis Components (in Turkish)
İsmail Hakkı KORKMAZ1, İrfan KAYMAZ2, Ömer Selim YILDIRIM3
09:30 – 09:45
1 Iğdır University, Faculty of Engineering, Department of Mechanical Engineering, Iğdır, Turkey
2 Atatürk University, Faculty of Engineering, Department of Mechanical Engineering, Erzurum, Turkey
3 Atatürk University, Faculty of Medicine, Cerrahi Tıp Bilimleri, Orthopaedics and Traumatology, Erzurum,
Turkey
Combination of Retrograde Intramedullary Nail And Anatomic Distal Femur Locked Plate In Distal Femoral
Fractures: Comparison of The Mechanical Stability (in Turkish)
09:45 – 10:00
Onur BAŞCI1, Ahmet KARAKAŞLI1, Ortaç GÜRAN1, Erdem KUMTEPE2, Hasan HAVITCIOĞLU1,2
1 Dokuz Eylül University, Faculty of Medicine, Orthopaedics and Traumatology, İzmir, Turkey
2 Dokuz Eylül University, Institute of Health Sciences, Biomechanics Division, İzmir, Turkey
10:00 – 10:10
BREAK
Plenary Talk III - "A Clinician's Perspective on Sport Biomechanics" (Simultaneous Translation Available)
10:10 – 10:50
Prof.Dr. Feza Korkusuz - Hacettepe University, Ankara, Turkey
Location: Prof.Dr. Lütfü Çakmakçı Congress Center, Room A / SDÜ West Campus
10:50 – 11:10
TEA/COFFEE BREAK
Session V (Room A, Simultaneous Translation Available) / Biomaterials-2
-6-
11:10 – 11:25
Investigation Sintering Behaviour of Spray Dryed ZnO and PVA Doped Calcium Phosphate Based Bioceramic
Powders (in English)
Şeyma DUMAN, Burak ÖZKAL
İstanbul Technical University, Department of Metallurgical and Materials Engineering, İstanbul, Turkey
Vibration Analysis of Ceramic Cylindrical Panels coated with Functional Gradient Materials (in Turkish)
11:25 – 11:40
Abdullah H. SOFİYEV1, Zahit MECİTOGLU2, Polat ÖZYİĞİT1, Melis TAŞKIN1, Murat PINARLIK1,3, Ali Nadi
KAPLAN1
1 Süleyman Demirel University, Faculty of Engineering, Department of Civil Engineering, Isparta, Turkey
2 İstanbul Technical University, Department of Aerospace Engineering, İstanbul, Turkey
3 Gazi University, Faculty of Technology, Department of Civil Engineering, Ankara, Turkey
11:40 – 11:55
The Improvement of Fatigue and Fretting Fatigue Behaviour on Ti-6Al-4A Implant Material by Ball
Burnishing (in Turkish)
Emrah MELETLİOĞLU, Recep SADELER, Selçuk ATASOY
Atatürk University, Department of Mechanical Engineering, Erzurum, Turkey
The Effect of Temperature Plasma Nitriding on Wear and Magnetic Properties of 316L Implants Material (in
Turkish)
Mustafa YAZICI1, Fatih YILDIZ2, Ali Fatih YETİM2, Ayhan ÇELİK3
11:55 – 12:10
1 Atatürk University, Faculty of Engineering, Department of Nanoscience and Nano Engineering, Erzurum,
Turkey
2 Erzurum Technical University, Faculty of Architecture and Engineering, Department of Mechanical
Engineering, Erzurum, Turkey
3 Atatürk University, Faculty of Engineering, Department of Mechanical Engineering, Erzurum, Turkey
Estimating Electric Voltage Through The Motions of Electro-Active Polymer Based on Computer Vision (in
Turkish)
12:10 – 12:25
Mustafa Hakan BOZKURT1, Eyüp GEDİKLİ1, Mehmet İTİK2
1 Karadeniz Technical University, Department of Software Engineering, Trabzon, Turkey
2 Karadeniz Technical University, Department of Mechanical Engineering, Trabzon, Turkey
Session V (Room B) / Orthopaedic Biomechanics-3
Continuous Dynamic Compression Plate (in Turkish)
11:10 – 11:25
Ahmet KARAKAŞLI1, Orçun TAYLAN2, Eyad SKİAK3, Salih ÇELİK2, İsmail S. SATOĞLU1, Nihat D.
DEMİRKIRAN1, Hasan HAVITCIOĞLU1,2
1 Dokuz Eylül University, Faculty of Medicine, Orthopaedics and Traumatology, Izmir, Turkey
2 Dokuz Eylül University, Institute of Health Sciences, Biomechanics Division, Izmir, Turkey
3 Karataş Hospital, İzmir, Turkey
Dual Plating for Fixation of Humeral Shaft Fractures: Mechanical Comparison of Various Combinations of
Different Plate Lengths (in Turkish)
11:25 – 11:40
Ahmet KARAKAŞLI1, Onur BAŞCI1, Eyad SKİAK2, Fatih ERTEM3, Hasan HAVITCIOĞLU1,3
1 Dokuz Eylül University, Faculty of Medicine, Orthopaedics and Traumatology, İzmir, Turkey
2 Karataş Hospital, İzmir, Turkey
3 Dokuz Eylül University, Institute of Health Sciences, Biomechanics Division, İzmir, Turkey
Investigation of Dynamic Behavior of Cortical Bone Sterilized by Gamma Irradiation (in Turkish)
11:40 – 11:55
Kenan TÜFEKCİ1, Ramazan KAYACAN1, Cahit KURBANOĞLU2
1 Süleyman Demirel University, Department of Mechanical Engineering, Isparta, Turkey
2 Istanbul Medeniyet University, Department of Mechanical Engineering, İstanbul, Turkey
Determining The Optimum Screw Configuration For The Stabilization of Callus (in Turkish)
11:55 – 12:10
Abdullah Tahir ŞENSOY1, İrfan KAYMAZ1, Ümit ERTAŞ2
1 Atatürk University, Faculty of Engineering, Department of Mechanical Engineering, Erzurum, Turkey
2 Atatürk University, Faculty of Dentistry, Oral and Maxillofacial Surgery, Erzurum, Turkey
-7-
Distal Locking System of Intramedullary Nail: Designing a New Implant (in Turkish)
12:10 – 12:25
Halil İbrahim İMİROĞLU1, Cem SEVER2, İrfan KAYMAZ1
1 Atatürk University, Faculty of Engineering, Department of Mechanical Engineering, Erzurum, Turkey
2 Mevlana University, Faculty of Medicine, Orthopaedics and Traumatology, Konya, Turkey
13:00 – 14:10
Lunch (Faculty & Staff Cafeteria / SDÜ East Campus)
Plenary Talk IV - "Electrochemical Processing of Collagen for Mechanically Functional Musculoskeletal
Biomaterials" (Simultaneous Translation Available)
14:10 – 14:50
Prof.Dr. Ozan Akkuş - Case Western Reserve University, Cleveland, OH, USA
Location: Prof.Dr. Lütfü Çakmakçı Congress Center, Room A / SDÜ West Campus
14:50 – 15:10
TEA/COFFEE BREAK
Session VI (Room A, Simultaneous Translation Available) / Orthopaedic Biomechanics-4
Biomechanical Properties of Glass Ionomer Cement Used for Repair of Incudostapedial Joint Discontinuity
(in Turkish)
15:10 – 15:25
Ahmet ÜNAL1, Aylin BEKEM1, Ela ARAZ SERVER2, Zeynep ALKAN2, Ozgür YİĞİT2
1 Yıldız Technical University, Chemical-Metallurgical Faculty, Department of Metallurgical and Materials
Engineering, İstanbul, Turkey
2 İstanbul Training and Research Hospital, Department of Otolaryngology, İstanbul, Turkey
Improvement in The Design of a Multi-Joint Restricted Hip Prosthesis and Its Biomedical Properties (in
Turkish)
15:25 – 15:40
Cemal DİNÇER1,
HAVITÇIOĞLU1,2
Ahmet
KARAKAŞLI1,
Bora
UZUN2,
Fatih
ERTEM2,
Orçun
TAYLAN2,
Hasan
1 Dokuz Eylül University, Faculty of Medicine, Orthopaedics and Traumatology, İzmir, Turkey
2 Dokuz Eylül University, Institute of Health Sciences, Biomechanics Division, İzmir, Turkey
Designing a New TMJ Implant (in Turkish)
15:40 – 15:55
Halil İbrahim İMİROĞLU1, Zekeriya TOSUN2, İrfan KAYMAZ1, Cem SEVER3, Osman AKDAĞ2, M. Nebil
SELİMOĞLU2
1 Atatürk University, Faculty of Engineering, Department of Mechanical Engineering, Erzurum, Turkey
2 Selçuk University, Faculty of Medicine, lastic, Reconstructive and Aesthetic Surgery, Konya, Turkey
3 Mevlana University, Faculty of Medicine, Orthopaedics and Traumatology, Konya, Turkey
Test Bench Development for Femur Stability Assessment (in English)
15:55 – 16:10
Samuel SANCHEZ-CABALLERO, Barbara LLINARES, Rafael PLA FERRANDO, Miguel A. SELLES
Universitat Politecnica de Valencia, Department of Mechanical Engineering and Materials, Alcoy, Alicante,
SPAIN
Design and Optimization of Sinusoidal Formed Femur Prosthesis (in English)
16:10 – 16:25
Ahmet Zafer ŞENALP, Gökçe AKGÜN, Can CANPOLAT, Ahmet Sinan ÖKTEM, Özgür KALBARAN
Gebze Institute of Technology, Department of Mechanical Engineering, Gebze, Kocaeli, Turkey
Session VI (Room B) / Dental Biomechanics-2
15:10 – 15:25
Investigation of the Effects of Abutment and Implant Length on Stability of Short Dental Implants (in
English)
Eda ÖZYILMAZ1, Halil AYKUL2, Emre ÖZYILMAZ2, Mehmet DALKIZ3, M. Burak BİLGİN1
1 Amasya University, Faculty of Technology, Department of Mechanical Engineering, Amasya, Turkey
-8-
2 Hitit University, Faculty of Engineering, Department of Mechanical Engineering, Çorum, Turkey
3 Mustafa Kemal Üniversity, Faculty of Dentistry, Hatay, Turkey
Effects of Dental and Zygomatic Implants on Stress Distribution in Zygomatic Bone (in English)
Canan AKAY1, Suat YALUĞ2, Mehmet DALKIZ3
15:25 – 15:40
1 Prosthetic Specialist, Ankara, Turkey
2 Gazi University, Prosthodontics, Ankara, Turkey
3 Mustafa Kemal University, Prosthodontics, Hatay, Turkey
Comparison of Short Dental Implants Under Different Loading Conditions (in English)
15:40 – 15:55
Emre ÖZYILMAZ1, Halil AYKUL1, Eda ÖZYILMAZ2, Mehmet DALKIZ 3
1 Hitit Üniversity, Faculty of Engineering, Department of Mechanical Engineering, Çorum, Turkey
2 Amasya University, Faculty of Technology, Department of Mechanical Engineering, Amasya, Turkey
3 Mustafa Kemal Üniversity, Faculty of Dentistry, Hatay, Turkey
The Effects of Abutment Length And Prosthesis Filling Material on Dental İmplant System (in Turkish)
15:55 – 16:10
Sinan KÖSE, Hasan SOFUOĞLU
Karadeniz Technical University, Department of Mechanical Engineering, Trabzon, Turkey
16:10 – 16:25
An Investigation on a Damaged Mandible After Recovering the Deficiency by Using Abutments with
Different Lengths and Prosthesis Filling Material (in Turkish)
Sinan KÖSE, Hasan SOFUOĞLU
Karadeniz Technical University, Department of Mechanical Engineering, Trabzon, Turkey
16:25 – 16:35
BREAK
Plenary Talk V - "New Frontiers in BioMEMS: Neural Prosthetics
Micromachined Microelectrode Arrays" (Simultaneous Translation Available)
16:35 – 17:15
using
Glassy
Carbon-based
Assoc.Prof. Samuel Kinde Kassegne - San Diego State University, San Diego, CA, USA
Location: Prof.Dr. Lütfü Çakmakçı Congress Center / SDÜ West Campus
17:15 – 17:20
BREAK
17:20 – 17:30
Closing
Location: Prof.Dr. Lütfü Çakmakçı Congress Center / SDÜ West Campus
19:00 – 22:00
Dinner
Location: Mavi Göl Restaurant – Eğirdir/Isparta
22:00 – 24:00
Sports & Leisure Activities (Swimming Pool, Rose Bath, Sauna)
Location: 29 Ekim Swimming Pool / SDÜ East Campus
Saturday, October 18, 2014
Field Trip: The Ancient City of Sagalassos in Ağlasun, Burdur
09:00 – 14:00
Note that the weather in Sagalassos might be cold and rainy, so please bring proper clothing with you and
be ready to dress according to the weather.
-9-
Download

Wednesday, October 15, 2014 Thursday, October 16, 2014